Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 9 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 6195
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VB3K
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $582.50
$436.88
You Save $145.62
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2928
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-160
Flange Nema 56-C Flange
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forced Brass Manifold for Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
Universal :

On Sale!

Reg. Price: $587.50
$440.63
You Save $146.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3119
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT-160
Shaft Size Hollow 5/8" ID
Electric Flange Pumps

Fits Model
COMET : LWD2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4769
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.2
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWS Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 11 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter
VRT3-160
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
COMET : LWS2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4962
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 2.0
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy righ or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
High quality oversized bearings
Design for optimal operating temperature
Die-cast anodized aluminum chrankshaft fin
LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting.
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 3.0 bhp
Crankcase Capacity: 11 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: MV540
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
COMET : LWS2020E

Replaces OEM
Universal :

On Sale!

Reg. Price: $408.68
$306.51
You Save $102.17
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5321
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 3000
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Inlet 1/2" FPT
Outlet 3/8" FPT
Gallons Per Minute 5.5
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs.
Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life
High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type

Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal :

On Sale!

Reg. Price: $550.36
$412.77
You Save $137.59
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6049
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 3.0
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 6.5 Gas HP
Unloader: VRT3-250
Rail Kits: AR2729: 5/8" AR2633H: 2-5/8"
Flange Gas Engine Flange
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Grade 12.9 Bolts
A Special Thick Solid Ceramic Plunger for Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase, Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass Fill. Side and Bottom Drain Plugs
Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Inlet 1/2" FPT
Outlet 3/8" FPT
Shaft Size Hollow 3/4" ID
Type Gas Flange Pump

Fits Model
AR PUMPS : XMV3G27D

Replaces OEM
Universal :

On Sale!

Reg. Price: $559.76
$419.82
You Save $139.94
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6301
 
Specs
Equipment Type Pressure Washer
PSI 3000
Gallons Per Minute 3.0
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a Bolt-on adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: Bolt On MV566
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Grade 12.9 Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal :

On Sale!

Reg. Price: $613.16
$459.87
You Save $153.29
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6424
 
Specs
Equipment Type Pressure Washer
PSI 2500
Gallons Per Minute 3.0
Weight 19 lbs
Rail Kits: AR2729: 5/8" AR2633H: 2-5/8"
Unloader: Bolt On-AR20821
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a bolt-on adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Maximum Pump Speed: 3400 RPM
Horsepower: 6.5 Gas HP
Manifold: High strength forged brass for long term use.
Bolts: Eight 6mm grade 12.9
Plungers: A special thick solid ceramic for long life, strong durability and more resilience.
Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive sideand ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form material valve cages that are impervious to water absorption and provide long life and positive seating.
Seals and V-Packings: Continuously lubricating for extended life.
Plunger Rods: High strength stainless steel.
Connecting Rods: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.
Inlet 1/2" FPT
Outlet 3/8" FPT
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange

Fits Model
AR PUMPS : XMV3G27D

Replaces OEM
Universal :

On Sale!

Reg. Price: $592.28
$444.21
You Save $148.07
(25% Off)
 
No Sales Tax, except in MD
Qty: