Number #1 For Lawn Mower Parts!
Over 1.2 Million Parts Available!

Replacement Commercial for Gravely.

• Replaces 036778/011193
• Heavy-duty style
• Sealed
• 3/4" ID x 1 3/8" OD

• Replaces 51510000
• Spindle Assembly fits ZT series riders

• Replaces 59201000
• Spindle Assembly (outer) fits PM series riders

• Replaces 59202600
• Spindle Assembly (center) fits PM series riders

• Replaces 012984
• .984" ID x 2.441" OD x .669" HT
• Heavy-duty, high quality commercial grade bearing
• Made by Koyo
• Longer life bearing
• Try our Sten Mix hi-temp grease

• Replaces 038199
• Tapered cone type
• 1" ID x 2" race OD x 1/2" HT

• Replaces 011385
• For 40" commercial mower deck
• 3/4" OD shaft
• 2 5/8" spread
• 1/2" diameter holes for axle
• 4 3/8" shaft length

• Replaces 036778/011193
• With open back race for grease penetration
• 3/4" ID x 1 3/8" OD x 7/16" HT

• Replaces 018445
• Fits our 215-095 roller bearing
• 1.781" OD x .475" HT

• Replaces 018446
• Tapered cone
• Fits our 215-087 bearing race
• 3/4" ID x 5/8" HT

• Replaces 011950
• Wheel bushing for front caster wheel
• 1/2" ID x 3/4" OD x 3 3/8" L

• Replaces 018355
• Fits Pro 40, 50, 100 and 200
• 1" ID x 1 3/8" OD x 3/4" HT
• Plastic

• Replaces 04901000
• Fits 5 speed walk behinds with 9 spline transmissions

• Replaces 049011
• 6:1 ratio
• 5/8" input shaft
• 5/8" splined output shaft
• 8 3/4" L x 7" W x 7 3/4" HT
• Cast aluminum housing

• Replaces 013171
• 40" cut commercial
• Fits vertical shaft
• 1 3/8" ID x 2.445" OD x /16" HT
• Metal seal

• Replaces 032050
• Axle bearing on 5000 series 2 wheel tractors
• 1" ID x 2" OD x .560" HT

• Replaces 018042
• Fits 800 series, reverse action clutch bearing
• For 4 wheel tractor
• Bearing with retainging ring
• 1.575" ID x 3.147" OD x .707" HT

• Replaces 021084/02917100
• 3/8"-24 x 7/8" RH male thread
• 3/8"-24 RH female thread

• Replaces 044941
• Fits models 18 G and 20 G
• 1/2"-20 UNF RH female thread
• 1/2" bore
• 2 3/4" overall length

• Replaces 011130
• Fits 400 series and early 800 series
• 10 1/2" overall length
• 3/8"-24 THD

• Replaces 021415
• Fits 800 series and 8000 series engines
• For 12 1/2" tank depth
• 2 1/4" diameter
• 1/4 turn style
• Made by an OEM supplier

• Replaces 018543
• For garden tractors
• 1 5/16" ID inlet
• 1 1/4" ID outlet

• Replaces 021196
• Fits 5000 Series with K301 Kohler engines
• Positive action
• 42" conduit length
• 45 5/8" inner wire length

• Replaces 008225
• Fits 6.6 and 7.6 HP 2 wheel tractors
• Positive action
• 26 1/2" inner wire length
• 24 1/2" conduit length

• Replaces 007354
• 1/8" pipe thread with screen
• Fits 1/4" ID fuel line
• Made by an OEM supplier

• Replaces 045071
• 4 pole style
• 12 volt
• 5/16"-24 studs
• Grounded thru pole
• Base not grounded
• Includes nut and washers

• Replaces 007277
• 5/16" studs
• 3 pole style
• 12 volt
• Grounded thru base

• Replaces 007275
• For starter generators

• Replaces 019223
• 9/16" mounting stem
• For most models
• For battery ignition
• 5 spade terminal
• 3 positions

• Replaces 044767
• Fits Pro-walker and Pro-rider
• For magneto ignition
• 3 position
• 9/16" mounting stem
• 5 spade terminal

• Replaces 045848
• 5 spade terminal
• 1/2" mounting stem
• Includes hardware

• Replaces 020916
• Fits walk behind mowers
• For G Series PTO and G Series Pro
• 2 terminal
• 9/16" mounting stem
• Normally open contact

• Replaces 034640
• Neutral safety
• 2 terminal
• 9/16" mounting stem
• Normally closed contact

• Replaces Original Equipment Manufacturer Part - 255327

• Replaces 00036800
• Recommended by Gravely for use in their spindle assemblies
• Three 3 oz cartridges
• Heavy-duty lithium based grease

• Replaces 00036700
• Recommended by Gravely for use in their spindle assemblies
• Ten 14oz cartridges
• Heavy-duty lithium based grease

• Replaces 051146/053330/08867300/08867351/09279900
• 6" overall
• 1 3/4" shaft
• Two 3.75" mounting slots
• 1000 PSI continuous operating pressure

• Replaces 040216
• 5 Terminals
• Made by an OEM Supplier

• Replaces 09266700/09232700