Number #1 For Lawn Mower Parts!
Over 1.2 Million Parts Available!

Replacement Parts for Bunton - Bushings and Bearings.

• Replaces Bunton PLO941, P0209
• Fits Bunton Models: Rear height adjuster, most 21" cut decks
  
• Sealed
• ID:0.750"
• OD:1.380"
• Height:0.482"

• Replaces Bunton PL0941/P0209
• 3/4" ID x 1 3/8" OD x 7/16" HT
• With open back race for grease penetration

• Replaces Bunton PL7323
• Bearing 1" ID x 2.046" OD x .839" HT
• Collar 1" ID x 1 1/2" OD x .533" HT
• 1 set screw

• Replaces Bunton PL0678
• Double seal
• 5/8" ID x 1 3/8" OD x 7/16" HT

• Replaces Bunton PL0878
• Fits 32", 36" and 48" cut
• Output shaft support bearing
• 5/8" ID x 1 9/16" OD x 1" HT
• Extended inner race
• Self-aligning type
• 2 set screws
• Click Here for Diagram.

• Replaces Bunton PL0609/PL6141/PL4609
• .984" ID x 2.441" OD x .669" HT

• Replaces Bunton PL4969
• Fits Cooper, King-O-Lawn and Murray lawn edgers
• 5/8" ID x 1 3/8" OD x 7/16" L

• Replaces Bunton PL6141/PL4611; Ref No. 6305-RST (improved longer life bearing)
• .986" ID x 2.436" OD x .667" L

• Replaces Bunton PL0928
• For 10" straight caster support support arm
• OD: 1.125", ID: .875", Width: 1.0"

• Replaces Bunton PJH1060
• For support arm
• 1" ID x 1 1/4" OD x 3/4" HT

• Replaces Bunton PJH1054
• ID:7/8"
• OD:1 1/2"
• Height:1/2"
• Caster spacer on 10" pneumatic front caster

• Replaces PL0417
• 3/4" ID x 1 1/4" OD x 1/4" HT
• Click Here for Diagram.

• Replaces PJH1054
• 1" ID x 1 11/16" OD x 1/2" HT
• 32", 36" and 48" on pneumatic front caster assembly

• Replaces PL0617
• 5/8" ID x 1" OD x 1/4" THK

• Replaces Bunton PL0832

• Replaces Bunton PL0417
• For 6" wheel on old style 32", 36", 48" and 52" mowers
• ID: 3/4", OD: 1-1/4", Width: 1/4"

• Replaces Bunton PL0458
• 1" OD, 3/4" ID, 1-7/8" W, 3/8" center ID, 1/8" thick