Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Clear Bowl

Universal - Filters and Strainers - Clear Bowl

Clear Bowl: Filter contaminated water with the Clear Bowl water filter. These water filters clean the water before it reaches the pump in your pressure washer to reduce the risk of damage due to natural contaminates found in water. Check out the selection Jack's has below!

Featured: 10 Items Sort by  Result's per page
 

Barens OEM Part

3/4" FPT 80 Mesh Clear Bowl Water Filter

Part Number: 4422
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Outlet 3/4" FPT
Inlet 3/4" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$29.60
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1/2" FPT 50 Mesh Clear Bowl Water Filter

Part Number: 4450
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1/2" FPT
Outlet 1/2" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
50 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$26.49
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1/2" FPT 80 Mesh Clear Bowl Water Filter

Part Number: 4421
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1/2" FPT
Outlet 1/2" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$29.36
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1" FPT 80 Mesh Clear Bowl Water Filter

Part Number: 4423
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1" FPT
Outlet 1" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$50.52
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

3/4" FPT 50 Mesh Clear Bowl Water Filter

Part Number: 4451
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 3/4" FPT
Outlet 3/4" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
50 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$26.71
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1 1/2" FPT 50 Mesh Clear Bowl Water Filter

Part Number: 4477
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1 1/2" FPT
Outlet 1 1/2" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
50 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$54.85
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1 1/2" FPT 80 Mesh Clear Bowl Water Filter

Part Number: 4478
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1 1/2" FPT
Outlet 1 1/2" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$59.19
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1" FPT 50 Mesh Clear Bowl Water Filter

Part Number: 4455
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1" FPT
Outlet 1" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
50 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$45.49
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1 1/4" FPT 50 Mesh Clear Bowl Water Filter

Part Number: 4475
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1 1/4" FPT
Outlet 1 1/4" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
50 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$50.52
 
No Sales Tax, except in MD
Qty:

Barens OEM Part

1 1/4" FPT 80 Mesh Clear Bowl Water Filter

Part Number: 4476
 
Specs
Equipment Type Pressure Washer
Temperature 140° F Max
Inlet 1 1/4" FPT
Outlet 1 1/4" FPT
PSI 150 PSI Maximum @ 70° F
PSI 100 PSI Maximum @ 125° F
80 Mesh Screen
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump

Fits Model

Replaces OEM
Universal :

Your Price:
$55.10
 
No Sales Tax, except in MD
Qty: