Quick Connect Chemical Injector

Equipment Type Pressure Washer
Orifice 1.8mm
Material Brass
Inlet 1/4"
Streamline Your Combination Injector/Quick Connect Assembly. Built-in 3/8" Socket and 3/8" Plug Save You Money On Labor For Assembly. 10% Draw
Gallons Per Minute 2.0-3.0
PSI 3000
Temperature 190° F

Equipment Type Pressure Washer
Gallons Per Minute 2.1-2.9
Inlet 3/8" Plug
Outlet 3/8" Quick Change Socket
Robokim injector kit comes complete with a 3/8" plug on the inlet, and a 3/8" quick change socket on the outlet. In addition, 6 feet of clear plastic tubing and a chemical strainer are included. A downstram injector for low pressure chemical applications. Features an adjustable metering knob. Use in conjunction with a double lance, adjustable nozzle, or other means of changing to low pressure while retaining system's output flow.
Refer to the arrow on the injector body for porper flow direction. Install the injector in the system downstream of the regulator unloader which is downstream of the pump. These injectors will draw your chemical into the water stream at 125PSI and 2.1 to 10.8 GPM, through your low pressure nozzle. Injector WILL NOT draw chemical above 250 PSI through your high pressure nozzle. The amount of chemical drawn in is controlled with the adjustment knob. Maximum pressure: 3200 PSI. Maximum temperature: 210 degrees F. Inlet port: 3/8" MPT. Outlet port: 3/8" MPT. Dimensions: 1.0" x 2.7" x3.1". Weight: .6 lb. Repair Kit: (chemical) Barens order #1270. (acid) Barens #3846.
4 feet clear vinyl tubing
Strainer with check valve

Equipment Type Pressure Washer
Gallons Per Minute 2.9-4.0
Inlet 3/8" Plug
Outlet 3/8" Quick Change Socket
Robokim injector kit comes complete with a 3/8" plug on the inlet, and a 3/8" quick change socket on the outlet. In addition, 6 feet of clear plastic tubing and a chemical strainer are included. A downstram injector for low pressure chemical applications. Features an adjustable metering knob. Use in conjunction with a double lance, adjustable nozzle, or other means of changing to low pressure while retaining system's output flow.
Refer to the arrow on the injector body for porper flow direction. Install the injector in the system downstream of the regulator unloader which is downstream of the pump. These injectors will draw your chemical into the water stream at 125PSI and 2.1 to 10.8 GPM, through your low pressure nozzle. Injector WILL NOT draw chemical above 250 PSI through your high pressure nozzle. The amount of chemical drawn in is controlled with the adjustment knob. Maximum pressure: 3200 PSI. Maximum temperature: 210 degrees F. Inlet port: 3/8" MPT. Outlet port: 3/8" MPT. Dimensions: 1.0" x 2.7" x3.1". Weight: .6 lb. Repair Kit: (chemical) Barens order #1270. (acid) Barens #3846.
4 feet clear vinyl tubing
Strainer with check valve

Equipment Type Pressure Washer
Gallons Per Minute 4.0-5.6
Inlet 3/8" Plug
Outlet 3/8" Quick Change Socket
Robokim injector kit comes complete with a 3/8" plug on the inlet, and a 3/8" quick change socket on the outlet. In addition, 6 feet of clear plastic tubing and a chemical strainer are included. A downstram injector for low pressure chemical applications. Features an adjustable metering knob. Use in conjunction with a double lance, adjustable nozzle, or other means of changing to low pressure while retaining system's output flow.
Refer to the arrow on the injector body for porper flow direction. Install the injector in the system downstream of the regulator unloader which is downstream of the pump. These injectors will draw your chemical into the water stream at 125PSI and 2.1 to 10.8 GPM, through your low pressure nozzle. Injector WILL NOT draw chemical above 250 PSI through your high pressure nozzle. The amount of chemical drawn in is controlled with the adjustment knob. Maximum pressure: 3200 PSI. Maximum temperature: 210 degrees F. Inlet port: 3/8" MPT. Outlet port: 3/8" MPT. Dimensions: 1.0" x 2.7" x3.1". Weight: .6 lb. Repair Kit: (chemical) Barens order #1270. (acid) Barens #3846.
4 feet clear vinyl tubing
Strainer with check valve

Equipment Type Pressure Washer
Gallons Per Minute 5.6-10.8
Inlet 3/8" Plug
Outlet 3/8" Quick Change Socket
Robokim injector kit comes complete with a 3/8" plug on the inlet, and a 3/8" quick change socket on the outlet. In addition, 6 feet of clear plastic tubing and a chemical strainer are included. A downstram injector for low pressure chemical applications. Features an adjustable metering knob. Use in conjunction with a double lance, adjustable nozzle, or other means of changing to low pressure while retaining system's output flow.
Refer to the arrow on the injector body for porper flow direction. Install the injector in the system downstream of the regulator unloader which is downstream of the pump. These injectors will draw your chemical into the water stream at 125PSI and 2.1 to 10.8 GPM, through your low pressure nozzle. Injector WILL NOT draw chemical above 250 PSI through your high pressure nozzle. The amount of chemical drawn in is controlled with the adjustment knob. Maximum pressure: 3200 PSI. Maximum temperature: 210 degrees F. Inlet port: 3/8" MPT. Outlet port: 3/8" MPT. Dimensions: 1.0" x 2.7" x3.1". Weight: .6 lb. Repair Kit: (chemical) Barens order #1270. (acid) Barens #3846.
4 feet clear vinyl tubing
Strainer with check valve

Equipment Type Pressure Washer
Orifice 2.1mm
Material Brass
Inlet 1/4"
Streamline Your Combination Injector/Quick Connect Assembly. Built-in 3/8" Socket and 3/8" Plug Save You Money On Labor For Assembly. 10% Draw
Gallons Per Minute 3.0-5.0
Temperature 190° F
PSI 3000

Equipment Type Pressure Washer
Orifice 2.3mm
Material Brass
Inlet 1/4"
Streamline Your Combination Injector/Quick Connect Assembly. Built-in 3/8" Socket and 3/8" Plug Save You Money On Labor For Assembly. 10% Draw
Gallons Per Minute 5.0-8.0
PSI 3000
Temperature 190° F

Equipment Type Pressure Washer