Over 1,000,000 Orders Shipped Since 1997!

2.5" HG X 1/4" FPT Vacuum Switch 1405

2.5" HG X 1/4" FPT Vacuum Switch

Part#: 1405

There are no reviews at this time.

Barens OEM Part


No Sales Tax!



2.5" HG X 1/4" FPT Vacuum Switch

Fits Model


Replaces OEM



Temperature 140°F
Inlet 1/4" FPT
Vacuum switches are installed on the inlet line to the pump. They are composed of two parts, the diaphragm, which responds to changes in system pressure, expanding toward its system side when pressure in the system falls below outside or atmospheric pressure, and the electrical switch which is held open by spring tension when there is no pressure differential and the diaphragm is in its normal position.
When the pump draws water into the system, the suction causes pressure on the inlet side of the pump to decrease, the diaphragm falls and the vacuum switch contacts close, completing the circuit to the burner system. When flow ceases, the diaphragm rises and a spring helps return the switch to the open position. With the switch open, the circuit to the burner system is broken, the solenoid valve closes, and fuel flow to the burner ceases, stopping burner firing.
NOTE: A potential problem with a vac switch can be created when the inlet filter or float tank becomes clogged. The pump will continue to run, creating a pressure drop on the inlet. When this happens, the vac switch will continue to close and start the burner.
Should be used on pressure washers 3 GPM to 4.5 GPM
Equivalent to 0007 vac switch
Gallons Per Minute 3 to 4.5
Weight 1.2 lbs
Equipment Type Pressure Washer

Reviews for the 2.5" HG X 1/4" FPT Vacuum Switch

There are no reviews for this product at the time.
Need Help Finding Your Part?
Parts Lookup
Commercial Savings
Featured Offers

Lawn Mower Parts!

Featured Offer
Large selection of Lawn Mower Parts for all the major Manufacturers!

Lawn Mower Parts

Popular DIY Info!


Tons of videos and information on regular maintenance for Outdoor Power Equipment