Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 18 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6570
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 2.88
Inlet 3/8" FPT
Outlet 1/4" FPT
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VB3K adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
IDEAL FOR ALL GENERAL CLEANING APPLICATIONS
Forged brass manifold with exclusive lifetime warranty
New, oversized connecting rods for ultimate crankcase performance
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original interpump unitized, stainless steel, K123 inlet and outlet valves
SAE J609 gasoline engine mounting flange
Rated Pump Speed: 3400 RPM
Stroke: 6.6mm
Crankcase Oil Capacity: 11.0 oz.
Maximum Fluid Temperature: 165 F.
Weight 11.4 lbs
Bore .591" (15mm)
Unloader: VB3KTT
Size 7.0" x 7.2" x 5.5"
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : TP2530J34

Replaces OEM
Universal :

On Sale!

Reg. Price: $486.08
$364.56
You Save $121.52
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2983
 
Specs
Equipment Type Pressure Washer
PSI 2200
Gallons Per Minute 3.0
Weight 18 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 4.5 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter.
Unloader: VRT3-160
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : VRT3-160

Replaces OEM
Universal :

On Sale!

Reg. Price: $605.72
$454.29
You Save $151.43
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3000
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 4.0
Weight 20.3 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankcase for easy right or left hand mounting
Solid brass manifolds
Hardened stainless steel piston guides
Highly efficient stainless steel check valves
Solid ceramic plungers
High and low pressure seals: high quality buna-textile packings
Additional anti-extrusion ring under the seal
Special forged brass oversized connecting rods
Die cast anodized aluminum crankcase
High quality ball bearings
Optimal oil bath for high speed operation
Maximum Pump speed: 3400 RPM
Minimum Horsepower Requirements: 12.75 hp for gas engines
Crankcase Capacity: 18 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break in period, then in 500 hour intervals thereafter.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
COMET : FWD4035G-VRT3-310EZ

Replaces OEM
Universal :

On Sale!

Reg. Price: $793.60
$595.20
You Save $198.40
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3631
 
Specs
Equipment Type Pressure Washer
PSI 3000
Gallons Per Minute 4.6
Weight 19.1 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Size 8.8" x 9.7" X 6.5"
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
Die cast, anodized aluminum, oil bath crankcase
Premium roller bearing
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Maximum Pump Speed: 3400 RPM
Maximum Inlet Pressure: 125 PSI
Stroke: 11mm (.433")
Crankcase Oil Capacity: 14.0 oz.
Maximum Fluid temperature: 165° F
Flanged for Direct Couple to Gasoline Engines
Flanged for Mounting on up to 13 Horsepower Engines
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : EZ3045G

Replaces OEM
Universal :

On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3696
 
Specs
Equipment Type Pressure Washer
PSI 3000
Gallons Per Minute 3.5
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Size 8.8" x 9.7" x 6.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
Die cast, anodized aluminum, oil bath crankcase
Premium roller bearing
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Direct Drive with Gas Flange
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 10.8 hp for gas engines
Stroke: .295" (7.5mm)
Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F
Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondtergent SAE 30W oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : EZ3035G-VRT3-250

Replaces OEM
Universal :

On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4588
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 3.0
Weight 18 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 7.5 hp for gas engines
Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Flange Gas Engine Flange
Built In Uniflow Unloader and Adjustable Chemical Injector
Ceramic Plungers Forged Brass Manifold
Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection.
Shaft Size Hollow 3/4" ID
Type Gas Flange Pump

Fits Model
COMET : LWD3025G

Replaces OEM
Universal :

On Sale!

Reg. Price: $427.50
$320.63
You Save $106.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4924
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.5
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.0" x 7.2" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive Pump
Maximum Inlet Pressure: 125 PSI
Minimum Horsepower Requirements: 5.3 hp for gas engine
Stroke: .315" (8mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 degrees F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VRT3-160
PSI 2000
Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With an Exclusive Lifetime Warranty
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : TT2035GBF

Replaces OEM
Universal :

On Sale!

Reg. Price: $555.72
$416.79
You Save $138.93
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5067
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 4.0
Weight 17.5 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Increased fin depth increases surface area to maximize heat dissipation
Stainless steel unitized check valves
Heat resistant solid ceramic plungers operating on lubricated packings
Direct Drive mounting flange
Reinforced crankcase for increased load capacity
Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures
One piece industrial grade oversized bronze connecting rods
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 13 hp for gas engines
Crankcase Capacity: 14 oz. use SAE 20W/30 oil
Piston: 15mm
Unloader: VRT3-310EZ
Flange Gas Engine Flange
Your Unloader and Pressure Relief Valve May Need to Be Adjusted Prior to Useage
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
COMET : ZWD4035G

Replaces OEM
Universal :

On Sale!

Reg. Price: $527.36
$395.52
You Save $131.84
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 5833
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.85
Weight 17 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.0" x 7.2" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VB3K adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive Gas Flange
Maximum Inlet Pressure: 125 PSI
Minimum Horsepower Requirements: 5.9 hp for gas engine
Stroke: .260" (6.6mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Lubrication: Fill the crankcase to oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VB3KTT
Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With An Exclusive Lifetime Warranty.
Maximum Fluid Temperature: 165° F
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : TT2028GBF

Replaces OEM
Universal :

On Sale!

Reg. Price: $532.98
$399.74
You Save $133.24
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump With Built In Unloader

Part Number: 5930
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.5
PSI 2000
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.0" x 7.2" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive Pump
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 5.3 hp for gas engine
Stroke: .315" (8mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 degrees F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VR54
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : VR54

Replaces OEM
Universal :

On Sale!

Reg. Price: $539.44
$404.58
You Save $134.86
(25% Off)
 
No Sales Tax, except in MD
Qty: