Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Rotating Nozzle Kit

Pressure Washer Rotating Nozzle Kit: Jack’s is your place! We have the Pressure Washer Rotating Nozzle Kit you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 44 Items Sort by  Result's per page
 


Repair Kit for 6.0 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4810
 
Specs
Temperature: 212°F
Inlet: 1/4"
Nozzle Size: 6.0
Includes: Ceramic Tip, Rotor, and O-Ring
Equipment Type: Pressure Washer
PSI: 3700

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
Your Price:
$44.16
 
No Sales Tax, except in MD
Qty:


Repair Kit For 5.5 DK Black Dirt Killer Rotating Nozzle

Part Number: 1031
 
Specs
Temperature: 180° F
Color: Black
Inlet: 1/4"
Nozzle Size: 5.5
PSI: 3200

Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles. Note: Must be started with nozzle pointed to ground
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$72.24
 
No Sales Tax, except in MD
Qty:


Rotomax Repair Kit

Part Number: 1185
 
Specs
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal : General Pump :
Your Price:
$32.21
 
No Sales Tax, except in MD
Qty:


Rotomax Replacement Rotor

Part Number: 3333
 
Specs
Equipment Type: Pressure Washer

Note: Fits All Rotomax Rotating Nozzles
Fits Model

Replaces OEM
Universal : General Pump :
Your Price:
$28.06
 
No Sales Tax, except in MD
Qty:


Repair Kit For 4.0 Roto-Jet 4500 PSI Rotating Nozzle

Part Number: 5939
 
Specs
Temperature: 212°F
Inlet: 1/4"
Nozzle Size: 4.0
Includes: Ceramic Tip, Rotor, and O-Ring
Equipment Type: Pressure Washer
PSI: 4500

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
Your Price:
$58.46
 
No Sales Tax, except in MD
Qty:


Repair Kit For 3.5 DK White Dirt Killer Rotating Nozzle

Part Number: 1029
 
Specs
Temperature: 180° F
Color: White
Inlet: 1/4"
Nozzle Size: 3.5
PSI: 3200

Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning Note: Must be started with nozzle pointed to ground Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$72.24
 
No Sales Tax, except in MD
Qty:


Repair Kit for 4.5 DK Yellow Dirt Killer Rotating Nozzle

Part Number: 1033
 
Specs
Temperature: 180° F
Color: Yellow
Inlet: 1/4"
Nozzle Size: 4.5
PSI: 3200

Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning Note: Must be started with nozzle pointed to ground Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$72.24
 
No Sales Tax, except in MD
Qty:


Repair Kit For 8.0 IDK Red Dirt Killer Rotating Nozzle

Part Number: 1035
 
Specs
Temperature: 200° F
Color: Red
Inlet: 1/4" FPT
Nozzle Size: 8.0
PSI: 4700

Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle. Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool. By using properly, the Dirt Killer will perform as follows: at 3000 PSI aproximately 250 to 400 hours: at 2000 PSI approximately 300 to 500 hours: at 1000 PSI approximatley 400 to 700 hours before rebuilding or replacing REBUILDING INSTRUCTIONS: (1) Remove cover and unscrew inlet adapter. (2) Remove turbine nozzle and check for clogs. (3) If clogged, clear turbine nozzle re-assemble. (4) To rebuild entire nozzle remove entire contents, to include seat. (5) Put small o-ring on tip of seat with loctite and press seat into tip of nozzle. (6) Change large o-ring on inlet adapter. (7). Drop turbine nozzle into nozzle body and screw inlet adapter on. Back of nozzle turbine should NOT be centered. (8) Put cover back on Dirt Killer SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND.
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$99.03
 
No Sales Tax, except in MD
Qty:


Repair Kit For 5.5 IDK Black Dirt Killer Rotating Nozzle

Part Number: 1038
 
Specs
Temperature: 200° F
Color: Black
Inlet: 1/4" FPT
Nozzle Size: 5.5
PSI: 4700

Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle. Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool. By using properly, the Dirt Killer will perform as follows: at 3000 PSI aproximately 250 to 400 hours: at 2000 PSI approximately 300 to 500 hours: at 1000 PSI approximatley 400 to 700 hours before rebuilding or replacing. REBUILDING INSTRUCTIONS: (1) Remove cover and unscrew inlet adapter. (2) Remove turbine nozzle and check for clogs. (3) If clogged, clear turbine nozzle re-assemble. (4) To rebuild entire nozzle remove entire contents, to include seat. (5) Put small o-ring on tip of seat with loctite and press seat into tip of nozzle. (6) Change large o-ring on inlet adapter. (7). Drop turbine nozzle into nozzle body and screw inlet adapter on. Back of nozzle turbine should NOT be centered. (8) Put cover back on Dirt Killer SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$99.03
 
No Sales Tax, except in MD
Qty:


Repair Kit For 4.5 IDK Yellow Dirt Killer Rotating Nozzle

Part Number: 1692
 
Specs
Temperature: 200° F
Color: Green
Inlet: 1/4" FPT
Nozzle Size: 4.5
PSI: 4700

Spins slower than DK nozzle, Produces greater impact, For water blasting, Heavy duty cleaning. Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle. Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool. By using properly, the Dirt Killer will perform as follows: at 3000 PSI aproximately 250 to 400 hours: at 2000 PSI approximately 300 to 500 hours: at 1000 PSI approximatley 400 to 700 hours before rebuilding or replacing. REBUILDING INSTRUCTIONS: (1) Remove cover and unscrew inlet adapter. (2) Remove turbine nozzle and check for clogs. (3) If clogged, clear turbine nozzle re-assemble. (4) To rebuild entire nozzle remove entire contents, to include seat. (5) Put small o-ring on tip of seat with loctite and press seat into tip of nozzle. (6) Change large o-ring on inlet adapter. (7). Drop turbine nozzle into nozzle body and screw inlet adapter on. Back of nozzle turbine should NOT be centered. (8) Put cover back on Dirt Killer SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND. Note: Must be started with nozzle pointed to ground
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$99.03
 
No Sales Tax, except in MD
Qty: