Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 1 Item Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5321
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 3000
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Inlet 1/2" FPT
Outlet 3/8" FPT
Gallons Per Minute 5.5
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs.
Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life
High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type

Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal :

On Sale!

Reg. Price: $550.36
$412.77
You Save $137.59
(25% Off)
 
No Sales Tax, except in MD
Qty: