Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Acid Injector

Pressure Washer Acid Injector: Jack’s is your place! We have the Pressure Washer Acid Injector you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 20 Items Sort by  Result's per page
 


Pressure Washer Injector Repair Kit

Part Number: 1966
 
Specs
Includes: 1 spring, 2 o-rings, ceramic ball
Equipment Type: Pressure Washer

Fits All GPM Flow Rates
Fits Model

Replaces OEM
Universal : General Pump : JE Adams :
Your Price:
$7.05
 
No Sales Tax, except in MD
Qty:


2.1mm Adjustable Acid Injector

Part Number: 1959
 
Specs
Inlet: 3/8" MPT
Size: 2.1mm
Gallons Per Minute: 3-4
Outlet: 3/8" MPT
PSI: 3000

Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. Draw rate 0 to 20%, Ceramic ball for injecting acids 1/4" Hose Barb Chemical Port Minimum 35% pressure drop for draw Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
Fits Model

Replaces OEM
Universal : JE Adams :
Your Price:
$35.42
 
No Sales Tax, except in MD
Qty:


1.8mm Adjustable Acid Injector

Part Number: 1958
 
Specs
Temperature: 194°F
Inlet: 3/8" MPT
Size: 1.8mm
Gallons Per Minute: 2-3
Outlet: 3/8" MPT
PSI: 3000

Draw rate 0 to 20%, Ceramic ball for injecting acids Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. Minimum 35% pressure drop for draw 1/4" Hose Barb Chemical Port Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
Fits Model

Replaces OEM
Universal : JE Adams :
Your Price:
$35.42
 
No Sales Tax, except in MD
Qty:


2.3mm High Draw GP Acid Injector

Part Number: 5478
 
Specs
Temperature: 190° F
Inlet: 1/4" Port
Size: 2.3mm
Gallons Per Minute: 5-8
Equipment Type: Pressure Washer
PSI: 3000

One piece quick connect injectors. Nickel plated for acid injection Downstream injector ready to install on your system Chemical draw up to 20% Kit includes injector with quick connect plug on inlet and quick connect socket on outlet of the injector, 4 ft of clear vinyl tubing and a strainer.
Fits Model

Replaces OEM
Universal : General Pump :
Your Price:
$31.64
 
No Sales Tax, except in MD
Qty:


Quick Connect 2.1mm Acid Injector

Part Number: 2179
 
Specs
Gallons Per Minute: 3-4
Orifice: 2.1mm
Equipment Type: Pressure Washer

Quick Connect Plug Inlet, Quick Connect Socket Outlet 4 Feet Clear Vinyl Tubing Strainer With Check Valve Downstream injector ready to install on your system. Kit includes injector with quick connect plug on inlet and quick connect socket on outlet of the injector, 4 ft of clear vinyl tubing and a strainer.
Fits Model

Replaces OEM
Universal : JE Adams :
Your Price:
$43.17
 
No Sales Tax, except in MD
Qty:


2.3mm GP High Draw Adjustable Acid Injector

Part Number: 5730
 
Specs
Temperature: 190° F
Inlet: 3/8" MPT
Outlet: 3/8" MPT
Equipment Type: Pressure Washer
PSI: 4500

Up to 20% injestion Draw Rate 1/4" Hose Barb Chemical Port Made In The U.S.A Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
Fits Model

Replaces OEM
Universal : General Pump :
Your Price:
$24.28
 
No Sales Tax, except in MD
Qty:


ST 62 Adjustable Acid Injector

Part Number: 1719
 
Specs
Temperature: 194° F
Inlet: 3/8" FPT
Gallons Per Minute: Adjustable 2 to 8 gpm injection ratio approx. 10 to 1
Outlet: 3/8" FPT
Equipment Type: Pressure Washer
PSI: 3600

1/4" hose barb
Fits Model

Replaces OEM
Universal : Suttner :
Your Price:
$38.32
 
No Sales Tax, except in MD
Qty:


2.3mm Adjustable Acid Injector

Part Number: 1960
 
Specs
Temperature: 194° F
Inlet: 3/8" MPT
Size: 2.3mm
Gallons Per Minute: 4-5
Outlet: 3/8" MPT
PSI: 3000

Downstream injectors are installed after the pump. In order to function, the pressure must be lowered with the use of either a dual lance and soap nozzle, a variable nozzle, a dual nozzle holder, or an adjustable nozzle holder. Water enters the inlet of the injector and creates a venturi which drops the pressure and suctions the chemical from container. Chemical can be injected either in concentrated form or in diluted form. Chemical can be regulated by turning the dial on the injector or installing a metering device on the chemical line. The injector contains a check valve to prevent water from flowing into the chemical container while in high pressure mode. Draw rate 0 to 20%, Ceramic ball for injecting acids Minimum 35% pressure drop for draw 1/4" Hose Barb Chemical Port Note: Length of hose will determine ability of injector to work properly. It is recommended to keep hose length at 100 feet or less
Fits Model

Replaces OEM
Universal : JE Adams :
Your Price:
$35.42
 
No Sales Tax, except in MD
Qty:


Quick Connect 1.8mm Acid Injector

Part Number: 2178
 
Specs
Gallons Per Minute: 2-3
Orifice: 1.8mm
Equipment Type: Pressure Washer

Quick Connect Plug Inlet, Quick Connect Socket Outlet 4 Feet Clear Vinyl Tubing Strainer With Check Valve Downstream injector ready to install on your system. Kit includes injector with quick connect plug on inlet and quick connect socket on outlet of the injector, 4 ft of clear vinyl tubing and a strainer.
Fits Model

Replaces OEM
Universal : JE Adams :
Your Price:
$43.17
 
No Sales Tax, except in MD
Qty:


Quick Connect 2.3mm Acid Injector

Part Number: 2180
 
Specs
Gallons Per Minute: 4-5
Orifice: 2.3mm
Equipment Type: Pressure Washer

Quick Connect Plug Inlet, Quick Connect Socket Outlet 4 Feet Clear Vinyl Tubing Strainer With Check Valve Downstream injector ready to install on your system. Kit includes injector with quick connect plug on inlet and quick connect socket on outlet of the injector, 4 ft of clear vinyl tubing and a strainer.
Fits Model

Replaces OEM
Universal : JE Adams :
Your Price:
$43.17
 
No Sales Tax, except in MD
Qty: