Search

Number #1 For Lawn Mower Parts!
Over 1.2 Million Parts Available!

Hot Commercial Discounts!
If you own a business, Click Here and Save

Picture shown may not be actual burner.

WAYNE BURNER ASSEMBLY

Delivers fuel in properly atomized form, proper amount of air with fuel, and provides for ignition of the mixture of atomized fuel oil and air in order to start the pressure washer heating system.
Asembly Includes:

fuel pump
fuel nozzle
fuel storage and handling system, including a fuel tank, lines, and filter
a blower
transformer
electrodes for ignition
power source to drive the pump and blower
an electrical power supply
a solenoid valve to control fuel flow
Fuel Nozzle and solenoid NOT included.
Fuel pump: Suntec A2VA-7116. (Barens Order #1437)
Burner Motor:
Transformer:

FUEL GUN ASSEMBLY FOR EHASR

An electrode assembly is composed of three parts, the electrode, the insulator and the palnut. The electrode is a metal rod that is threaded on one end and bent or curved on the other end. Two of these rods are paired and curved toward each other so that electrical arcing will occur at and only between the tips of the rods.
Each electrode rod is inserted through a ceramic insulator. The insulator prevents arcing between the back portions of the rod and other metal components.
A special nut called a palnut is screwed into the electrode rod, preventing the insulator from sliding off.
Part# 4136

Our Price: $118.56
Qty:

Picture shown may not be actual burner. WAYNE 12 VOLT BURNER
A specially designed burner for No. 1 or No. 2 fuel oil which allows the burner to operate from a gasoline driven engine through the alternator and a heavy duty battery WITHOUT the need for a generator.
This burner features:

Specifically designed 12 volt solid state ignitor, runs constant duty to reignite oil in case of flame loss
12v DC, permanent magnet, ball bearing motor with replaceable brushes
firing rate from 1.00 GPH to 2.75 GPH
Industry standard MSR components with the exception of motor and ignitor
Fuel solenoid included
SPECIFICATIONS:

Fuels: No. 1 or No. 2 heating oil (ASTM D-396) only
Firing Capacities: 1.00 to 2.75 gallons per hour
Input: 140,000 to 385,000 BTU/hour
Fuel Unit: Suntec A-single stage or B-two stage
Mounting: Adjustable flange or base mount
Power Supply: 12VDC
Motor: .22 hp 4500 RPM
Ignition: 20,000v/28ma Secondary, Intermittent duty electronic ignitor
Height: 10 3/4"
Width: 14 1/16"
Depth: 6 7/8"

WAYNE 12 VOLT BURNER

PRODUCT BUY HERE

MSR-DC
Part# 4137

List Price:$779.80
You save 25% !!!
Your Price: $584.85
Qty:

Picture shown may not be actual burner. WAYNE EHASR BURNER ASSEMBLY

Lower Emissions

Improved efficiencies

Pulsation free

Positive retention

Controlled flame pattern

Quiet stops and starts

Low nozzle temperatures

Underwriters Laboratories (UL) Listed

Firing capacity: 0.75 to 3.00 BPH

Fuel pump: 3450 RPM fuel pump one or 2 stage

Motor: 3450 rpm

Ignition: 10,000v/23 MA secondary

Fuel nozzle & Solenoid not included

WAYNE EHASR BURNER ASSEMBLY

PRODUCT VOLTS FAN BUY HERE

239-001 EHASR 115 6-1/4"
Part# 3603

List Price:$581.06
You save 25% !!!
Your Price: $435.80
Qty:

239-005 EHASR 230 6-1/4"
Part# 3604

List Price:$609.46
You save 25% !!!
Your Price: $457.10
Qty:

Number #1 For Lawn Mower Parts! Over 1.2 Million Parts Available!

Number #1 For Lawn Mower Parts!
Over 1.2 Million Parts Available!