Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Rotating Nozzle

Universal - Pressure Washer Nozzles - Rotating Nozzle

You can remove the toughest dirt with a Rotating Nozzle. These are used for high powered water blasting and can cut your cleaning time in half. Rotating nozzles are used for rust removal, tank cleaning, paint and graffiti removal, brick cleaning and much more.

Featured: 40 Items Sort by  Result's per page
 

Barens OEM Part

5.0 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4802
 
Specs
Equipment Type Pressure Washer
Inlet 1/4"
Nozzle Size 5.0
It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application.
Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
PSI 3700
Temperature 212° F

Fits Model

Replaces OEM
Universal :

Your Price:
$65.61
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Rotomax #3 Black Rotating Nozzle

Part Number: 1415
 
Specs
Color Black
PSI 1450-3500
Gallons Per Minute 4.2-5.5
Inlet 1/4"FPT
Weight .6lb
Designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero degree nozzle. The unique internal design allows aim and shoot operation even when cleaning overhead, and permits easy replacement of all wear parts. Sized according to flow rate, rotomax is perfect for your toughest cleaning tasks.
Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment.
Do not tighten the Rotomax by the plastic cover. Use a wrench on the hex portion of the inlet nipple (#10 on the parts break down). This will avoid stripping the holding screw on the plastic cover. Also, tightening the hex too much will prevent the rotor from spinning. Always use with a high pressure inlet filter.
All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Temperature 200° F

Fits Model

Replaces OEM
Universal :

Your Price:
$76.34
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

4.5 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4801
 
Specs
Equipment Type Pressure Washer
Inlet 1/4"
It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application.
Nozzle Size 4.5
Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
PSI 3700
Temperature 212° F

Fits Model

Replaces OEM
Universal :

Your Price:
$65.61
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

5.5 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4803
 
Specs
Equipment Type Pressure Washer
Inlet 1/4"
Nozzle Size 5.5
It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application.
Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Temperature 212° F
PSI 3700

Fits Model

Replaces OEM
Universal :

Your Price:
$65.61
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

6.0 Roto-Jet 5800 PSI Rotating Nozzle

Part Number: 4816
 
Specs
Equipment Type Pressure Washer
Inlet 1/4"
Nozzle Size 6.0
It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increases cleaning ability with the impact of a 0 degree flat nozzle with a 25 degree pattern. Roto-Jet produces up to 5000 PSI of cleaning power to handle almost any high pressure spraying application. Can be used on the following: Rust removal, tank cleaning, paint and graffiti removal, mildew removal, kennel cleaning, hog house cleaning, grease removal, brick cleaning and restoration, etc.
Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
PSI 5800
Temperature 200° F

Fits Model

Replaces OEM
Universal :

On Sale!

Reg. Price: $150.74
$113.06
You Save $37.68
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

5.5 DK Black Dirt Killer Rotating Nozzle

Part Number: 1032
 
Specs
Inlet 1/4"
Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning
Color Black
Nozzle Size 5.5
Note: Must be started with nozzle pointed to ground
Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Temperature 180° F
PSI 3200

Fits Model

Replaces OEM
Universal :

Your Price:
$105.55
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

4.5 DK Yellow Dirt Killer Rotating Nozzle

Part Number: 1034
 
Specs
Inlet 1/4"
Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning
Color Yellow
Nozzle Size 4.5
Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Note: Must be started with nozzle pointed to ground
Temperature 180° F
PSI 3200

Fits Model

Replaces OEM
Universal :

Your Price:
$105.55
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

5.5 IDK Black Dirt Killer Rotating Nozzle

Part Number: 1039
 
Specs
Color Black
Inlet 1/4" FPT
Nozzle Size 5.5
Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle. Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool.
By using properly, the Dirt Killer will perform as follows: at 3000 PSI aproximately 250 to 400 hours: at 2000 PSI approximately 300 to 500 hours: at 1000 PSI approximatley 400 to 700 hours before rebuilding or replacing.
SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND.
PSI 4700
Temperature 200° F

Fits Model

Replaces OEM
Universal :

On Sale!

Reg. Price: $193.10
$144.83
You Save $48.27
(25% Off)
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

Rotomax #2 Blue Rotating Nozzle

Part Number: 1414
 
Specs
Color Blue
PSI 1450-3500
Gallons Per Minute 2.9-4.2
Inlet 1/4"FPT
Weight .6lb
Designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero degree nozzle. The unique internal design allows aim and shoot operation even when cleaning overhead, and permits easy replacement of all wear parts. Sized according to flow rate, rotomax is perfect for your toughest cleaning tasks.
Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment.
All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Do not tighten the Rotomax by the plastic cover. Use a wrench on the hex portion of the inlet nipple (#10 on the parts break down). This will avoid stripping the holding screw on the plastic cover. Also, tightening the hex too much will prevent the rotor from spinning. Always use with a high pressure inlet filter.
Temperature 200° F

Fits Model

Replaces OEM
Universal :

Your Price:
$76.34
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

4.0 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4800
 
Specs
Equipment Type Pressure Washer
Inlet 1/4"
It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application.
Nozzle Size 4.0
Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
PSI 3700
Temperature 212° F

Fits Model

Replaces OEM
Universal :

Your Price:
$65.61
 
No Sales Tax, except in MD
Qty: