Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Pumps Made Ready

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 12 Items Sort by  Result's per page
 


3/4" Gas Flange Hollow Shaft Pump Made Ready

Part Number: 5923
 
Specs
Type: Hollow Shaft Pump
Gallons Per Minute: 3.0
Shaft Size: Hollow 3/4" ID
Weight: 12 lbs
Equipment Type: Pressure Washer
PSI: 2500

COMMERCIAL DUTY RADIAL-AXIAL PUMPS Abrasion proof, heat resistant, industrial ceramic plungers Stainless steel unitized check valves Forged brass manifold Industrial duty construction for extended life Patent registered ball bearing design Built-in garden hose adapter Double sealing buna textile V-packing Maximum Pump Speed: 3400 RPM
Fits Model
COMET : AXD3025G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $319.90
$239.93
You Save $79.97
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2968
 
Specs
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankshaft for easy right or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings Design for optimal operating temperature High quality oversized bearings Die-cast anodized aluminum chrankshaft fin Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 6.0 hp for gas engines Crankcae Capacity: 9.87 oz use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VR54 Built In Uniflow Unloader and Adjustable Chemical Injector Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection. Gas Flange Pumps
Fits Model
COMET : LWD3025G

Replaces OEM
Universal : Comet : 6303.0754.00
On Sale!

Reg. Price: $415.00
$311.25
You Save $103.75
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2983
 
Specs
Type: Gas Flange Pump
Gallons Per Minute: 3.0
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2200

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive with Gas Flange Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 4.5 bhp Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter. Unloader: VRT3-160
Fits Model
AR PUMPS : VRT3-160

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $605.72
$454.29
You Save $151.43
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3467
 
Specs
Type: Electric Flange Pump
Inlet: 3/8" FPT
Size: 9.13" x 6.65" x 6.50"
Gallons Per Minute: 3.0
Bore: .708" (18mm)
Outlet: Dual 3/8" FPT
Shaft Size: Hollow 5/8" ID
Weight: 14 lbs
Equipment Type: Pressure Washer
PSI: 1500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. We have added some features to the standard 2SFX. these include an inlet fitting, and pressure relief valve. UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities. Ultimate portability, less than 11 pounds, less than 10" long. Regulating unloader is standard on each pump to assure system pressure control and pump protection Maximum Inlet Pressure: 75 PSI Maximum Pump Speed: 3450 RPM Minimum Horsepower Requirements: 3.0 bhp Stroke: .177" (4.5mm) Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil Maximum Fluid Temperature: 160 Degrees F. By-pass Port: 1/4" FPT Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter. High Temp Pump Unloader: 7500XS
Fits Model
CAT PUMPS : 2SFX30ES3

Replaces OEM
Universal : Cat Pumps :
On Sale!

Reg. Price: $839.48
$629.61
You Save $209.87
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4588
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2500

Reversible crankshaft for easy righ or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings High quality oversized bearings Design for optimal operating temperature Die-cast anodized aluminum chrankshaft fin Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 7.5 hp for gas engines Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VRT3-310EZ Built In Uniflow Unloader and Adjustable Chemical Injector Ceramic Plungers Forged Brass Manifold Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection.
Fits Model
COMET : LWD3025G

Replaces OEM
Universal : Comet : 6303.0754.00
On Sale!

Reg. Price: $427.50
$320.63
You Save $106.87
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5321
 
Specs
Type:
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Gallons Per Minute: 5.5
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive with Gas Flange Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirement: 9.3 hp for gas engines Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VRT3-310EZ High Strength Forged Brass Manifold for Long Term Use Eight 6mm Bolts A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $550.36
$412.77
You Save $137.59
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6049
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 2500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 6.5 Gas HP Unloader: VRT3-250 Rail Kits: AR2729: 5/8" AR2633H: 2-5/8" High Strength Forged Brass Manifold For Long Term Use Eight 6mm Grade 12.9 Bolts A Special Thick Solid Ceramic Plunger for Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase, Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass Fill. Side and Bottom Drain Plugs Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : XMV3G27D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $559.76
$419.82
You Save $139.94
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6262
 
Specs
Type: Gas Flange Pump
Gallons Per Minute: 3.0
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2200

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive with Gas Flange Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 4.5 bhp Lubrication: use 20W-30 oil. Change oil after a 50 hour break-in period, and in 500 hour intervals thereafter. Unloader: VR54 High Strength Forged Brass Manifold For Long Term Use Eight 6mm Bolts New Ceramic Plungers, Thicker Wall to Help Prevent Thermal Shock Forged Precision Ground Crankcase Stainless Steel Valve Seat. O-Ring is Side Mounted High Quality High Pressure Seals. New Low Pressure Seal With Built In Scraper. Two Piece Piston Guides
Fits Model
AR PUMPS : XTV3G22D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $627.90
$470.93
You Save $156.97
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6301
 
Specs
Type: Gas Flange Pump
Gallons Per Minute: 3.0
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a Bolt-on adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive with Gas Flange Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirement: 9.3 hp for gas engines Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: Bolt On MV566 High Strength Forged Brass Manifold for Long Term Use Eight 6mm Grade 12.9 Bolts A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $613.16
$459.87
You Save $153.29
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6424
 
Specs
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 2500

Rail Kits: AR2729: 5/8" AR2633H: 2-5/8" Unloader: Bolt On-AR20821 Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a bolt-on adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Maximum Pump Speed: 3400 RPM Horsepower: 6.5 Gas HP Manifold: High strength forged brass for long term use. Bolts: Eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience. Crankcase: Precision die-cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs. Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive sideand ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating. Valves, Seats, and Springs: Stainless steel with specially designed Ultra Form material valve cages that are impervious to water absorption and provide long life and positive seating. Seals and V-Packings: Continuously lubricating for extended life. Plunger Rods: High strength stainless steel. Connecting Rods: One piece special alloy aluminum based, oversized for maximum strength, load disbursement, and long life. Heavy pin area construction, for added load strength.
Fits Model
AR PUMPS : XMV3G27D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $592.28
$444.21
You Save $148.07
(25% Off)
 
No Sales Tax, except in MD
Qty: