Lawn Mower Parts

Over 1.4 Million Parts Available!

Hot Commercial Discounts!
If you own a business, Click Here and Save

FLOW ACTUATED SWITCHES

Advantages of Flow Switches:

Mounts further downstream in pumping system than traditional vacuum switches, therby minimizing potential leak points that can cause vacuum switches to close.
Vacuum switches use rubber diaphragms that often rupture and cause vacuum leaks to the pump
Flow switches operate at a variety of pressures
Flow switches eliminate the need to restrict water flow to the pump, thereby prolonging pump life
the reed switch is encased in a protective glass capsule with a sealed nitrogen atmosphere that eliminates exposure to corrosive cleaning chemicals

FLOW ACTUATED SWITCHES
	SIZE	BUY HERE
	ST - 5 3/8" FPT mount vertically	Part# 1565 Our Price: $44.21 Qty:
	ST - 6 3/8" FPT mount any direction	Part# 1249 Our Price: $47.58 Qty:
	200005455 Reed switch ST5 (Yellow)	Original Part #1564 has been superceded to: Part# 6944 Our Price: $24.05 Qty:
	200006550 Reed switch ST6 (Red)	Part# 6067 Our Price: $23.09 Qty:
	"TMT" FLOW SWITCH Tri-magnet technology in-line flow switch. Features: Microswitch technology eliminates reed switch High pressure in-line flow switch Activates with as little as .5gpm flow Can be mounted in any position Specifications: 5000 PSI operating pressure 12 GPM Maximum 180°F maximum temperature 48", 18 awg lead length 3/8" FPT inlet 3/8" FPT discharge GP Number - 100934 Part# 5393 Our Price: $57.15 Qty:
	"TMT" FLOW SWITCH - WITH PILOT FEATURE 1/2 GPM minimum flow required 180° F maximum operting temp. Lead length: 48" 18awg Electrical service life: 200,000 operations Inlet/Outlet: 3/8" FPT Pilot: 1/4" hose barb 12 GPM, 4000PSI GP Number - 100879 Part# 5193 Our Price: $141.00 Qty: 16 GPM, 5000PSI GP Number - 100329 Part# 3022 List Price:$222.34 You save 25% !!! Your Price: $166.76 Qty:
	SURE FIRE 5000 PSI IN-LINE FLOW SWITCH Features: High pressure in-line flow switch Activates with flows as little as 0.5gpm Ideal for low amp applications Perfect for triggering a solenoid Minimal pressure drop up to 12 GPM Compact design can be mounted in any direction Specifications: Maximum Operating Pressure: 5000 PSI Operating Temperature: 50 F to 175 F. Minimum Flow: 0.5 GPM Maximum Flow: 12 GPM Required Flotation: 60 mesh Inlet/Outlet: 3/8"FPT Electrical Termination: 24AWG 12" leads GP Number - 100716 Switch Ratings: Contact Type: Form A Contact Rating Max: 200VDC Switching Current: 0.2 amps Carry Current: 1.2 amps Breakdown Voltage, Max: 250 VDC Part# 5579 Our Price: $50.81 Qty:
	SURE FIRE 5000 PSI IN-LINE FLOW SWITCH WITH PILOT FEATURE Designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow. Wil provide reliable switching with as little as .75 GPM flow and 18 PSI from the city water supply and will also allow pump output flow up to 18.7 GPM @ 4000 PSI with negligible pressure drop through the valve. Provides durable, reliable on/off switching for systems that require start/stop capability. 16.0 GPM maximum .75 GPM minimum 5000 PSI Maximum 18 PSI minimum 165°F. maximum 3/8" FPT I/O 250 volts 3 amp 96" cord GP Number - 100329 Part# 3022 List Price:$222.34 You save 25% !!! Your Price: $166.76 Qty:
	ST-5 3/8F FLOW SWITCH The ST-5 is a "normally open" flow switch, designed to be mounted in a high pressure water line. Inside the housing is a floating magnet which is aligned parallel with a reed switch. When the water flow is initiated, usually by pulling the spray gun trigger, the water flow forces the magnet to move forward. Once in the correct position, the magnet pulls the thin reeds together, closing the circuit and allowing electrical continuity. When water flow ceases, usually when the trigger is released, gravity returns the magnet to its original position. the reeds then pull apart and open the circuit, stopping electrical continuity. Advantages of Flow Switches: Mounts further downstream in pumping system than traditional vacuum switches, therby minimizing potential leak points that can cause vacuum switches to close. Vacuum switches use rubber diaphragms that often rupture and cause vacuum leaks to the pump Flow switches operate at a variety of pressures Flow switches eliminate the need to restrict water flow to the pump, thereby prolonging pump life the reed switch is encased in a protective glass capsule with a sealed nitrogen atmosphere that eliminates exposure to corrosive cleaning chemicals Specifications: Mounting Position: Vertical only Magnet Configuration: Free floting Pressure, Minimum: 75 PSI Pressure, Maximum: 3600 PSI Flow Rate, Minimum: 1.0 GPM Flow Rate, Maximum: 8.0 GPM Inlet: 3/8" FPT Outlet: 3/8" FPT Cord/Lead Length: 47 inches Weight: 16 oz Wiring Instructions: Lead #1 to Line/Power Lead #2 to Load Yellow with green tracer to Ground Reed Switch Adjustment: depending on the system flow, it is normal for the magnet position to vary. This variance may require adjustment of the reed switch upon initial installation, especially at lower flow rates. If the switch fails to close upon initial flow, simply loosen the adjustment screw and position switch so it properly opens/closes according to flow conditions. Part# 1565 Our Price: $44.21 Qty:
	ST-6 3/8M FLOW SWITCH The ST-6 flow switch is a "normally open" flow switch, designed to be mounted in a high pressure water line. Inside the housing is a floating magnet which is aligned parallel with a reed switch. When the water flow is initiated, usually when the spray gun trigger is pulled, the water flow forces the magnetto move forward. Once in the correct position, the magnet pulls the thin reeds together, closing the circuit and allowing electrical continuity. When water flow ceases, usually when the trigger is released, a light spring returns the magnet to its original position. The reeds then pull apart and open the circuit, stopping electrical continuity. Specifications: Mounting Position: Vertical only Magnet Configuration: Free floting Pressure, Minimum: 75 PSI Pressure, Maximum: 3600 PSI Flow Rate, Minimum: 1.0 GPM Flow Rate, Maximum: 8.0 GPM Inlet: 3/8" FPT Outlet: 3/8" FPT Cord/Lead Length: 47 inches Weight: 16 oz. Wiring Instructions: Lead #1 to Line/Power Lead #2 to Load Yellow with green tracer to Ground Reed Switch Adjustment: depending on the system flow, it is normal for the magnet position to vary. This variance may require adjustment of the reed switch upon initial installation, especially at lower flow rates. If the switch fails to close upon initial flow, simply loosen the adjustment screw and position switch so it properly opens/closes according to flow conditions. Part# 1249 Our Price: $47.58 Qty:
	REED SWITCH The basic Single Pole, Single Throw, Normally Open (SPST-NO) reed switch has two ferromagnetic reeds which are hermetically sealed into a glass capsule. This capsule contains a vacuum. The flattened reeds overlap and are separated by a small gap in the contact area. The contact surfaces are plated with the precious metal Rhodium. In the presence of a magnetic field, the reeds become flux carriers and attractive polarities are set up between the contacts. Closure occurs when the magnetic force exceeds the reed's spring rate. Contacts open when the magnetic force is reduced to less than the reed's restoring force. Original Part #1564 has been superceded to: Part# 6944 Our Price: $24.05 Qty:
	MECCANICA VENETA FLOW SWITCHES 3/8" FPT I/O MV 60 Vertical Switch Part# 6169 Our Price: $63.04 Qty: MV 60 Horizontal Switch Part# 6170 Our Price: $63.25 Qty: MV Reed Switch Replacement Part# 6171 Our Price: $41.95 Qty:

Lawn Mower Parts

FLOW ACTUATED SWITCHES

"TMT" FLOW SWITCH

"TMT" FLOW SWITCH - WITH PILOT FEATURE