Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

AR Pumps Made Ready

AR  - Pumps - Pumps Made Ready

Replace your AR Pumps pressure washer pump quickly with a Pump Made Ready. A Made-Ready pressure washer pump is equipped with the injectors, valves and unloaders already installed. You won't have to purchase and hook up the parts separately! With Pumps Made Ready, you can get your pressure washer back up and running in far less time! Just unbolt the old pump and slide on the Ready-Made pump.

Featured: 17 Items Sort by  Result's per page
 

Barens OEM Part

3/4" Gas Flange Axial Shaft Pumps Made Ready

Part Number: 6108
 
Specs
Equipment Type Pressure Washer
PSI 2500
Shaft Size 3/4"
Gallons Per Minute 2.5
Weight 7.5 lbs
Manifold: Aluminum prescision die cast special anticorrosion finish, brass and forged
Crankcase: Precision die cast, large coupling fins
Bearings: Premium oversized ball and needle bearings
Valves, Seats, and Springs: Plastic poppet seat and cage, stainless steel spring
Seals: Buna N-2000 double seals
2500 PSI maximum
140F maximum temperature
Oil capacity 3.5 oz
Flange width: 4-1/4"
Total Depth: 7"
Front width: 6-1/4"
Height: 5-5/8"
3400 RPM
Flange Gas Engine Flange
Inlet Female Garden Hose
Outlet 22mm/14mm Male (Accepts Female Screw Connect)
Includes Thermal Relief Valve
Built-In Pressure Control And Chemical Injector
Pump Is Prefilled With Oil
Type Axial Shafts Pump

Fits Model
AR PUMPS : RMV2.5G30D

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $215.00
$161.25
You Save $53.75
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

3/4" Gas Flange Axial Shaft Pump Made Ready

Part Number: 6444
 
Specs
Equipment Type Pressure Washer
PSI 2500
Shaft Size 3/4"
Gallons Per Minute 2.5
Weight 11 lbs
Inlet 1/2" MPT
Outlet 3/8" MPT
High strength forged brass manifold for long term use
Three 10mm grade 8.8 bolts
Ceramic coated stainless steel pistons for longer life in harsh environments
Angular contact ball bearings stabilizes the cranshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All are made of heat treated steel for extended life.
Stainless steel valves, seats, and springs with specially designed ultra form cages to provide extra long life and positive seating
Continuously lubricating seals and v-packings for extended life
Built-in unloader to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector.
SPECIAL NOTE: Use synthetic oil only. (part#6601). DO NOT change oil. Ue oil only to add if low. This oil is specially formulated synthetic oil with special additives for the demands ov the XJ pump series. No other oil is factory approved for this pump, and could result in pump failure.
Maximum pump speed: 3400 RPM
Stroke: 5.8mm
Maximum fluid temperature: 140° F
Crancase oil capacity: 4.5 oz.
Bore .591" (15mm)
Type Axial Shafts Pump

Fits Model
AR PUMPS : SJV2.5G27D

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $376.22
$282.17
You Save $94.05
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6044
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 2.5
PSI 2700
Weight 11 lbs
Inlet 1/2" MPT
Outlet 3/8" MPT
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a built-in pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Maximum pump speed: 3400 RPM
Stroke: 5.8mm
Maximum fluid temperature: 140 F
Crancase oil capacity: 4.5 oz.
Bore .591" (15mm)
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Axial Shafts Pump

Fits Model
AR PUMPS : SJV25G27D

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $392.04
$294.03
You Save $98.01
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump With Built In Unloader

Part Number: 6141
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 2.5
PSI 2500
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600
Maximum Pump Speed: 3400 RPM
Weight 8 lbs
140° F Maximum Temperature
Oil capacity 3.5 oz
Manifold: Aluminum prescision die cast special anticorrosion finish, brass and forged
Crankcase: Precision die cast, large coupling fins
Horizontal Axial Pump with gas flange
Bearings: Premium oversized ball and needle bearings
Valves, Seats, and Springs: Plastic poppet seat and cage, stainless steel spring
Seals: Buna N-2000 double seals
3/4" gas engine flange
Flange width: 4-1/4"
Total Depth: 7"
Front width: 6-1/4"
Height: 5-5/8"
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Axial Shafts Pump

Fits Model
AR PUMPS : RMV2.5G30D
BRIGGS AND STRATTON POWER PRODUCTS : 194106GS, 198347GS Pump

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $216.72
$162.54
You Save $54.18
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 6195
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VB3K
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $582.50
$436.88
You Save $145.62
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2928
 
Specs
Equipment Type Pressure Washer
PSI 1800
Gallons Per Minute 2.1
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 1750 RPM
Minimum Horsepower Requirements: 2.6 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-160
Flange Nema 56-C Flange
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forced Brass Manifold for Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Type Electric Flange Pump

Fits Model
AR PUMPS : XTA2G15EBA

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $587.50
$440.63
You Save $146.87
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2983
 
Specs
Equipment Type Pressure Washer
PSI 2200
Gallons Per Minute 3.0
Weight 18 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 4.5 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter.
Unloader: VRT3-160
Shaft Size Hollow 3/4" ID
Flange Gas Engine Flange
Type Gas Flange Pump

Fits Model
AR PUMPS : VRT3-160

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $605.72
$454.29
You Save $151.43
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4572
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 24 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 2.2 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter
Unloader: VRT3-160
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold For Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Electric Flange Pumps
Gallons Per Minute 2.1

Fits Model
AR PUMPS : XTV2G15EBA

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $604.50
$453.38
You Save $151.12
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5321
 
Specs
Equipment Type Pressure Washer
Gallons Per Minute 3.0
PSI 3000
Weight 19 lbs
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Gas Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirement: 9.3 hp for gas engines
Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter.
Unloader: VRT3-310EZ
Inlet 1/2" FPT
Outlet 3/8" FPT
Gallons Per Minute 5.5
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience
Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs.
Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating.
Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating
Continuously Lubricating Seals and V-Packing for Extended Life
High Strength Stainless Steel Plunger Rods
One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Shaft Size Hollow 1" ID
Flange Gas Engine Flange
Type

Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $550.36
$412.77
You Save $137.59
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 5753
 
Specs
Equipment Type Pressure Washer
PSI 1500
Weight 24 lbs
Unloader: VB3K
Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected.
Direct Drive with Electric Flange
Maximum Pump Speed: 3400 RPM
Minimum Horsepower Requirements: 2.2 bhp
Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter.
Inlet 1/2" FPT
Outlet 3/8" FPT
Oil Capacity 10oz
High Strength Forged Brass Manifold for Long Term Use
Eight 6mm Bolts
New Thicker Wall Ceramic Plungers to Help Prevent Thermal Shock
Forged Percision Ground Crankcase
Stainless Steel Valve Seat, O-Ring is Side Mounted
High Quality High Pressure Seal, New Low Pressure Seal With Built In Scraper
Two Piece Piston Guides
Shaft Size Hollow 5/8" ID
Gallons Per Minute 2.1
Type Electric Flange Pump

Fits Model
AR PUMPS : XTV2G15EBA

Replaces OEM
AR Pumps :

On Sale!

Reg. Price: $592.60
$444.45
You Save $148.15
(25% Off)
 
No Sales Tax, except in MD
Qty: