Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Sand Blast Kit

Pressure Washer Sand Blast Kit: Jack’s is your place! We have the Pressure Washer Sand Blast Kit you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 19 Items Sort by  Result's per page
 


Deluxified Industrial Sand Blast Kit

Part Number: 4700
 
Specs
Equipment Type: Pressure Washer

This upgraded industrial sand blast kit includes everything you will need to attach it to your pressure washer gun. The kit includes 3 spray nozzles so you can use the kit with various sizes of pressure washers. An 18" wand pipe and side handle feature helps relieve fatigue by giving the operator a more comfortable hold while sand blasting for long periods of time. Keep mixing head pointed down to prevent water from returning to sand container. Includes 1 Piece Tungsten Carbide Nozzle, 18" Wand Pipe with Side Handle, Cast Aluminum Mixing Body With Gasket, Sand Probe, 20' of 3/4" Spiroflex Hose, Hose Clamps, 3 Spray Nozzles Zero Degree Sizes 4.0, 4.5, 5.5, 22mm Socket and Nozzle to Mount Solidly to the Outlet of the Spray Gun. (Gun Not Included) Installation, Instruction, and Parts Break Down Manual, Working flow of 4 GPM @ 3000 PSI to 8 GPM @ 5000 PSI. Use 5 degree nozzles only (sold separately).
Fits Model

Replaces OEM
Universal :
On Sale!

Reg. Price: $157.54
$118.16
You Save $39.38
(25% Off)
 
No Sales Tax, except in MD
Qty:


Tungsten Carbide Nozzle & Holder

Part Number: 6503
 
Specs
Material: Tungsten Carbide
Equipment Type: Pressure Washer

Heavy duty industrial grade sand blast kit. Will remove coatings from almost any surface, such as metal, heavy graffiti accumulations, and paint preparation. Working flow of 4 GPM @ 3000 PSI to 8 GPM @ 5000 PSI. Use 5 degree nozzles only (sold separately).
Fits Model

Replaces OEM
Universal :
Your Price:
$70.91
 
No Sales Tax, except in MD
Qty:


7.0 Stainless Steel Sand Blast Orifice

Part Number: 4938
 
Specs
Nozzle Size: 7.0
Material: Stainless Steel
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal :
Your Price:
$7.49
 
No Sales Tax, except in MD
Qty:


Replacement Industrial Sand Blast Kit WB7 Gasket

Part Number: 6350
 
Specs
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal :
Your Price:
$1.14
 
No Sales Tax, except in MD
Qty:


3.5 Brass Nozzle Sand Blast Kit

Part Number: 2340
 
Specs
Temperature: 190° F
Gallons Per Minute: 8
Nozzle Size: 3.5
Material: Brass
Includes: Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Equipment Type: Pressure Washer
PSI: 3650

Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results. Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Fits Model

Replaces OEM
Universal :
Your Price:
$87.08
 
No Sales Tax, except in MD
Qty:


4.5 Brass Nozzle Sand Blast Kit

Part Number: 2642
 
Specs
Temperature: 190° F
Gallons Per Minute: 8
Nozzle Size: 4.5
Material: Brass
Includes: Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Equipment Type: Pressure Washer
PSI: 3650

Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results.Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Fits Model

Replaces OEM
Universal :
Your Price:
$87.08
 
No Sales Tax, except in MD
Qty:


5.5 Brass Nozzle Sand Blast Kit

Part Number: 2643
 
Specs
Temperature: 190° F
Gallons Per Minute: 8
Nozzle Size: 5.5
Material: Brass
Includes: Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Equipment Type: Pressure Washer
PSI: 3650

Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results. Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow
Fits Model

Replaces OEM
Universal :
Your Price:
$87.08
 
No Sales Tax, except in MD
Qty:


6.0 Brass Nozzle Sand Blast Kit

Part Number: 2644
 
Specs
Temperature: 190° F
Gallons Per Minute: 8
Nozzle Size: 6.0
Material: Brass
Includes: Carbide Tip, 24" Wand, 25 Feet of Polybraid Hose
Equipment Type: Pressure Washer
PSI: 3650

Designed for sandblasting of various surfaces. This sand blast kit removes most coatings down to white metal, grafitti clean up, and paint surface preparation. Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results. Installation Instructions 1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle. 2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed 3. Turn adjustment knob fully clockwise for maximum sand flow.
Fits Model

Replaces OEM
Universal :
Your Price:
$87.08
 
No Sales Tax, except in MD
Qty:


Brass Carbide Replacement Tip

Part Number: 2645
 
Specs
Material: Brass
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal :
Your Price:
$34.18
 
No Sales Tax, except in MD
Qty:


Brass Sandblast Nozzle Body

Part Number: 3377
 
Specs
Material: Brass
Equipment Type: Pressure Washer


Fits Model
UNIVERSAL :

Replaces OEM
Universal :
Your Price:
$61.62
 
No Sales Tax, except in MD
Qty: