Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


PRESSURE WASHER PUMPS MADE READY

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 4 Items Sort by  Result's per page
 


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2968
 
Specs
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankshaft for easy right or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings Design for optimal operating temperature High quality oversized bearings Die-cast anodized aluminum chrankshaft fin Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 6.0 hp for gas engines Crankcae Capacity: 9.87 oz use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VR54 Built In Uniflow Unloader and Adjustable Chemical Injector Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection. Gas Flange Pumps
Fits Model
COMET : LWD3025G

Replaces OEM
Universal : Comet : 6303.0754.00
On Sale!

Reg. Price: $415.00
$311.25
You Save $103.75
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 2992
 
Specs
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Stroke: .374" (9.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: Fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change the oil afte 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Flanged For Mounting on Up To 13 Horsepower Engines Maximum Inlet Pressure 125 PSI Gas Flange Pumps
Fits Model
GENERAL PUMP : EZ3040G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3696
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 3000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-250 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Direct Drive with Gas Flange Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 10.8 hp for gas engines Stroke: .295" (7.5mm) Crankcase Capacity: 14 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondtergent SAE 30W oil. Change the oil after a 40 break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-310EZ
Fits Model
GENERAL PUMP : EZ3035G-VRT3-250

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $673.56
$505.17
You Save $168.39
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6163
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 4.0
Bore: .512" (13mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Maximum Pump Speed: 3400 RPM Stroke: 13mm Crankcase Oil Capacity: 14 oz Maximum Fluid Temperature: 165° F
Fits Model
GENERAL PUMP : EZ4040G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $587.06
$440.30
You Save $146.76
(25% Off)
 
No Sales Tax, except in MD
Qty: