My Account | My Garage | Commercial/Dealer Login | Order Status |
Contact Customer Support
M-F: 9am-6pm ET
Sat: 9am-5pm ET
Sun: 11am-5pm ET
| 1-877-737-2787
Shopping Cart

Over 1,000,000 Orders Shipped Since 1997!

Motors Made Ready

Universal - Engines Motors and Pulleys - Motors Made Ready

Motors Made Ready: These Motors are built to be ready to install and operate. Motors Made Ready come pre-wired with switch and ground faults, ball bearing design, copper windings and more. These motors can be used for pressure washers, portable and self-contained systems and more. Check out Jack's selection of Motors Made Ready below.

Featured: 8 Items Sort by  Result's per page
 
Baldor 5/8" 2.0 HP C-Face Motor Made Ready With Switch and Ground Fault 2654
Barens OEM PartMore Info

Baldor 5/8" 2.0 HP C-Face Motor Made Ready With Switch and Ground Fault

Part Number: 2654
 
Specs
Equipment Type Pressure Washer
Shaft Size 5/8"
Volt 115/230
Weight 48 lbs
Rigid base with C-Face Open Drip Proof
Frame: 56C
Horsepower: 2.0
RPM: 1725
Full load amps: 18/9
Motors Pre-Wired with Switch and Ground Fault
Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Portable and self contained stationary system for direct drive mount and coupled mount designs
Equipment Type Steam Cleaners
Specification number: 35K267Y690
Hertz: 60
Service factor: 1.15
Full load efficiency: 78.5
Power factor: 89

Fits Model

Replaces OEM
Universal :

Your Price:
$710.94
 
No Sales Tax, except in MD
Qty:
Baldor 5/8" 1.5 HP C-Face Motor Made Ready With Switch and Ground Fault 3173
Barens OEM PartMore Info

Baldor 5/8" 1.5 HP C-Face Motor Made Ready With Switch and Ground Fault

Part Number: 3173
 
Specs
Equipment Type Pressure Washer
Shaft Size 5/8"
Volt 115/230
Weight 38 lbs
Rigid base with C-Face Open Drip Proof
Frame: 56C
Horsepower: 1.5
RPM: 3450
Full load amps: 13/7
Motors Pre-Wired with Switch and Ground Fault
Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Portable and self contained stationary system for direct drive mount and coupled mount designs
Service factor: 1.15
Full load efficiency: 75.5
Power factor: 98

Fits Model

Replaces OEM
Universal :

Your Price:
$592.71
 
No Sales Tax, except in MD
Qty:
Baldor 5/8" 2.0 HP C-Face Motor Made Ready With Switch and Ground Fault 2474
Barens OEM PartMore Info

Baldor 5/8" 2.0 HP C-Face Motor Made Ready With Switch and Ground Fault

Part Number: 2474
 
Specs
Equipment Type Pressure Washer
Shaft Size 5/8"
Volt 115/230
Weight 45 lbs
Rigid base with C-Face Open Drip Proof
Frame: 56C
Horsepower: 2.0
RPM: 3450
Full load amps: 17/8.8
Motors Pre-Wired with Switch and Ground Fault
Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Equipment Type Steam Cleaners
Portable and self contained stationary system for direct drive mount and coupled mount designs
Specification number: 35T967Y685
Rigid Base with C-Face Open Drip Proof
Hertz: 60
Service factor: 1.15
Full load efficiency: 77
Power factor: 95

Fits Model

Replaces OEM
Universal :

Your Price:
$634.24
 
No Sales Tax, except in MD
Qty:
Baldor 5/8" 1.5 HP C-Face Motor Made Ready With Switch and Ground Fault 3120
Barens OEM PartMore Info

Baldor 5/8" 1.5 HP C-Face Motor Made Ready With Switch and Ground Fault

Part Number: 3120
 
Specs
Equipment Type Pressure Washer
Shaft Size 5/8"
Volt 115/230
Weight 46 lbs
Rigid base with C-Face Open Drip Proof
Frame: 56C
Horsepower: 1.5
RPM: 1725
Full load amps: 14/7
Motors Pre-Wired with Switch and Ground Fault
Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Equipment Type Steam Cleaners
Portable and self contained stationary system for direct drive mount and coupled mount designs
Service factor: 1.15
Full load efficiency: 74
Power factor: 94

Fits Model

Replaces OEM
Universal :

Your Price:
$623.58
 
No Sales Tax, except in MD
Qty:
Baldor 3/4" 5.0 HP C-Face Motor Made Ready 3332
Barens OEM PartMore Info

Baldor 3/4" 5.0 HP C-Face Motor Made Ready

Part Number: 3332
 
Specs
Equipment Type Pressure Washer
Equipment Type Steam Cleaners
Shaft Size 3/4"
Frame: 56C
Horsepower: 5
RPM: 3450
Volt 230
Full Load Amps: 23
Weight 58 lbs

Fits Model

Replaces OEM
Universal :

Your Price:
$804.46
 
No Sales Tax, except in MD
Qty:
Baldor 5/8" 1.5 HP Motor Made Readt With Switch and Ground Fault 3201
Barens OEM PartMore Info

Baldor 5/8" 1.5 HP Motor Made Readt With Switch and Ground Fault

Part Number: 3201
 
Specs
Equipment Type Pressure Washer
Shaft Size 5/8"
Volt 115/230
Weight 53 lbs
Equipment Type Steam Cleaners
Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Specification number: 35K358Y860
Rigid Base with C-Face
Totally Enclosed, Fan Cooled (TEFC)
Horsepower: 1.5
Voltage: 115/230
Full load amps: 14/6
RPM: 1725
Service factor: 1.15
Full load efficiency: 82.5
Power factor: 98
Portable and self contained stationary system for direct drive mount and coupled mount designs
Specification number: 35K358Y860
Frame: 56C

Fits Model

Replaces OEM
Universal :

Your Price:
$634.62
 
No Sales Tax, except in MD
Qty:
Baldor 5/8" 2.0 HP C-Face Motor Made Ready With Switch and Cord 3584
Barens OEM PartMore Info

Baldor 5/8" 2.0 HP C-Face Motor Made Ready With Switch and Cord

Part Number: 3584
 
Specs
Equipment Type Pressure Washer
Equipment Type Steam Cleaners
Ball bearing design
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Portable and self contained stationary system for direct drive mount and coupled mount designs
Specification number: 35T973Y691
Totally Enclosed Fan Cooled
Shaft Size 5/8"
Frame: 56C
Horsepower: 2
Volt 115/230
Hertz: 60
Phase: 1
Full Load Amps: 17.6/8.8
RPM: 3450
Service factor: 1.15
Full load efficiency: 77
Power factor: 95

Fits Model

Replaces OEM
Universal :

Your Price:
$591.64
 
No Sales Tax, except in MD
Qty:
Baldor 5/8" 1.5 HP C-Face Motor Made Ready With Switch and Cord 5270
Barens OEM PartMore Info

Baldor 5/8" 1.5 HP C-Face Motor Made Ready With Switch and Cord

Part Number: 5270
 
Specs
Equipment Type Pressure Washer
1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts
Manual thermal overload located in the conduit box
UL and CSA recognized component approval
200 C copper windings
Equipment Type Steam Cleaners
Portable and self contained stationary system for direct drive mount and coupled mount designs
Specification number: 35T982Y862
Rigid Base with C-Face
Totally Enclosed, Fan Cooled (TEFC)
Shaft Size 5/8"
Frame: 56C
Horsepower: 1.5
Volt 115/230
Full load amps: 13.2/6.6
RPM: 3450
Service factor: 1.15
Full load efficiency: 75.5
Power factor: 98
Weight 38 lbs

Fits Model

Replaces OEM
Universal :

Your Price:
$532.67
 
No Sales Tax, except in MD
Qty: