Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Flow Actuated Switches

Pressure Washer Flow Actuated Switches: Jack’s is your place! We have the Pressure Washer Flow Actuated Switches you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 13 Items Sort by  Result's per page
 


TMT Flow Switch

Part Number: 5393
 
Specs
Temperature: 180° F
Inlet: 3/8" FPT
Gallons Per Minute: 12
Outlet: 3/8" FPT
Equipment Type: Pressure Washer
PSI: 5000

Tri-Magnet Technology In-Line Flow Switch Microswitch Technology Eliminates Reed Switch High Pressure In-Line Flow Switch Activates With As Little As .5GPM Flow Can Be Mounted in Any Position 48", 18 awg lead length
Fits Model

Replaces OEM
Universal : General Pump : 100934
Your Price:
$57.15
 
No Sales Tax, except in MD
Qty:


Suttner ST-5 Vertical Mount Flow Switch

Part Number: 1565
 
Specs
Inlet: 3/8" FPT
Gallons Per Minute: 1-8
Outlet: 3/8" FPT
Weight: 16oz
Equipment Type: Pressure Washer
PSI: 75-3600 PSI

The ST-5 is a "normally open" flow switch, designed to be mounted in a high pressure water line. Inside the housing is a floating magnet which is aligned parallel with a reed switch. When the water flow is initiated, ususally by pulling the spray gun trigger, the water flow forces the magnet to move forward. Once in the correct position, the magnet pulls the thin reeds together, closing the circuit and allowing electrical continuity. When water flow ceases, usually when the trigger is released, gravity returns the magnet to its original position. the reeds then pull apart and open the circuit, stopping electrical continuity. Mounts further downstream in pumping system than traditional vacuum switches, therby minimizing potential leak points that can cause vacuum switches to close. Vacuum switches use rubber diaphragms that often rupture and cause vacuum leaks to the pump Flow switches operate at a variety of pressures Flow switches eliminate the need to restrict water flow to the pump, thereby prolonging pump life the reed switch is encased in a protective glass capsule with a sealed nitrogen atmosphere that eliminates exposure to corrosive cleaning chemicals Mounting Position: Vertical only Magnet Configuration: Free floting Cord/Lead Length: 47 inches WIRING INSTRUCTIONS: Lead #1 to Line/Power, Lead #2 to Load Yellow with green tracer to Ground Reed Switch Adjustment: depending on the system flow, it is normal for the magnet position to vary. This variance may require adjustment of the reed switch upon initial installation, especially at lower flow rates. If the switch fails to close upon initial flow, simply loosen the adjustment screw and position switch so it properly opens/closes according to flow conditions.
Fits Model

Replaces OEM
Universal : Suttner :
Your Price:
$44.21
 
No Sales Tax, except in MD
Qty:


Suttner ST-6 Flow Switch

Part Number: 1249
 
Specs
Inlet: 3/8" FPT
Gallons Per Minute: 1-8
Outlet: 3/8" FPT
Weight: 16oz
Equipment Type: Pressure Washer
PSI: 75-3600

The ST-6 flow switch is a "normally open" flow switch, designed to be mounted in a high pressure water line. Inside the housing is a floating magnet which is aligned parallel with a reed switch. When the water flow is initiated, usually when the spray gun trigger is pulled, the water flow forces the magnetto move forward. Once in the correct position, the magnet pulls the thin reeds together, closing the circuit and allowing electrical continuity. When water flow ceases, usually when the trigger is released, a light spring returns the magnet to its original position. The reeds then pull apart and open the circuit, stopping electrical continuity. Mounts further downstream in pumping system than traditional vacuum switches, thereby minimizing potential leak points that can cause vacuum leaks to the pump Vacuum switches use rubber diaphragms that often rupture and cause vacuum leaks to the pump Flow switches operate at a variety of pressures Flow switches eliminate the need to restrict water flow to the pump, thereby prolonging pump life The reed switch is encased in a protective galss capsule with a sealed nitrogen atmosphere that eliminates exposure to corrosive cleaning chemicals Reed Switch Adjustment: depending on the system flow, it is normal for the magnet position to vary. This variance may require adjustment of the reed switch upon initial installation, especially at lower flow rates. If the switch fails to close upon initial flow, simply loosen the adjustment screw and position switch so it properly opens/closes according to flow conditions. Magnet Configuration: Free floting Cord/Lead Length: 47 inches WIRING INSTRUCTIONS: Lead #1 to Line/Power, Lead #2 to Load, Yellow with green tracer to Ground.
Fits Model

Replaces OEM
Universal :
Your Price:
$47.58
 
No Sales Tax, except in MD
Qty:


Flow Switch With Pilot Feature

Part Number: 3022
 
Specs
Temperature: 190° F
Weight: 2.5 lbs
Equipment Type: Pressure Washer

Designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow. The system will provide reliable switching with a little as .75 GPM flow and 18 PSI from the city water supply and will also allow pump output flow up to 18.7 GPM @ 4000 PSI with negligible pressure drop through the valve. Provides durable, reliable on/off switching for systems that require start/stop capability. Maximum volume/Pressure 18.7 GPM 4000 PSI (minimum burst is 4x working pressure) Minimum Volume/Pressure: .75 GPM 18 PSI Switch Contact Ratings: @24 volts AC 75 watts, 3 amps: @120 volts AC 100 watts, 0.8amps
Fits Model

Replaces OEM
Universal : General Pump : 100329
On Sale!

Reg. Price: $222.34
$166.76
You Save $55.58
(25% Off)
 
No Sales Tax, except in MD
Qty:


Meccanica Veneta 3/8" FPT Horizontal Flow Switch

Part Number: 6170
 
Specs
Temperature: 180°F (80°C) maximum
Inlet: 3/8" FPT
Gallons Per Minute: 8 GPM (30 L/MIN) maximum
Volt: 12-250v maximum
Outlet: 3/8" FPT
Equipment Type: Pressure Washer
PSI: 4350 PSI (300 bar) maximum

Install in Horizontal Position
Fits Model

Replaces OEM
Universal :
Your Price:
$63.25
 
No Sales Tax, except in MD
Qty:


Replacement ST5 Reed Switch

Part Number: 6944
 
Specs
Color: Yellow
Material: Brass
Equipment Type: Pressure Washer

Water Activated Switch to Control the On and Off of the Burner. Suitable for Pressure Washers, and Carpet Cleaning. Mounts further downstream in pumping system than traditional vacuum switches, therby minimizing potential leak points that can cause vacuum switches to close. the reed switch is encased in a protective glass capsule with a sealed nitrogen atmosphere that eliminates exposure to corrosive cleaning chemicals
Fits Model

Replaces OEM
Universal :
Your Price:
$24.05
 
No Sales Tax, except in MD
Qty:


Pilot Valve for General Pump Flow Switch

Part Number: 4196
 
Specs
Equipment Type: Pressure Washer

Designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow. The system will provide reliable switching with a little as .75 GPM flow and 18 PSI from the city water supply and will also allow pump output flow up to 18.7 GPM @ 4000 PSI with negligible pressure drop through the valve. Provides durable, reliable on/off switching for systems that require start/stop capability. Maximum volume/Pressure 18.7 GPM 4000 PSI (minimum burst is 4x working pressure) Minimum Volume/Pressure: .75 GPM 18 PSI Switch Contact Ratings: @24 volts AC 75 watts, 3 amps: @120 volts AC 100 watts, 0.8amps
Fits Model

Replaces OEM
Universal : General Pump : 100331
Your Price:
$21.38
 
No Sales Tax, except in MD
Qty:


TMT Flow Switch With Pilot Feature

Part Number: 5193
 
Specs
Temperature: 40°-180° F Operating Temperature
Inlet: 3/8" FPT
Gallons Per Minute: 12
Outlet: 3/8" FPT
Equipment Type: Pressure Washer
PSI: 4000

Pilot: 1/4" hose barb Lead length: 48" 18awg Electrical service life: 200,000 operations Micro switch technology eliminates reed switch Highpressure inline flow switch Activates with as little as .5 gpm flow Minimal pressure drop up to 12 gpm Mount in vertical position 250 VAC switching voltage maximum 5 Amps switching current maximum 30 OHM contact resistance with leads 200,000 operations electrical service life 10 million operations mechanical service life Install the flow switch VERTICALLY to the output side of the unloader, with the 2 conductor lead wires exiting from the top. If your system uses a downstream chemical injector, it should be mounted on the output side of the flow switch. Pilot model requires a direct connection to the water supply feed line to provide a pilot signal. This is accomplished by installing a tee fitting (with a 1/4" hose barb fitting) directly in the water supply feed line. The tube must be installed before the float valve. Install an appropriate length of 1/4" ID reinforced polyvinyl tubing between the tee fitting and the valve pilot port.
Fits Model

Replaces OEM
Universal : General Pump : 100879
Your Price:
$141.00
 
No Sales Tax, except in MD
Qty:


Sure Fire 5000 PSI In-Line Flow Switch

Part Number: 5579
 
Specs
Temperature: 50° F to 175° F
Inlet: 3/8" FPT
Gallons Per Minute: .5 GPM to 12 GPM
Outlet: 3/8" FPT
Equipment Type: Pressure Washer
PSI: 5000

High pressure in-line flow switch Activates with flows as little as 0.5gpm Ideal for low amp applications Perfect for triggering a solenoid Minimal pressure drop up to 12 GPM Compact design can be mounted in any direction Required Flotation: 60 mesh Electrical Termination: 24AWG 12" leads Switch Ratings: Contact Type: Form A, Contact Rating Max: 200VDC, Switching Current: 0.2 amps, Carry Current: 1.2 amps, Breakdown Voltage, Max: 250 VDC
Fits Model

Replaces OEM
Universal : General Pump : 100716
Your Price:
$50.81
 
No Sales Tax, except in MD
Qty:


Meccanica Veneta 3/8" FPT Vertical Flow Switch

Part Number: 6169
 
Specs
Temperature: 180°F (80°C) Maximum
Inlet: 3/8" FPT
Gallons Per Minute: 8 GPM (30 L/MIN) maximum
Volt: 12-250v Maximum
Outlet: 3/8" FPT
Equipment Type: Pressure Washer
PSI: 4350 PSI (300 bar) maximum

Install in Vertical Position
Fits Model

Replaces OEM
Universal :
Your Price:
$63.04
 
No Sales Tax, except in MD
Qty: