My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
Sun: 11am - 5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 1 Item Sort by  Result's per page
Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump 3467
Barens OEM PartMore Info

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3467
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 1500
Weight 14 lbs
Inlet 3/8" FPT
Outlet Dual 3/8" FPT
Bore .708" (18mm)
Size 9.13" x 6.65" x 6.50"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
We have added some features to the standard 2SFX. these include an inlet fitting, and pressure relief valve.
UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
Ultimate portability, less than 11 pounds, less than 10" long.
Regulating unloader is standard on each pump to assure system pressure control and pump protection
Maximum Inlet Pressure: 75 PSI
Maximum Pump Speed: 3450 RPM
Minimum Horsepower Requirements: 3.0 bhp
Stroke: .177" (4.5mm)
Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
Maximum Fluid Temperature: 160 Degrees F.
By-pass Port: 1/4" FPT
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.
High Temp Pump
Unloader: 7500XS
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model

Replaces OEM
Universal :

Your Price:
No Sales Tax, except in MD