Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Sludge Pump

Universal - Pressure Washer Injector - Sludge Pump

Use a Sludge Pump to convert a pressure washer into a water pump. You can remove standing water or slurry by connecting a sludge pump to your pressure washer. Select a sludge pump below.

Featured: 1 Item Sort by  Result's per page
 

Barens OEM Part

ST36 4.5 Sludge Pump

Part Number: 2386
 
Specs
Orifice 4.5
Includes Pump, Quick Connect Plug, Clamp
Equipment Type Pressure Washer
Empty Rain Water From Construction Sites, Clean Up Chemical Spills or Remove Slurry From a Car Wash Bay at an 11:1 Ratio
Quick Connect Not Attached
Use with Spiraflex hose 1-1/2" (Barens order #4015 25 foot length). 3/8" Hansen plug on inlet. OPERATION: (1). The high pressure line of the pressure washer is connected to the sludge vacuum attachment. The operator may connect the high pressure hose to the sludge vacuum inlet, or choose to hook the wand to the inlet. Water flow can then be controlled with the trigger gun. The inlet is normally a 1/4" QC plug or M22 screw nipple for quick attachment. After securing the attachment, run the pressure washer as normally instructed. (2). When the pressure washer is running, the exits a zero degree high pressure nozzle inside the durable aluminum die casting. This nozzle should have the same size orifice as the normal fan nozzles to produce the maximum pressure and flow from the unit. The velocity of the water flow exiting the nozzle creates a powerful venturi suction. This suction power can pick up the slurry, along with rocks and devbris up to 3/4" in diameter. Ensure the outlet hose is directed proper and place the sludge vacuum into the flood waters. It may be submerged all the way to the floor. The casting has small feet on it to keep it off the floor. (3). The operator should grip the outlet hose firmly, or secure it close to the end. If not held, the force of 40 to 60 GPM of liquid flowing through the discharge hose may cause it to push around. The discharge hose is normally 15' to 25' long. Lengths of 100' can be purchased. Direct the discharge peoperly. Operators may need to check with authorities to see about discharging into a city drain. Many simply let it flow out onto lower ground, or dump it into a liquid tank truck. When the mucky water has been removed, the pressure washer can be used to finish the cleaning job.
Outlet 1/4" MPT

Fits Model

Replaces OEM
Universal :

Your Price:
$62.72
 
No Sales Tax, except in MD
Qty: