Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Pumps Made Ready

Universal - Pumps - Pumps Made Ready

Pumps Made Ready: Pumps Made-Ready can conveniently replace your old pump. They have all the components already installed to replace your pump. Simply remove your old pump and slide the pump made-ready into the pressure washer. Adjustable unloaders, a built-in easy start valve, and a thermal relief valve are included in most to help to prevent overheating for a longer pump life.

Featured: 8 Items Sort by  Result's per page
 

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6143
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 3.5
Weight 16 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 11.05 GHP
Maximum pump speed: 3400 RPM
Stroke: 8.2 mm
Maximum fluid temperature: 140° F
Crankcase oil capacity: 14.6 oz
Crankshaft ID stamp: 8
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pumps

Fits Model
AR PUMPS : SXMV3G40D

Replaces OEM
Universal :

On Sale!

Reg. Price: $626.62
$469.97
You Save $156.65
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6163
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 20 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .512" (13mm)
Size 8.8" x 9.7" x 6.5"
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Solid ceramic plungers
Standard SAE J609 gasoline mounting flange for up to 13 hp engines
Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating
Die cast, anodized aluminum, oil bath crankcase
Premium roller bearing
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Maximum Pump Speed: 3400 RPM
Stroke: 13mm
Crankcase Oil Capacity: 14 oz
Maximum Fluid Temperature: 165° F
Flange Gas Engine Flange
Shaft Size Hollow 1" ID
Type Gas Flange Pump

Fits Model
GENERAL PUMP : EZ4040G

Replaces OEM
Universal :

On Sale!

Reg. Price: $587.06
$440.30
You Save $146.76
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6259
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 16 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Unloader AL607EZ
Bore .591" (15mm)
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 11.05 GHP
Maximum pump speed: 3400 RPM
Stroke: 8.2 mm
Maximum fluid temperature: 140° F
Crankcase oil capacity: 14.6 oz
Crankshaft ID stamp: 8
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pumps

Fits Model
AR PUMPS : SMXV4G40D

Replaces OEM
Universal :

On Sale!

Reg. Price: $620.78
$465.59
You Save $155.19
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6268
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 3.5
Weight 16 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .591" (15mm)
Unloader: AL607EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRt3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 11.05 GHP
Maximum pump speed: 3400 RPM
Stroke: 8.2 mm
Maximum fluid temperature: 140° F
Crankcase oil capacity: 14.6 oz
Crankshaft ID stamp: 8
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Grade 12.9 Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life
High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pumps

Fits Model
AR PUMPS : SXMV3.5G40D

Replaces OEM
Universal :

On Sale!

Reg. Price: $626.62
$469.97
You Save $156.65
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6343
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 21 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .708" (18mm)
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 14.3 GHP
Maximum pump speed: 3400 RPM
Stroke: 7.0 mm
Maximum fluid temperature: 140° F
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Nickel Plated Forged Brass Manifold For Strength and No Porosity. Long Life and Higher Hydrostatic Pressure Safety and Performance. Inlet and Discharge Ports, Heavy Bosses for Added Strength. Offset Discharge Ports. High Efficiency Smooth Flow.
Eight 8mm Grade 8.8 Bolts
Valves: - Machined brass . - Ultra Form Cages: Durable, strength, and long life. - Poppets, Seat and Spring: 303 and 400 series stainless steel.
Packing and Plungers: - High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. - Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life. - Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized tapered roller bearing for maximum life and load disbursement.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen)
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special allow aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase.
Oil Capacity: 15.5 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : RKV4G40HD

Replaces OEM
Universal :

On Sale!

Reg. Price: $789.66
$592.25
You Save $197.41
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6553
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 17 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Increased fin depth increases surface area to maximize heat dissipation
Stainless steel unitized check valves
Heat resistant solid ceramic plungers operating on lubricated packings
Direct Drive mounting flange
Reinforced crankcase for increased load capacity
Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures
One piece industrial grade oversized bronze connecting rods
Maximum pump speed: 3400 RPM
Bore .591" (15mm)
Crankcase oil capacity: 11 oz.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
COMET : ZWD4040G

Replaces OEM
Universal :

On Sale!

Reg. Price: $539.90
$404.93
You Save $134.97
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 5554
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 27 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Crankcase: die-cast aluminum alloy for protection against corrosion
Piston guides are heat treated stainless steel
Highly efficient stainless steel check valves
Solid ceramic plungers
Brass manifold, forged for maximum strength and longer life up to 4000 PSI
One piece solid bronze alloy connection rods
Oil cap: new travel/working oil cap
High quality tapered roller bearings
Large oil capacity dissipates heat and improves lubrication for longer life
Long life seals
1450 RPM maximum
165° F Maximum Temperature
Oil capacity: 25 oz.
Shaft Size .945" (24mm)

Fits Model
COMET : RW4040S

Replaces OEM
Universal :

On Sale!

Reg. Price: $780.00
$585.00
You Save $195.00
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6589
 
Specs
Equipment Type Pressure Washer
PSI 4000
Gallons Per Minute 4.0
Weight 21 lbs
Inlet 1/2" FPT
Outlet 3/8" FPT
Bore .708" (18mm)
Unloader: VRT3-310EZ
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Horsepower: 14.3 GHP
Maximum pump speed: 3400 RPM
Stroke: 7.0 mm
VRT3-310EZ adjustable unloader with built in easy start valve
Maximum fluid temperature: 140° F
Crankcase oil capacity: 15 oz
Crankshaft ID stamp: 8
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
New Ceramic Plungers, Thicker Wall To Help Prevent Thermal Shock
Forged Precision Ground Crankcase
Stainless Steel Valves
Valve Seat O-Ring is Side Mounted
High Quality High Pressure Seals. New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
New Connecting Rod With 12% More Load Surface. Large Side Cover Sight Glass, Over Sized Bearing, Rear Cover Oil Drain
Type Gas Flange Pump

Fits Model
AR PUMPS : RRV4G40D

Replaces OEM
Universal :

On Sale!

Reg. Price: $491.00
$368.25
You Save $122.75
(25% Off)
 
No Sales Tax, except in MD
Qty: