Tachometer

Tachometer

A hand held precision instrument
Accurately determines RPM on 2-cycle and 4-cycle , single cylinder engines
No direct connection required

Just hold built in antenna near spark plug
Selector switch gives 0-5000 RPM low scale or 0-15000 RPM high scale
Solid state electronics

Battery NOT included

Meter displays rpm while engine is running. When engine is stopped, meter displays elapsed time. The maximum speed is 20,000 rpm and it updates 1-2 times per second.

Part number 795163 is a pulse operated, hand held tachometer designed more as a diagnostic tool than other Tiny-Tachs. This tach is set up as a wireless device but comes equipped with a plug in wired antenna for those occasions where a stable rpm reading is hard to get. It features an auto off feature to extend battery life. Accuracy is +/- 10 rpm and the display is updated every 1/2 second. Besides the standard rpm display, the tach can be programmed to display MAX rpm reached during each session. This is a nice, handheld wireless tachometer!

For all single cylinder and most twin cylinder 4-cycle gasoline engines
Alerts you to lube and change oil

For commercial equipment
Voltage range 8-32 VDC
DC input

When attached to ignition module, permits use of Digital Tachometer, 19389 on Vanguard™ 3-cylinder liquid-cooled gasoline engines.

Use with 19457 Digital Tachometer & Hour meter. Quick clamp design with spring loaded post terminal for easy installation and removal.

Part number 795193 is a new commercial Tiny-Tach that has the same 20K rpm limit and refresh rate as the improved version mentioned previously. According to Tiny-Tach ... "Commercial Gas Model can be used as a complete Service Tracking device for any spark ignited engine. It is programmable for different firing orders as well as for tracking two different service intervals."

This tachometer uses the trigger module from the 3/LC gas engine as a sensor to monitor crankshaft motion. Most diesel engines sold since 2007 are equipped with this sensor. If not, it will have to be added. Order 825009 for the trigger module and 820013 for a attachment screw. The tachometer is powered by the pulses from the trigger module so it does not require an external battery. Besides a tachometer function, this unit also has 2 service countdown circuits, a max rpm circuit and a timer function that can be used to time specific jobs.