Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 3 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3467
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 1500
Weight 14 lbs
Inlet 3/8" FPT
Outlet Dual 3/8" FPT
Bore .708" (18mm)
Size 9.13" x 6.65" x 6.50"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
We have added some features to the standard 2SFX. these include an inlet fitting, and pressure relief valve.
UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
Ultimate portability, less than 11 pounds, less than 10" long.
Regulating unloader is standard on each pump to assure system pressure control and pump protection
Maximum Inlet Pressure: 75 PSI
Maximum Pump Speed: 3450 RPM
Minimum Horsepower Requirements: 3.0 bhp
Stroke: .177" (4.5mm)
Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
Maximum Fluid Temperature: 160 Degrees F.
By-pass Port: 1/4" FPT
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.
High Temp Pump
Unloader: 7500XS
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
CAT PUMPS : 2SFX30ES3

Replaces OEM
Universal :

On Sale!

Reg. Price: $839.48
$629.61
You Save $209.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Axial Commerical Duty Electric Flange Hollow Shaft Pump With Built In Unloader

Part Number: 5130
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.0
Weight 14 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600
COMMERCIAL DUTY RADIAL-AXIAL PUMP
Built-in Uniflow Unloader and chemical injector with inner stainless steel parts
Abrasion proof, heat resistant, industrial ceramic plungers
Stainless steel unitized check valves
Forged brass manifold
Industrial duty construction for extended life
Patent registered ball bearing design
Built-in garden hose adapter
Double sealing buna textile V-packing
Includes: Comet Pump AXD2020E
Maximum Pump Speed: 3400 RPM
Shaft Size Hollow 5/8" ID
Type Axial Shafts Pump

Fits Model
COMET : AXD2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $366.68
$275.01
You Save $91.67
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" AXD Gas Flange Hollow Shaft Pump With Built In Unloader

Part Number: 6139
 
Specs
Equipment Type Pressure Washer
PSI 2400
Gallons Per Minute 2.4
Weight 14 lbs
Inlet 3/4" FGH
Outlet 3/8" MPT
Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
COMMERCIAL DUTY RADIAL-AXIAL PUMP
Built-in Uniflow Unloader and chemical injector with inner stainless steel parts
Abrasion proof, heat resistant, industrial ceramic plungers
Stainless steel unitized check valves
Forged brass manifold
Industrial duty construction for extended life
Patent registered ball bearing design
Built-in garden hose adapter
Double sealing buna textile V-packing
RPM: 3400 maximum
Piston: 14mm
Includes: Comet Pump AXD2524G
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Axial Shafts Pump

Fits Model
COMET : AXD2524G

Replaces OEM
Universal :

On Sale!

Reg. Price: $368.14
$276.11
You Save $92.03
(25% Off)
 
No Sales Tax, except in MD
Qty: