Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 9 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 6195
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VB3K
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $582.50
$436.88
You Save $145.62
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2926
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.2" x 6.9" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive Pump with flange for electric motor
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.2 bhp
Stroke: .370" (9.4mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VRT3-160
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
GENERAL PUMP : T9051EBF

Replaces OEM
Universal :

On Sale!

Reg. Price: $564.32
$423.24
You Save $141.08
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2928
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-160
Flange Nema 56-C Flange
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forced Brass Manifold for Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $587.50
$440.63
You Save $146.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3119
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT-160
Shaft Size Hollow 5/8" ID
Electric Flange Pumps

Fits Model
COMET : LWD2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4572
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 24 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 2.2 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter
Unloader: VRT3-160
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Electric Flange Pumps
Gallons Per Minute 2.1

Fits Model
AR PUMPS : XTV2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $604.50
$453.38
You Save $151.12
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 5699
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.2" x 6.9" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive with Electric Flange
Maximum Inlet Pressure: 125 PSI
Minimum Horsepower Requirement: 2.2 bhp
Stroke: .197" (5mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 Degrees F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VB3K
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
GENERAL PUMP : TT9061EBF-VR54

Replaces OEM
Universal :

On Sale!

Reg. Price: $567.86
$425.90
You Save $141.96
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

5/8" Electric Flange Hollow Shaft Triplex Plunger Pump

Part Number: 5703
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.2" x 6.9" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive with Electric Flange
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 2.2 bhp
Stroke: .197" (5mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VRT3-160
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
GENERAL PUMP : TT9061EBF-VRT3-160

Replaces OEM
Universal :

On Sale!

Reg. Price: $542.10
$406.58
You Save $135.52
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 5753
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 24 lbs
Unloader: VB3K
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 2.2 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter.
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
AR PUMPS : XTV2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $592.60
$444.45
You Save $148.15
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 6041
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.2" x 6.9" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive Pump with flange for electric motor
Maximum Volume: 2.11 GPM
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.2 bhp
Stroke: .370" (9.4mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VR54
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
GENERAL PUMP : T9051EBF

Replaces OEM
Universal :

On Sale!

Reg. Price: $548.02
$411.02
You Save $137.00
(25% Off)
 
No Sales Tax, except in MD
Qty: