Over 1,000,000 Orders Shipped Since 1997!

1/2" X 3/8" MPT High Limit Switch 1444

Barens 1/2" X 3/8" MPT High Limit Switch

Part#: 1444

There are no reviews at this time.

Barens OEM Part


No Sales Tax!



1/2" X 3/8" MPT High Limit Switch

Fits Model


Replaces OEM



Temperature 230°F
Color Yellow
Size 1/2" Conduit X 3/8" MPT
A High Temperature Limit Switch is used on hot water pressure washers to prevent excessive water temperature. The switch is a bi-metallic, non-adjustable thermostat. When the bi-metallic sensor expands and bends, it breaks an electrical circuit when the water reaches a pre-set temperature. When the switch cools, the metal contracts and the circuit is again completed.
The sensor consists of two strips of metal bonded together. The strips expand at different rates when the temperature increases. The differing expansion rate of the two metals allows the sensor to bend. Normally the bi-metallic sensor will touch another contact. The control circuit runs through this connection. As the temperature rises, the bi-metallic sensor bends away from the contact and the circuit is broken, cutting power to the fuel solenoid.
NOTE: The thermostat will not reset until all areas surrounding the part cool down. This may result in a temperature drop of up to 50 degrees before the thermostat resets and starts the burner.
25 amp
Volt 110 Volt
Equipment Type Pressure Washer

Reviews for the 1/2" X 3/8" MPT High Limit Switch

There are no reviews for this product at the time.
Need Help Finding Your Part?
Parts Lookup
Commercial Savings
Featured Offers

Lawn Mower Parts!

Featured Offer
Large selection of Lawn Mower Parts for all the major Manufacturers!

Lawn Mower Parts

Popular DIY Info!


Tons of videos and information on regular maintenance for Outdoor Power Equipment