My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

MTM Hydro Electrical Part

MTM Hydro Electrical Part Parts

Do you need MTM Hydro Electrical Parts for your Pressure Washer? Jack's is the place to look! Get all the pressure washer Electrical Parts you need to keep your pressure washer running properly. Check out our selection of MTM Hydro Electrical parts below!

Featured: 2 Items Sort by  Result's per page
 
15 Amp 3/8" Pressure Switch 6248
Barens OEM PartMore Info

15 Amp 3/8" Pressure Switch

Part Number: 6248
 
Specs
Temperature 195°F
The pressure switch responds to a rise or fall in system pressure by either breaking or completing an electrical circuit. The switch can be used several ways in the pressure washer system. It can be used as a fluid control device in conjuction with the trigger gun. When the gun valve closes, the increase in pressure throws the pressure switch and shuts off all power to the system. When the gun valve re-opens, pressure in the line is relieved , the switch closes, and power is restored to the system. When used as a boiler control, the switch is activated to complete a circuit to supply power to the burner assembly. When system pressure increases, the switch is activated to complete the circuit to the burner. When pressure falls the switch plunger returns to its normal position.
Activates at 360 PSI
3 wires (blue= common, red=N/C, brown=N/O)
PSI 4100 PSI maximum
Equipment Type Pressure Washer
Material Stainless Steel Plunger

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$30.29
 
No Sales Tax, except in MD
Qty:
15 Amp 1/4" Pressure Switch 6249
Barens OEM PartMore Info

15 Amp 1/4" Pressure Switch

Part Number: 6249
 
Specs
Equipment Type Pressure Washer
The pressure switch responds to a rise or fall in system pressure by either breaking or completing an electrical circuit. The switch can be used several ways in the pressure washer system. It can be used as a fluid control device in conjuction with the trigger gun. When the gun valve closes, the increase in pressure throws the pressure switch and shuts off all power to the system. When the gun valve re-opens, pressure in the line is relieved , the switch closes, and power is restored to the system. When used as a boiler control, the switch is activated to complete a circuit to supply power to the burner assembly. When system pressure increases, the switch is activated to complete the circuit to the burner. When pressure falls the switch plunger returns to its normal position.
Activates at 360 PSI
PSI 4100 PSI maximum
3 wires (blue= common, red=N/C, brown=N/O)
Temperature 195°F
Material Stainless Steel Plunger

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$30.29
 
No Sales Tax, except in MD
Qty: