Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


PRESSURE WASHER PUMPS MADE READY

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 23 Items Sort by  Result's per page
 


3/4" Gas Flange Axial Shaft Pump Made Ready

Part Number: 6444
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" MPT
Gallons Per Minute: 2.5
Bore: .591" (15mm)
Outlet: 3/8" MPT
Shaft Size: 3/4"
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 2500

High strength forged brass manifold for long term use Three 10mm grade 8.8 bolts Ceramic coated stainless steel pistons for longer life in harsh environments Angular contact ball bearings stabilizes the cranshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All are made of heat treated steel for extended life. Stainless steel valves, seats, and springs with specially designed ultra form cages to provide extra long life and positive seating Continuously lubricating seals and v-packings for extended life Built-in unloader to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector. SPECIAL NOTE: Use synthetic oil only. (part#6601). DO NOT change oil. Ue oil only to add if low. This oil is specially formulated synthetic oil with special additives for the demands ov the XJ pump series. No other oil is factory approved for this pump, and could result in pump failure. Maximum pump speed: 3400 RPM Stroke: 5.8mm Maximum fluid temperature: 140° F Crancase oil capacity: 4.5 oz.
Fits Model
AR PUMPS : SJV2.5G27D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $376.22
$282.17
You Save $94.05
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6044
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" MPT
Gallons Per Minute: 2.5
Bore: .591" (15mm)
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 2700

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a built-in pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Maximum pump speed: 3400 RPM Stroke: 5.8mm Maximum fluid temperature: 140 F Crancase oil capacity: 4.5 oz.
Fits Model
AR PUMPS : SJV25G27D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $392.04
$294.03
You Save $98.01
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6570
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 2.88
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 11.4 lbs
Equipment Type: Pressure Washer
PSI: 2500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VB3K adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. IDEAL FOR ALL GENERAL CLEANING APPLICATIONS Forged brass manifold with exclusive lifetime warranty New, oversized connecting rods for ultimate crankcase performance Die cast, anodized aluminum, oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original interpump unitized, stainless steel, K123 inlet and outlet valves SAE J609 gasoline engine mounting flange Rated Pump Speed: 3400 RPM Stroke: 6.6mm Crankcase Oil Capacity: 11.0 oz. Maximum Fluid Temperature: 165 F. Unloader: VB3KTT
Fits Model
GENERAL PUMP : TP2530J34

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $486.08
$364.56
You Save $121.52
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2922
 
Specs
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 2.85
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Gas Flange Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 5.9 hp for gas engine Stroke: .260" (6.6mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-160 Gas Flange Pumps
Fits Model
GENERAL PUMP : TT2028GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $554.86
$416.15
You Save $138.71
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 2926
 
Specs
Type: Electric Flange Pump
Inlet: 3/8" FPT
Size: 7.2" x 6.9" x 5.5"
Gallons Per Minute: 2.1
Bore: .591" (15mm)
Outlet: 1/4" FPT
Shaft Size: Hollow 5/8" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 1500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum, oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves Ideal for all general cleaning, RO, and misting applications Comes standard with NEMA 56C electric motor mounting flange Also available in "L" left handed version Direct Drive Pump with flange for electric motor Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1750 RPM Minimum Horsepower Requirements: 2.2 bhp Stroke: .370" (9.4mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-160
Fits Model
GENERAL PUMP : T9051EBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $564.32
$423.24
You Save $141.08
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 2992
 
Specs
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Stroke: .374" (9.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: Fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change the oil afte 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Flanged For Mounting on Up To 13 Horsepower Engines Maximum Inlet Pressure 125 PSI Gas Flange Pumps
Fits Model
GENERAL PUMP : EZ3040G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3631
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" X 6.5"
Gallons Per Minute: 4.6
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 19.1 lbs
Equipment Type: Pressure Washer
PSI: 3000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Maximum Pump Speed: 3400 RPM Maximum Inlet Pressure: 125 PSI Stroke: 11mm (.433") Crankcase Oil Capacity: 14.0 oz. Maximum Fluid temperature: 165° F Flanged for Direct Couple to Gasoline Engines Flanged for Mounting on up to 13 Horsepower Engines
Fits Model
GENERAL PUMP : EZ3045G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3696
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 10.8 hp for gas engines Stroke: .295" (7.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondtergent SAE 30W oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-310EZ
Fits Model
GENERAL PUMP : EZ3035G-VRT3-250

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4924
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Pump Maximum Inlet Pressure: 125 PSI Minimum Horsepower Requirements: 5.3 hp for gas engine Stroke: .315" (8mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-160 Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With an Exclusive Lifetime Warranty
Fits Model
GENERAL PUMP : TT2035GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $555.72
$416.79
You Save $138.93
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5067
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 17.5 lbs
Equipment Type: Pressure Washer
PSI: 3500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 13 hp for gas engines Crankcase Capacity: 14 oz. use SAE 20W/30 oil Piston: 15mm Unloader: VRT3-310EZ Your Unloader and Pressure Relief Valve May Need to Be Adjusted Prior to Useage
Fits Model
COMET : ZWD4035G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $527.36
$395.52
You Save $131.84
(25% Off)
 
No Sales Tax, except in MD
Qty: