Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Acid Injector

Universal - Pressure Washer Injector - Acid Injector

Acid Injectors are designed to handle more acidic cleaning chemicals, like muriatic acid, to clean tougher applications including concrete and brick. Select the acid injector you need for your pressure washer below.

Featured: 6 Items Sort by  Result's per page
 

Barens OEM Part

2.1mm Adjustable Acid Injector

Part Number: 1959
 
Specs
Size 2.1mm
Gallons Per Minute 3-4
Inlet 3/8" MPT
Outlet 3/8" MPT
PSI 3000
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Draw rate 0 to 20%, Ceramic ball for injecting acids
1/4" Hose Barb Chemical Port
Minimum 35% pressure drop for draw
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less

Fits Model

Replaces OEM
Universal :

Your Price:
$35.42
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1.8mm Adjustable Acid Injector

Part Number: 1958
 
Specs
Size 1.8mm
Gallons Per Minute 2-3
Temperature 194°F
Inlet 3/8" MPT
Outlet 3/8" MPT
PSI 3000
Draw rate 0 to 20%, Ceramic ball for injecting acids
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Minimum 35% pressure drop for draw
1/4" Hose Barb Chemical Port
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less

Fits Model

Replaces OEM
Universal :

Your Price:
$35.42
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

2.3mm GP High Draw Adjustable Acid Injector

Part Number: 5730
 
Specs
Equipment Type Pressure Washer
Up to 20% injestion Draw Rate
Temperature 190° F
Inlet 3/8" MPT
Outlet 3/8" MPT
1/4" Hose Barb Chemical Port
Made In The U.S.A
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
PSI 4500

Fits Model

Replaces OEM
Universal :

Your Price:
$24.28
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

2.3mm Adjustable Acid Injector

Part Number: 1960
 
Specs
Size 2.3mm
Gallons Per Minute 4-5
Inlet 3/8" MPT
Outlet 3/8" MPT
PSI 3000
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Draw rate 0 to 20%, Ceramic ball for injecting acids
Minimum 35% pressure drop for draw
1/4" Hose Barb Chemical Port
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
Temperature 194° F

Fits Model

Replaces OEM
Universal :

Your Price:
$35.42
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

2.1mm GP High Draw Adjustable Acid Injector

Part Number: 5668
 
Specs
Equipment Type Pressure Washer
Up to 20% injestion Draw Rate
Temperature 190° F
Inlet 3/8" MPT
Outlet 3/8" MPT
1/4" Hose Barb Chemical Port
Made In The U.S.A
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
PSI 4500

Fits Model

Replaces OEM
Universal :

Your Price:
$24.28
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1.8mm GP High Draw Adjustable Acid Injector

Part Number: 5786
 
Specs
Equipment Type Pressure Washer
Up to 20% injestion Draw Rate
Temperature 190° F
Inlet 3/8" MPT
1/4" Hose Barb Chemical Port
Made In The U.S.A
Outlet 3/8" MPT
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
PSI 4500

Fits Model

Replaces OEM
Universal :

Your Price:
$24.28
 
No Sales Tax, except in MD
Qty: