Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Pumps Made Ready

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 15 Items Sort by  Result's per page
 


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 2992
 
Specs
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Stroke: .374" (9.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: Fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change the oil afte 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Flanged For Mounting on Up To 13 Horsepower Engines Maximum Inlet Pressure 125 PSI Gas Flange Pumps
Fits Model
GENERAL PUMP : EZ3040G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3000
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20.3 lbs
Equipment Type: Pressure Washer
PSI: 3500

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankcase for easy right or left hand mounting Solid brass manifolds Hardened stainless steel piston guides Highly efficient stainless steel check valves Solid ceramic plungers High and low pressure seals: high quality buna-textile packings Additional anti-extrusion ring under the seal Special forged brass oversized connecting rods Die cast anodized aluminum crankcase High quality ball bearings Optimal oil bath for high speed operation Maximum Pump speed: 3400 RPM Minimum Horsepower Requirements: 12.75 hp for gas engines Crankcase Capacity: 18 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break in period, then in 500 hour intervals thereafter.
Fits Model
COMET : FWD4035G-VRT3-310EZ

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $793.60
$595.20
You Save $198.40
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3631
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" X 6.5"
Gallons Per Minute: 4.6
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 19.1 lbs
Equipment Type: Pressure Washer
PSI: 3000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Maximum Pump Speed: 3400 RPM Maximum Inlet Pressure: 125 PSI Stroke: 11mm (.433") Crankcase Oil Capacity: 14.0 oz. Maximum Fluid temperature: 165° F Flanged for Direct Couple to Gasoline Engines Flanged for Mounting on up to 13 Horsepower Engines
Fits Model
GENERAL PUMP : EZ3045G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3696
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 10.8 hp for gas engines Stroke: .295" (7.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondtergent SAE 30W oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-310EZ
Fits Model
GENERAL PUMP : EZ3035G-VRT3-250

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5067
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 17.5 lbs
Equipment Type: Pressure Washer
PSI: 3500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 13 hp for gas engines Crankcase Capacity: 14 oz. use SAE 20W/30 oil Piston: 15mm Unloader: VRT3-310EZ Your Unloader and Pressure Relief Valve May Need to Be Adjusted Prior to Useage
Fits Model
COMET : ZWD4035G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $527.36
$395.52
You Save $131.84
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5321
 
Specs
Type:
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Gallons Per Minute: 5.5
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive with Gas Flange Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirement: 9.3 hp for gas engines Lubrication: use 20W-30 oil. Change oil after 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VRT3-310EZ High Strength Forged Brass Manifold for Long Term Use Eight 6mm Bolts A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : XMV3G30D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $550.36
$412.77
You Save $137.59
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6133
 
Specs
Temperature: Gas Flange Pumps
Inlet: 1/2" FPT
Size: 8.4" x 8.4" x 6.5"
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. SAE J609 flange for direct couple to gasoline engines Set screw for key way Oversized bearings Longer life low and high pressure seals Forged brass manifold with exclusive lifetime warranty Horsepower: 12.3 GHP Maximum Pump Speed: 3400 RPM Stroke: 10mm Crankcase Oil Capacity: 14 oz. Maximum Fluid Temperature: 165° F Unloader: VRT3-310EZ
Fits Model
GENERAL PUMP : TX1510G8

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $624.00
$468.00
You Save $156.00
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6143
 
Specs
Type: Gas Flange Pumps
Inlet: 1/2" FPT
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 4000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 11.05 GHP Maximum pump speed: 3400 RPM Stroke: 8.2 mm Maximum fluid temperature: 140° F Crankcase oil capacity: 14.6 oz Crankshaft ID stamp: 8 A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience High Strength Forged Brass Manifold for Long Term Use Eight 6mm Bolts A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : SXMV3G40D

Replaces OEM
Universal :
On Sale!

Reg. Price: $626.62
$469.97
You Save $156.65
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6163
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 4.0
Bore: .512" (13mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Maximum Pump Speed: 3400 RPM Stroke: 13mm Crankcase Oil Capacity: 14 oz Maximum Fluid Temperature: 165° F
Fits Model
GENERAL PUMP : EZ4040G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $587.06
$440.30
You Save $146.76
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6259
 
Specs
Type: Gas Flange Pumps
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader AL607EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 11.05 GHP Maximum pump speed: 3400 RPM Stroke: 8.2 mm Maximum fluid temperature: 140° F Crankcase oil capacity: 14.6 oz Crankshaft ID stamp: 8
Fits Model
AR PUMPS : SMXV4G40D

Replaces OEM
Universal :
On Sale!

Reg. Price: $620.78
$465.59
You Save $155.19
(25% Off)
 
No Sales Tax, except in MD
Qty: