Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 2 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6343
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 21 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .708" (18mm)
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 14.3 GHP
Maximum pump speed: 3400 RPM
Stroke: 7.0 mm
Maximum fluid temperature: 140° F
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Nickel Plated Forged Brass Manifold For Strength and No Porosity. Long Life and Higher Hydrostatic Pressure Safety and Performance. Inlet and Discharge Ports, Heavy Bosses for Added Strength. Offset Discharge Ports. High Efficiency Smooth Flow.
Eight 8mm Grade 8.8 Bolts
Valves: - Machined brass . - Ultra Form Cages: Durable, strength, and long life. - Poppets, Seat and Spring: 303 and 400 series stainless steel.
Packing and Plungers: - High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. - Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life. - Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen)
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special allow aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
Oil Capacity: 15.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : RKV4G40HD

Replaces OEM
Universal :

On Sale!

Reg. Price: $789.66
$592.25
You Save $197.41
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6589
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 21 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .708" (18mm)
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 14.3 GHP
Maximum pump speed: 3400 RPM
Stroke: 7.0 mm
VRT3-310EZ adjustable unloader with built in easy start valve
Maximum fluid temperature: 140° F
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
New Ceramic Plungers, Thicker Wall To Help Prevent Thermal Shock
Forged Precision Ground Crankcase
Stainless Steel Valves
Valve Seat O-Ring is Side Mounted
High Quality High Pressure Seals. New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
New Connecting Rod With 12% More Load Surface. Large Side Cover Sight Glass, Over Sized Bearing, Rear Cover Oil Drain
Type Gas Flange Pump

Fits Model
AR PUMPS : RRV4G40D

Replaces OEM
Universal :

On Sale!

Reg. Price: $491.00
$368.25
You Save $122.75
(25% Off)
 
No Sales Tax, except in MD
Qty: