Sand Blast Kit

This upgraded industrial sand blast kit includes everything you will need to attach it to your pressure washer gun. The kit includes 3 spray nozzles so you can use the kit with various sizes of pressure washers. An 18" wand pipe and side handle feature helps relieve fatigue by giving the operator a more comfortable hold while sand blasting for long periods of time. Keep mixing head pointed down to prevent water from returning to sand container.
Equipment Type Pressure Washer
Includes 1 Piece Tungsten Carbide Nozzle, 18" Wand Pipe with Side Handle, Cast Aluminum Mixing Body With Gasket, Sand Probe, 20' of 3/4" Spiroflex Hose, Hose Clamps, 3 Spray Nozzles Zero Degree Sizes 4.0, 4.5, 5.5, 22mm Socket and Nozzle to Mount Solidly to the Outlet of the Spray Gun. (Gun Not Included) Installation, Instruction, and Parts Break Down Manual, Working flow of 4 GPM @ 3000 PSI to 8 GPM @ 5000 PSI. Use 5 degree nozzles only (sold separately).

Heavy duty industrial grade sand blast kit. Will remove coatings from almost any surface, such as metal, heavy graffiti accumulations, and paint preparation. Working flow of 4 GPM @ 3000 PSI to 8 GPM @ 5000 PSI. Use 5 degree nozzles only (sold separately).
Material Tungsten Carbide
Equipment Type Pressure Washer

Material Stainless Steel
Equipment Type Pressure Washer
Nozzle Size 7.0

Equipment Type Pressure Washer

Gallons Per Minute 8
PSI 3650
Includes Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results.
Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Material Brass
Nozzle Size 3.5
Temperature 190° F
Equipment Type Pressure Washer

Gallons Per Minute 8
Includes Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
PSI 3650
Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results. Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Material Brass
Nozzle Size 4.5
Temperature 190° F
Equipment Type Pressure Washer

Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results. Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Gallons Per Minute 8
Includes Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
PSI 3650
Material Brass
Nozzle Size 5.5
Equipment Type Pressure Washer
Temperature 190° F

Gallons Per Minute 8
Includes Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Material Brass
PSI 3650
Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results. Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow.
Nozzle Size 6.0
Equipment Type Pressure Washer
Temperature 190° F

Equipment Type Pressure Washer
Material Brass

Equipment Type Pressure Washer
Material Brass