Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

TMT Flow Switch With Pilot Feature 5193

Barens TMT Flow Switch With Pilot Feature

Part#: 5193


Barens OEM Part

$141.00


No Sales Tax!

Qty:


Description

TMT Flow Switch With Pilot Feature

Fits Model

N/A

Replaces OEM

General Pump 100879
Universal

Specs

Temperature 40°-180° F Operating Temperature
Inlet 3/8" FPT
Pilot: 1/4" hose barb
Lead length: 48" 18awg
Electrical service life: 200,000 operations
Micro switch technology eliminates reed switch
Highpressure inline flow switch
Activates with as little as .5 gpm flow
Minimal pressure drop up to 12 gpm
Mount in vertical position
250 VAC switching voltage maximum
5 Amps switching current maximum
30 OHM contact resistance with leads
200,000 operations electrical service life
10 million operations mechanical service life
Install the flow switch VERTICALLY to the output side of the unloader, with the 2 conductor lead wires exiting from the top. If your system uses a downstream chemical injector, it should be mounted on the output side of the flow switch. Pilot model requires a direct connection to the water supply feed line to provide a pilot signal. This is accomplished by installing a tee fitting (with a 1/4" hose barb fitting) directly in the water supply feed line. The tube must be installed before the float valve. Install an appropriate length of 1/4" ID reinforced polyvinyl tubing between the tee fitting and the valve pilot port.
Gallons Per Minute 12
Outlet 3/8" FPT
Equipment Type Pressure Washer
PSI 4000
Didn't Find your Part?
Need Help Finding Your Part?
HOT SAVINGS!
Featured Offers

Lawn Mower Parts!


Large selection of Lawn Mower Parts for all the major Manufacturers!

Lawn Mower Parts

Popular DIY Info!

DO-IT-Yourself!


Tons of videos and information on regular maintenance for Outdoor Power Equipment

DO-IT-YOURSELF