Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 12 Items Sort by  Result's per page
 

Barens OEM Part

3/4" Gas Flange Hollow Shaft Pump Made Ready

Part Number: 5923
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 2500
Weight 12 lbs
COMMERCIAL DUTY RADIAL-AXIAL PUMPS
Abrasion proof, heat resistant, industrial ceramic plungers
Stainless steel unitized check valves
Forged brass manifold
Industrial duty construction for extended life
Patent registered ball bearing design
Built-in garden hose adapter
Double sealing buna textile V-packing
Maximum Pump Speed: 3400 RPM
Shaft Size Hollow 3/4" ID
Type Hollow Shaft Pump

Fits Model
COMET : AXD3025G

Replaces OEM
Universal :

On Sale!

Reg. Price: $319.90
$239.93
You Save $79.97
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2968
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 3.0
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy right or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
Design for optimal operating temperature
High quality oversized bearings
Die-cast anodized aluminum chrankshaft fin
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 6.0 hp for gas engines
Crankcae Capacity: 9.87 oz use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VR54
Built In Uniflow Unloader and Adjustable Chemical Injector
Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection.
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Gas Flange Pumps

Fits Model
COMET : LWD3025G

Replaces OEM
Universal :

On Sale!

Reg. Price: $415.00
$311.25
You Save $103.75
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2983
 
Specs
Equipment Type Pressure Washer
PSI 2200
Gallons Per Minute 3.0
Weight 18 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 4.5 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter.
Unloader: VRT3-160
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : VRT3-160

Replaces OEM
Universal :

On Sale!

Reg. Price: $605.72
$454.29
You Save $151.43
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3467
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 1500
Weight 14 lbs
Inlet 3/8" FPT
Outlet Dual 3/8" FPT
Bore .708" (18mm)
Size 9.13" x 6.65" x 6.50"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
We have added some features to the standard 2SFX. these include an inlet fitting, and pressure relief valve.
UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
Ultimate portability, less than 11 pounds, less than 10" long.
Regulating unloader is standard on each pump to assure system pressure control and pump protection
Maximum Inlet Pressure: 75 PSI
Maximum Pump Speed: 3450 RPM
Minimum Horsepower Requirements: 3.0 bhp
Stroke: .177" (4.5mm)
Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
Maximum Fluid Temperature: 160 Degrees F.
By-pass Port: 1/4" FPT
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.
High Temp Pump
Unloader: 7500XS
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
CAT PUMPS : 2SFX30ES3

Replaces OEM
Universal :

On Sale!

Reg. Price: $839.48
$629.61
You Save $209.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4588
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 3.0
Weight 18 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 7.5 hp for gas engines
Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Flange Gas Engine Flange
Built In Uniflow Unloader and Adjustable Chemical Injector
Ceramic Plungers Forged Brass Manifold
Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection.
Shaft Size Hollow 3/4" ID
Type Gas Flange Pump

Fits Model
COMET : LWD3025G

Replaces OEM
Universal :

On Sale!

Reg. Price: $427.50
$320.63
You Save $106.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5321
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 3000
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Inlet 1/2" FPT
Outlet 3/8" FPT
Gallons Per Minute 5.5
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs.
Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life
High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type

Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal :

On Sale!

Reg. Price: $550.36
$412.77
You Save $137.59
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6049
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 3.0
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 6.5 Gas HP
Unloader: VRT3-250
Rail Kits: AR2729: 5/8" AR2633H: 2-5/8"
Flange Gas Engine Flange
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Grade 12.9 Bolts
A Special Thick Solid Ceramic Plunger for Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase, Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass Fill. Side and Bottom Drain Plugs
Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Inlet 1/2" FPT
Outlet 3/8" FPT
Shaft Size Hollow 3/4" ID
Type Gas Flange Pump

Fits Model
AR PUMPS : XMV3G27D

Replaces OEM
Universal :

On Sale!

Reg. Price: $559.76
$419.82
You Save $139.94
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6262
 
Specs
Equipment Type Pressure Washer
PSI 2200
Gallons Per Minute 3.0
Weight 18 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 4.5 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter.
Unloader: VR54
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Ceramic Plungers, Thicker Wall to Help Prevent Thermal Shock
Forged Precision Ground Crankcase
Stainless Steel Valve Seat.
O-Ring is Side Mounted
High Quality High Pressure Seals. New Low Pressure Seal With Built In Scraper.
Two Piece Piston Guides
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : XTV3G22D

Replaces OEM
Universal :

On Sale!

Reg. Price: $627.90
$470.93
You Save $156.97
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6301
 
Specs
Equipment Type Pressure Washer
PSI 3000
Gallons Per Minute 3.0
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a Bolt-on adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: Bolt On MV566
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Grade 12.9 Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal :

On Sale!

Reg. Price: $613.16
$459.87
You Save $153.29
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6424
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 3.0
Weight 19 lbs
Rail Kits: AR2729: 5/8" AR2633H: 2-5/8"
Unloader: Bolt On-AR20821
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a bolt-on adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Maximum Pump Speed: 3400 RPM
Horsepower: 6.5 Gas HP
Manifold: High strength forged brass for long term use.
Bolts: Eight 6mm grade 12.9
Plungers: A special thick solid ceramic for long life, strong durability and more resilience.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive sideand ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form material valve cages that are impervious to water absorption and provide long life and positive seating.
Seals and V-Packings: Continuously lubricating for extended life.
Plunger Rods: High strength stainless steel.
Connecting Rods: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.
Inlet 1/2" FPT
Outlet 3/8" FPT
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange

Fits Model
AR PUMPS : XMV3G27D

Replaces OEM
Universal :

On Sale!

Reg. Price: $592.28
$444.21
You Save $148.07
(25% Off)
 
No Sales Tax, except in MD
Qty: