Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 14 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 6195
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VB3K
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $582.50
$436.88
You Save $145.62
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2926
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.2" x 6.9" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive Pump with flange for electric motor
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.2 bhp
Stroke: .370" (9.4mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VRT3-160
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
GENERAL PUMP : T9051EBF

Replaces OEM
Universal :

On Sale!

Reg. Price: $564.32
$423.24
You Save $141.08
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2928
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-160
Flange Nema 56-C Flange
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forced Brass Manifold for Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $587.50
$440.63
You Save $146.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3119
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT-160
Shaft Size Hollow 5/8" ID
Electric Flange Pumps

Fits Model
COMET : LWD2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3467
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 1500
Weight 14 lbs
Inlet 3/8" FPT
Outlet Dual 3/8" FPT
Bore .708" (18mm)
Size 9.13" x 6.65" x 6.50"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
We have added some features to the standard 2SFX. these include an inlet fitting, and pressure relief valve.
UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
Ultimate portability, less than 11 pounds, less than 10" long.
Regulating unloader is standard on each pump to assure system pressure control and pump protection
Maximum Inlet Pressure: 75 PSI
Maximum Pump Speed: 3450 RPM
Minimum Horsepower Requirements: 3.0 bhp
Stroke: .177" (4.5mm)
Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
Maximum Fluid Temperature: 160 Degrees F.
By-pass Port: 1/4" FPT
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.
High Temp Pump
Unloader: 7500XS
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
CAT PUMPS : 2SFX30ES3

Replaces OEM
Universal :

On Sale!

Reg. Price: $839.48
$629.61
You Save $209.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4572
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 24 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 2.2 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter
Unloader: VRT3-160
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Electric Flange Pumps
Gallons Per Minute 2.1

Fits Model
AR PUMPS : XTV2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $604.50
$453.38
You Save $151.12
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4769
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.2
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWS Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 11 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter
VRT3-160
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
COMET : LWS2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4962
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.0
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 11 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: MV540
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
COMET : LWS2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $408.68
$306.51
You Save $102.17
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Axial Commerical Duty Electric Flange Hollow Shaft Pump With Built In Unloader

Part Number: 5130
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.0
Weight 14 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600
COMMERCIAL DUTY RADIAL-AXIAL PUMP
Built-in Uniflow Unloader and chemical injector with inner stainless steel parts
Abrasion proof, heat resistant, industrial ceramic plungers
Stainless steel unitized check valves
Forged brass manifold
Industrial duty construction for extended life
Patent registered ball bearing design
Built-in garden hose adapter
Double sealing buna textile V-packing
Includes: Comet Pump AXD2020E
Maximum Pump Speed: 3400 RPM
Shaft Size Hollow 5/8" ID
Type Axial Shafts Pump

Fits Model
COMET : AXD2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $366.68
$275.01
You Save $91.67
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 5699
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 18 lbs
Inlet 3/8" FPT
Outlet 1/4" FPT
Bore .591" (15mm)
Size 7.2" x 6.9" x 5.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Forged brass manifold with exclusive lifetime warranty
Die cast, anodized aluminum, oil bath crankcase
Solid ceramic plungers with continuously lubricated packings
The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves
Ideal for all general cleaning, RO, and misting applications
Comes standard with NEMA 56C electric motor mounting flange
Also available in "L" left handed version
Direct Drive with Electric Flange
Maximum Inlet Pressure: 125 PSI
Minimum Horsepower Requirement: 2.2 bhp
Stroke: .197" (5mm)
Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 Degrees F.
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VB3K
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
GENERAL PUMP : TT9061EBF-VR54

Replaces OEM
Universal :

On Sale!

Reg. Price: $567.86
$425.90
You Save $141.96
(25% Off)
 
No Sales Tax, except in MD
Qty: