Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 4 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2968
 
Specs
Equipment Type Pressure Washer
PSI 2000
Gallons Per Minute 3.0
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankshaft for easy right or left hand mounting
Forged bronze connecting rods with lifetime warranty
Hardened stainless steel piston guides
High efficiency stainless steel check valves
Abrasion proof, heat resistant, industrial ceramic plungers
High quality buna-textile double sealing v-packings
Design for optimal operating temperature
High quality oversized bearings
Die-cast anodized aluminum chrankshaft fin
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 6.0 hp for gas engines
Crankcae Capacity: 9.87 oz use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VR54
Built In Uniflow Unloader and Adjustable Chemical Injector
Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection.
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Gas Flange Pumps

Fits Model
COMET : LWD3025G

Replaces OEM
Universal :

On Sale!

Reg. Price: $415.00
$311.25
You Save $103.75
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 2992
 
Specs
Equipment Type Pressure Washer
PSI 3000
Gallons Per Minute 4.0
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Size 8.8" x 9.7" x 6.5"
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
Die cast, anodized aluminum, oil bath crankcase
Premium roller bearing
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Direct Drive with Gas Flange
Maximum Inlet Pressure: 125 PSI
Stroke: .374" (9.5mm)
Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F
Lubrication: Fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change the oil afte 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Flanged For Mounting on Up To 13 Horsepower Engines
Maximum Inlet Pressure 125 PSI
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Gas Flange Pumps

Fits Model
GENERAL PUMP : EZ3040G

Replaces OEM
Universal :

On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3696
 
Specs
Equipment Type Pressure Washer
PSI 3000
Gallons Per Minute 3.5
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Size 8.8" x 9.7" x 6.5"
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
Die cast, anodized aluminum, oil bath crankcase
Premium roller bearing
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Direct Drive with Gas Flange
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 10.8 hp for gas engines
Stroke: .295" (7.5mm)
Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F
Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondtergent SAE 30W oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
GENERAL PUMP : EZ3035G-VRT3-250

Replaces OEM
Universal :

On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6163
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .512" (13mm)
Size 8.8" x 9.7" x 6.5"
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
Die cast, anodized aluminum, oil bath crankcase
Premium roller bearing
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Maximum Pump Speed: 3400 RPM
Stroke: 13mm
Crankcase Oil Capacity: 14 oz
Maximum Fluid Temperature: 165° F
Flange Gas Engine Flange
Shaft Size Hollow 1" ID
Type Gas Flange Pump

Fits Model
GENERAL PUMP : EZ4040G

Replaces OEM
Universal :

On Sale!

Reg. Price: $587.06
$440.30
You Save $146.76
(25% Off)
 
No Sales Tax, except in MD
Qty: