Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

1/2" X 1/2" MPT High Limit Switch 1440

Barens 1/2" X 1/2" MPT High Limit Switch

Part#: 1440


Barens OEM Part

$33.82


No Sales Tax!

Qty:


Description

1/2" X 1/2" MPT High Limit Switch

Fits Model

N/A

Replaces OEM

Universal

Specs

Temperature 230°F
Color Yellow
Size 1/2" Conduit X 1/2" MPT
A High Temperature Limit Switch is used on hot water pressure washers to prevent excessive water temperature. The switch is a bi-metallic, non-adjustable thermostat. When the bi-metallic sensor expands and bends, it breaks an electrical circuit when the water reaches a pre-set temperature. When the switch cools, the metal contracts and the circuit is again completed.
The sensor consists of two strips of metal bonded together. The strips expand at different rates when the temperature increases. The differing expansion rate of the two metals allows the sensor to bend. Normally the bi-metallic sensor will touch another contact. The control circuit runs through this connection. As the temperature rises, the bi-metallic sensor bends away from the contact and the circuit is broken, cutting power to the fuel solenoid.
NOTE: The thermostat will not reset until all areas surrounding the part cool down. This may result in a temperature drop of up to 50 degrees before the thermostat resets and starts the burner.
25 amp
Volt 110 Volt
Equipment Type Pressure Washer
Didn't Find your Part?
Need Help Finding Your Part?
HOT SAVINGS!
Featured Offers

Lawn Mower Parts!


Large selection of Lawn Mower Parts for all the major Manufacturers!

Lawn Mower Parts

Popular DIY Info!

DO-IT-Yourself!


Tons of videos and information on regular maintenance for Outdoor Power Equipment

DO-IT-YOURSELF