Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Rotating Nozzle

Pressure Washer Rotating Nozzle: Jack’s is your place! We have the Pressure Washer Rotating Nozzle you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 40 Items Sort by  Result's per page
 


5.0 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4802
 
Specs
Temperature: 212° F
Inlet: 1/4"
Nozzle Size: 5.0
Equipment Type: Pressure Washer
PSI: 3700

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
Your Price:
$65.61
 
No Sales Tax, except in MD
Qty:


Rotomax #3 Black Rotating Nozzle

Part Number: 1415
 
Specs
Temperature: 200° F
Color: Black
Inlet: 1/4"FPT
Gallons Per Minute: 4.2-5.5
Weight: .6lb
PSI: 1450-3500

Designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero degree nozzle. The unique internal design allows aim and shoot operation even when cleaning overhead, and permits easy replacement of all wear parts. Sized according to flow rate, rotomax is perfect for your toughest cleaning tasks. Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Do not tighten the Rotomax by the plastic cover. Use a wrench on the hex portion of the inlet nipple (#10 on the parts break down). This will avoid stripping the holding screw on the plastic cover. Also, tightening the hex too much will prevent the rotor from spinning. Always use with a high pressure inlet filter. All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Fits Model

Replaces OEM
Universal : General Pump :
Your Price:
$76.34
 
No Sales Tax, except in MD
Qty:


4.5 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4801
 
Specs
Temperature: 212° F
Inlet: 1/4"
Nozzle Size: 4.5
Equipment Type: Pressure Washer
PSI: 3700

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
Your Price:
$65.61
 
No Sales Tax, except in MD
Qty:


5.5 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4803
 
Specs
Temperature: 212° F
Inlet: 1/4"
Nozzle Size: 5.5
Equipment Type: Pressure Washer
PSI: 3700

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
Your Price:
$65.61
 
No Sales Tax, except in MD
Qty:


6.0 Roto-Jet 5800 PSI Rotating Nozzle

Part Number: 4816
 
Specs
Temperature: 200° F
Inlet: 1/4"
Nozzle Size: 6.0
Equipment Type: Pressure Washer
PSI: 5800

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increases cleaning ability with the impact of a 0 degree flat nozzle with a 25 degree pattern. Roto-Jet produces up to 5000 PSI of cleaning power to handle almost any high pressure spraying application. Can be used on the following: Rust removal, tank cleaning, paint and graffiti removal, mildew removal, kennel cleaning, hog house cleaning, grease removal, brick cleaning and restoration, etc. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
On Sale!

Reg. Price: $150.74
$113.06
You Save $37.68
(25% Off)
 
No Sales Tax, except in MD
Qty:


5.5 DK Black Dirt Killer Rotating Nozzle

Part Number: 1032
 
Specs
Temperature: 180° F
Color: Black
Inlet: 1/4"
Nozzle Size: 5.5
PSI: 3200

Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning Note: Must be started with nozzle pointed to ground Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles.
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$105.55
 
No Sales Tax, except in MD
Qty:


4.5 DK Yellow Dirt Killer Rotating Nozzle

Part Number: 1034
 
Specs
Temperature: 180° F
Color: Yellow
Inlet: 1/4"
Nozzle Size: 4.5
PSI: 3200

Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. Spins Faster than IDK nozzle, No lines or streaking, Used for cleaning Note: All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles. Note: Must be started with nozzle pointed to ground
Fits Model

Replaces OEM
Universal : Dirt Killer :
Your Price:
$105.55
 
No Sales Tax, except in MD
Qty:


5.5 IDK Black Dirt Killer Rotating Nozzle

Part Number: 1039
 
Specs
Temperature: 200° F
Color: Black
Inlet: 1/4" FPT
Nozzle Size: 5.5
PSI: 4700

Blast dirt, grime, slime, mold, mildew, etc. off instantly using the Dirt Killer nozzle. Save chemical, water, time, and money. The Dirt Killer generates a whirl wind of water droplets so powerful the imbedded dirt is blown away. Dirt Killer nozzles, which feature a rotating turbine, deliver the punch of a zero degree nozzle with a 25 degree fan, creating 10 times the cleaning impact of a standard flat tip nozzle. Industrial Dirt Killer is the world's most powerful cleaning nozzle. It also features a spinning head, which moves at a much slower speed to produce large water droplets that deliver a devastating blasting force. The IDK has the ability to attack and thoroughly clean 3-dimensional surfaces such as concrete and steel. Difficult cleaning projects, such as crab pots, hog confinements, farrowing crates, milk barns, and many others, are made easy with this incredible tool. By using properly, the Dirt Killer will perform as follows: at 3000 PSI aproximately 250 to 400 hours: at 2000 PSI approximately 300 to 500 hours: at 1000 PSI approximatley 400 to 700 hours before rebuilding or replacing. SERVICE ADVISORY: Using a high pressure filter increases the life of the IDK nozzle. When using with hot water, it is strongly recommended you use the filter and lubricate the nozzle every 2 to 3 hours with a teflon blended oil. Do not touch rotating water pattern. ALWAYS START WITH THE NOZZLE POINTING TOWARDS THE GROUND.
Fits Model

Replaces OEM
Universal : Dirt Killer :
On Sale!

Reg. Price: $193.10
$144.83
You Save $48.27
(25% Off)
 
No Sales Tax, except in MD
Qty:


Rotomax #2 Blue Rotating Nozzle

Part Number: 1414
 
Specs
Temperature: 200° F
Color: Blue
Inlet: 1/4"FPT
Gallons Per Minute: 2.9-4.2
Weight: .6lb
PSI: 1450-3500

Designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero degree nozzle. The unique internal design allows aim and shoot operation even when cleaning overhead, and permits easy replacement of all wear parts. Sized according to flow rate, rotomax is perfect for your toughest cleaning tasks. Rotating Nozzles are designed to clean with the impact of zero degree flat spray nozzles but with the pattern of a 25 degree nozzle. Rotating nozzles will cut your cleaning time in half. With a rotating nozzle, you can clean the following quickly; rust removal, tank cleaning, paint and graffiti removal, brick cleaning, concrete, gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, and removing mud and clay from highway equipment. All rotating nozzles MUST be started with the nozzle pointing to the ground. This prevents damage to the ceramic orifice. It is highly recommended that a high pressure filter be used with each nozzle. Not using a filter could void any warranty. Eye protection must be worn while using these nozzles. Do not tighten the Rotomax by the plastic cover. Use a wrench on the hex portion of the inlet nipple (#10 on the parts break down). This will avoid stripping the holding screw on the plastic cover. Also, tightening the hex too much will prevent the rotor from spinning. Always use with a high pressure inlet filter.
Fits Model

Replaces OEM
Universal : General Pump :
Your Price:
$76.34
 
No Sales Tax, except in MD
Qty:


4.0 Roto-Jet 3700 PSI Rotating Nozzle

Part Number: 4800
 
Specs
Temperature: 212° F
Inlet: 1/4"
Nozzle Size: 4.0
Equipment Type: Pressure Washer
PSI: 3700

It is recommended to use a high pressure filter to prevent internal damage from water minerals. Rotating nozzle increase cleaning ability with the impact of a 0 wide angle spray coverage. The Roto-Jet produces up to 3000 PSI of cleaning power to handle almost any high pressure spraying application. Note: START THIS NOZZLE IN THE DOWN POSITION TO PREVENT CERAMIC DAMAGE
Fits Model

Replaces OEM
Universal :
Your Price:
$65.61
 
No Sales Tax, except in MD
Qty: