Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Pumps Made Ready

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 18 Items Sort by  Result's per page
 


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6570
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 2.88
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 11.4 lbs
Equipment Type: Pressure Washer
PSI: 2500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VB3K adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. IDEAL FOR ALL GENERAL CLEANING APPLICATIONS Forged brass manifold with exclusive lifetime warranty New, oversized connecting rods for ultimate crankcase performance Die cast, anodized aluminum, oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original interpump unitized, stainless steel, K123 inlet and outlet valves SAE J609 gasoline engine mounting flange Rated Pump Speed: 3400 RPM Stroke: 6.6mm Crankcase Oil Capacity: 11.0 oz. Maximum Fluid Temperature: 165 F. Unloader: VB3KTT
Fits Model
GENERAL PUMP : TP2530J34

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $486.08
$364.56
You Save $121.52
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2983
 
Specs
Type: Gas Flange Pump
Gallons Per Minute: 3.0
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2200

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive with Gas Flange Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 4.5 bhp Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter. Unloader: VRT3-160
Fits Model
AR PUMPS : VRT3-160

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $605.72
$454.29
You Save $151.43
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3000
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20.3 lbs
Equipment Type: Pressure Washer
PSI: 3500

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankcase for easy right or left hand mounting Solid brass manifolds Hardened stainless steel piston guides Highly efficient stainless steel check valves Solid ceramic plungers High and low pressure seals: high quality buna-textile packings Additional anti-extrusion ring under the seal Special forged brass oversized connecting rods Die cast anodized aluminum crankcase High quality ball bearings Optimal oil bath for high speed operation Maximum Pump speed: 3400 RPM Minimum Horsepower Requirements: 12.75 hp for gas engines Crankcase Capacity: 18 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break in period, then in 500 hour intervals thereafter.
Fits Model
COMET : FWD4035G-VRT3-310EZ

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $793.60
$595.20
You Save $198.40
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3631
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" X 6.5"
Gallons Per Minute: 4.6
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 19.1 lbs
Equipment Type: Pressure Washer
PSI: 3000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Maximum Pump Speed: 3400 RPM Maximum Inlet Pressure: 125 PSI Stroke: 11mm (.433") Crankcase Oil Capacity: 14.0 oz. Maximum Fluid temperature: 165° F Flanged for Direct Couple to Gasoline Engines Flanged for Mounting on up to 13 Horsepower Engines
Fits Model
GENERAL PUMP : EZ3045G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3696
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 10.8 hp for gas engines Stroke: .295" (7.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondtergent SAE 30W oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-310EZ
Fits Model
GENERAL PUMP : EZ3035G-VRT3-250

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4588
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2500

Reversible crankshaft for easy righ or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings High quality oversized bearings Design for optimal operating temperature Die-cast anodized aluminum chrankshaft fin Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 7.5 hp for gas engines Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VRT3-310EZ Built In Uniflow Unloader and Adjustable Chemical Injector Ceramic Plungers Forged Brass Manifold Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection.
Fits Model
COMET : LWD3025G

Replaces OEM
Universal : Comet : 6303.0754.00
On Sale!

Reg. Price: $427.50
$320.63
You Save $106.87
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4924
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Pump Maximum Inlet Pressure: 125 PSI Minimum Horsepower Requirements: 5.3 hp for gas engine Stroke: .315" (8mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-160 Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With an Exclusive Lifetime Warranty
Fits Model
GENERAL PUMP : TT2035GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $555.72
$416.79
You Save $138.93
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5067
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 17.5 lbs
Equipment Type: Pressure Washer
PSI: 3500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 13 hp for gas engines Crankcase Capacity: 14 oz. use SAE 20W/30 oil Piston: 15mm Unloader: VRT3-310EZ Your Unloader and Pressure Relief Valve May Need to Be Adjusted Prior to Useage
Fits Model
COMET : ZWD4035G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $527.36
$395.52
You Save $131.84
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 5833
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 2.85
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 17 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VB3K adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Gas Flange Maximum Inlet Pressure: 125 PSI Minimum Horsepower Requirements: 5.9 hp for gas engine Stroke: .260" (6.6mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Lubrication: Fill the crankcase to oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VB3KTT Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With An Exclusive Lifetime Warranty. Maximum Fluid Temperature: 165° F
Fits Model
GENERAL PUMP : TT2028GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $532.98
$399.74
You Save $133.24
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump With Built In Unloader

Part Number: 5930
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum, oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves Ideal for all general cleaning, RO, and misting applications Comes standard with NEMA 56C electric motor mounting flange Also available in "L" left handed version Direct Drive Pump Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 5.3 hp for gas engine Stroke: .315" (8mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VR54
Fits Model
GENERAL PUMP : VR54

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $539.44
$404.58
You Save $134.86
(25% Off)
 
No Sales Tax, except in MD
Qty: