Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


PRESSURE WASHER PUMPS MADE READY

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 7 Items Sort by  Result's per page
 


3/4" Gas Flange Axial Shaft Pump Made Ready

Part Number: 6444
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" MPT
Gallons Per Minute: 2.5
Bore: .591" (15mm)
Outlet: 3/8" MPT
Shaft Size: 3/4"
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 2500

High strength forged brass manifold for long term use Three 10mm grade 8.8 bolts Ceramic coated stainless steel pistons for longer life in harsh environments Angular contact ball bearings stabilizes the cranshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life. All are made of heat treated steel for extended life. Stainless steel valves, seats, and springs with specially designed ultra form cages to provide extra long life and positive seating Continuously lubricating seals and v-packings for extended life Built-in unloader to optimize performance while reducing setup time. Integral trap pressure, fixed or adjustable chemical injector. SPECIAL NOTE: Use synthetic oil only. (part#6601). DO NOT change oil. Ue oil only to add if low. This oil is specially formulated synthetic oil with special additives for the demands ov the XJ pump series. No other oil is factory approved for this pump, and could result in pump failure. Maximum pump speed: 3400 RPM Stroke: 5.8mm Maximum fluid temperature: 140° F Crancase oil capacity: 4.5 oz.
Fits Model
AR PUMPS : SJV2.5G27D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $376.22
$282.17
You Save $94.05
(25% Off)
 
No Sales Tax, except in MD
Qty:


3/4" Hi-Grade Consumer Replacement Pump

Part Number: 5423
 
Specs
Inlet: 3/4" FGH
Gallons Per Minute: 2.75
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 12 lbs
Equipment Type: Pressure Washer
PSI: 2000

Commercial Duty Radial-Axial pumps Built-in Uniflow Unloader and chemical injector with inner stainless steel parts Abrasion proof, heat resistant, industrial ceramic plungers Stainless steel unitized check valves Forged Brass Manifold Industrial duty construction for extended life Patent registered ball bearing design Built-in garden hose adapter Double sealing buna textile V-packing Maximum Pump Speed: 3400 RPM Ceramic Plungers Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection. Axial Shafts Pumps
Fits Model
COMET : AXD3020G

Replaces OEM
Universal : Comet : 6501.0005.00
On Sale!

Reg. Price: $373.34
$280.01
You Save $93.33
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6044
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" MPT
Gallons Per Minute: 2.5
Bore: .591" (15mm)
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 2700

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a built-in pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Maximum pump speed: 3400 RPM Stroke: 5.8mm Maximum fluid temperature: 140 F Crancase oil capacity: 4.5 oz.
Fits Model
AR PUMPS : SJV25G27D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $392.04
$294.03
You Save $98.01
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 6663
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" MPT
Gallons Per Minute: 3.0
Bore: .591" (15mm)
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 2500

Stroke: 6.8mm Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Maximum pump speed: 3400 RPM Horsepower: 6.5 HP Bore: 15mm If Using a Screw Connect Style Hose Connection You May Need The 22 X 14mm Adapter Shown on the Right
Fits Model
AR PUMPS : SJV3G27D
BRIGGS AND STRATTON : 188850DGS, 190182GS, 190183GS, 193087GS, 194003GS, B4148EGS

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $408.76
$306.57
You Save $102.19
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" BXD Gas Flange Hollow Shaft Pump

Part Number: 6905
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 15 lbs
Equipment Type: Pressure Washer
PSI: 2500

Commercial Pump Built-in uniflow unloader and chemical injector Built-in easy start Stainless steel plungers Steel shaft with built-in key One oil cap for travel and operation Stainless steel check valves Forged brass manifold Patent registered ball bearing design Maximum speed: 3450 RPM
Fits Model
COMET : BXD3025G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $271.42
$203.57
You Save $67.85
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" AXD Gas Flange Hollow Shaft Pump With Built In Unloader

Part Number: 6139
 
Specs
Type: Axial Shafts Pump
Inlet: 3/4" FGH
Gallons Per Minute: 2.4
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 14 lbs
Equipment Type: Pressure Washer
PSI: 2400

Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600 Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. COMMERCIAL DUTY RADIAL-AXIAL PUMP Built-in Uniflow Unloader and chemical injector with inner stainless steel parts Abrasion proof, heat resistant, industrial ceramic plungers Stainless steel unitized check valves Forged brass manifold Industrial duty construction for extended life Patent registered ball bearing design Built-in garden hose adapter Double sealing buna textile V-packing RPM: 3400 maximum Piston: 14mm Includes: Comet Pump AXD2524G
Fits Model
COMET : AXD2524G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $368.14
$276.11
You Save $92.03
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" BXD Gas Flange Hollow Shaft Pump With VR54 Unloader

Part Number: 6523
 
Specs
Type: Axial Shafts Pump
Inlet: 1/2" FPT
Gallons Per Minute: 2.4
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 15 lbs
Equipment Type: Pressure Washer
PSI: 2700

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600 COMMERCIAL PUMP Built-in easy start Stainless steel plungers Built-in uniflow unloader and chemical injector Steel shaft with built-in key One oil cap for travel and operation Stainless steel check valves Forged brass manifold Patent registered ball bearing design Crankcase capacity: 4 oz. Steel Shaft with Built In Key Industrial Duty Construction for Extended Life
Fits Model
COMET : BXD2527G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $271.42
$203.57
You Save $67.85
(25% Off)
 
No Sales Tax, except in MD
Qty: