Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

MTM Hydro Pressure Washer Injector

MTM Hydro Pressure Washer Injector Parts

MTM Hydro Pressure Washer Injector: Jacks is your Place! We have the Pressure Washer Injector you need, with fast shipping and great prices! For lawn mower parts and accessories, think Jacks!

Featured: 6 Items Sort by  Result's per page
 

Barens OEM Part

High Draw Adjustable 1.8mm Chemical Injector

Part Number: 6634
 
Specs
Equipment Type Pressure Washer
Orifice 1.8mm
Gallons Per Minute 2-3
PSI 3600
Temperature 300°F
Inlet 3/8" MPT
Outlet 3/8" MPT
20% High Draw/Mix Ratio
Downstream Injectors are installed on the Discharge Side of the Pump to Introduce Chemical Into the Cleaning Program. Using a Chemical Nozzle the Pressure of the Machine is Dropped Below 1000 PSI to Draw Chemical

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$13.30
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

High Draw Adjustable 2.3mm Chemical Injector

Part Number: 6636
 
Specs
Equipment Type Pressure Washer
Orifice 2.3mm
Gallons Per Minute 5-8
PSI 3600
Temperature 300°F
Inlet 3/8" MPT
Outlet 3/8" MPT
20% High Draw/Mix Ratio Downstream Injectors are installed on the Discharge Side of the Pump to Introduce Chemical Into the Cleaning Program. Using a Chemical Nozzle the Pressure of the Machine is Dropped Below 1000 PSI to Draw Chemical

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$13.30
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

High Draw Fixed 1.8mm Chemical Injector

Part Number: 6631
 
Specs
Equipment Type Pressure Washer
PSI 3600
Temperature 300°F
Inlet 3/8" MPT
Outlet 3/8" MPT
20% Mix Ratio
Orifice 1.8mm
Gallons Per Minute 2-3
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. The injection rate for this injector is set at the factory and not adjustable. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less.

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$12.56
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

High Draw Fixed 2.1mm Chemical Injector

Part Number: 6632
 
Specs
Equipment Type Pressure Washer
PSI 3600
Temperature 300°F
Inlet 3/8"MPT
Outlet 3/8"MPT
20% Mix Ratio
Gallons Per Minute 3-5
Orifice 2.1
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. The injection rate for this injector is set at the factory and not adjustable. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less.

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$12.56
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

High Draw Fixed 2.3mm Chemical Injector

Part Number: 6633
 
Specs
Equipment Type Pressure Washer
PSI 3600
Temperature 300°F
Inlet 3/8" MPT
Outlet 3/8" MPT
Orifice 2.3mm
20% Mix Ratio
Gallons Per Minute 5-8
Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. The injection rate for this injector is set at the factory and not adjustable. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode.
Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less.

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$12.56
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

High Draw Adjustable 2.1mm Chemical Injector

Part Number: 6635
 
Specs
Equipment Type Pressure Washer
Orifice 2.1mm
Gallons Per Minute 3-5
PSI 3600
Temperature 300°F
Inlet 3/8" MPT
Outlet 3/8" MPT
20% High Draw/Mix Ratio Downstream Injectors are installed on the Discharge Side of the Pump to Introduce Chemical Into the Cleaning Program. Using a Chemical Nozzle the Pressure of the Machine is Dropped Below 1000 PSI to Draw Chemical

Fits Model

Replaces OEM
MTM Hydro :

Your Price:
$13.30
 
No Sales Tax, except in MD
Qty: