Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 5 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3000
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 4.0
Weight 20.3 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Reversible crankcase for easy right or left hand mounting
Solid brass manifolds
Hardened stainless steel piston guides
Highly efficient stainless steel check valves
Solid ceramic plungers
High and low pressure seals: high quality buna-textile packings
Additional anti-extrusion ring under the seal
Special forged brass oversized connecting rods
Die cast anodized aluminum crankcase
High quality ball bearings
Optimal oil bath for high speed operation
Maximum Pump speed: 3400 RPM
Minimum Horsepower Requirements: 12.75 hp for gas engines
Crankcase Capacity: 18 oz. use SAE 20W/30 oil
Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break in period, then in 500 hour intervals thereafter.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
COMET : FWD4035G-VRT3-310EZ

Replaces OEM
Universal :

On Sale!

Reg. Price: $793.60
$595.20
You Save $198.40
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 4418
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 5.6
Weight 32 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .787" (20mm)
Size 12.2" x 9.2" x 6.9"
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor or gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, athermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Maximum Pump Speed: 1125/1450 RPM
Minimum Horsepower Requirements: 11.5 bhp (17.3 hp for gas engines)
Stroke: .630" (16mm)
Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F
Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter
Shaft Size .945" (24mm)
Type Solid Shaft Pump

Fits Model
GENERAL PUMP : TS2021NP

Replaces OEM
Universal :

On Sale!

Reg. Price: $931.86
$698.90
You Save $232.96
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5067
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 4.0
Weight 17.5 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Increased fin depth increases surface area to maximize heat dissipation
Stainless steel unitized check valves
Heat resistant solid ceramic plungers operating on lubricated packings
Direct Drive mounting flange
Reinforced crankcase for increased load capacity
Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures
One piece industrial grade oversized bronze connecting rods
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 13 hp for gas engines
Crankcase Capacity: 14 oz. use SAE 20W/30 oil
Piston: 15mm
Unloader: VRT3-310EZ
Flange Gas Engine Flange
Your Unloader and Pressure Relief Valve May Need to Be Adjusted Prior to Useage
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
COMET : ZWD4035G

Replaces OEM
Universal :

On Sale!

Reg. Price: $527.36
$395.52
You Save $131.84
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 6665
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 4.0
Weight 32 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .787" (20mm)
Size 12.2" x 9.2" 6.9"
Unloader: BP9EZ
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1450 RPM
Minimum Horsepower Requirements: 6.8 bhp (10.3 hp for gas engines)
Stroke: .472" (12mm)
Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165° F
Lubrication: Fill crancase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Type Solid Shaft Pumps
Shaft Size .945" (24mm)

Fits Model
GENERAL PUMP : TS1511-BP9EZ

Replaces OEM
Universal :

On Sale!

Reg. Price: $996.30
$747.23
You Save $249.07
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 6680
 
Specs
Equipment Type Pressure Washer
PSI 3500
Gallons Per Minute 4.0
Weight 41 lbs
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor or gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Manifold with fine thread valve caps
The preferred pump frame in the pressure cleaning industry
Forged brass manifold with an exclusive lifetime warranty
Large capacity, die-cast , anodized aluminum oil-bath crankcase
Over-sized connecting rods for maximum life
Heavy duty tapered roller bearing
Solid ceramic plungers with continuously lubricated packings
Unitized stainless steel inlet and discharge valves
Designed for suction applications
Shaft Size .945" (24mm)
Type Solid Shaft Pump

Fits Model
GENERAL PUMP : TSS1511

Replaces OEM
Universal :

On Sale!

Reg. Price: $839.60
$629.70
You Save $209.90
(25% Off)
 
No Sales Tax, except in MD
Qty: