Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Pumps Made Ready

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 12 Items Sort by  Result's per page
 


3/4" Hi-Grade Consumer Replacement Pump

Part Number: 5423
 
Specs
Inlet: 3/4" FGH
Gallons Per Minute: 2.75
Outlet: 3/8" MPT
Flange: Gas Engine Flange
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 12 lbs
Equipment Type: Pressure Washer
PSI: 2000

Commercial Duty Radial-Axial pumps Built-in Uniflow Unloader and chemical injector with inner stainless steel parts Abrasion proof, heat resistant, industrial ceramic plungers Stainless steel unitized check valves Forged Brass Manifold Industrial duty construction for extended life Patent registered ball bearing design Built-in garden hose adapter Double sealing buna textile V-packing Maximum Pump Speed: 3400 RPM Ceramic Plungers Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection. Axial Shafts Pumps
Fits Model
COMET : AXD3020G

Replaces OEM
Universal : Comet : 6501.0005.00
On Sale!

Reg. Price: $373.34
$280.01
You Save $93.33
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2922
 
Specs
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 2.85
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Gas Flange Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 5.9 hp for gas engine Stroke: .260" (6.6mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-160 Gas Flange Pumps
Fits Model
GENERAL PUMP : TT2028GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $554.86
$416.15
You Save $138.71
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 2968
 
Specs
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankshaft for easy right or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings Design for optimal operating temperature High quality oversized bearings Die-cast anodized aluminum chrankshaft fin Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 6.0 hp for gas engines Crankcae Capacity: 9.87 oz use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VR54 Built In Uniflow Unloader and Adjustable Chemical Injector Pump Manufacturers Recommend Replacing Pump Crankcase Oil After An Initial 50 Hour Break In Period. Following the Intial Break In Period the Oil Should be Replaced Every 3 Months or 500 Hours Whichever Comed First. the Pump Oil Level Should Be Part of Your Daily Inspection. Gas Flange Pumps
Fits Model
COMET : LWD3025G

Replaces OEM
Universal : Comet : 6303.0754.00
On Sale!

Reg. Price: $415.00
$311.25
You Save $103.75
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 3119
 
Specs
Gallons Per Minute: 2.1
Shaft Size: Hollow 5/8" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankshaft for easy righ or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings High quality oversized bearings Design for optimal operating temperature Die-cast anodized aluminum chrankshaft fin LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting. Minimum Horsepower Requirements: 3.0 bhp Crankcase Capacity: 9.87 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: VRT-160 Electric Flange Pumps
Fits Model
COMET : LWD2020E

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4769
 
Specs
Type: Electric Flange Pump
Gallons Per Minute: 2.2
Shaft Size: Hollow 5/8" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankshaft for easy righ or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings High quality oversized bearings Design for optimal operating temperature Die-cast anodized aluminum chrankshaft fin LWS Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting. Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 3.0 bhp Crankcase Capacity: 11 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter VRT3-160
Fits Model
COMET : LWS2020E

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $420.06
$315.05
You Save $105.01
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 4924
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-160 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Pump Maximum Inlet Pressure: 125 PSI Minimum Horsepower Requirements: 5.3 hp for gas engine Stroke: .315" (8mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VRT3-160 Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With an Exclusive Lifetime Warranty
Fits Model
GENERAL PUMP : TT2035GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $555.72
$416.79
You Save $138.93
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 5/8" Electric Flange Hollow Shaft Pump

Part Number: 4962
 
Specs
Type: Electric Flange Pump
Gallons Per Minute: 2.0
Shaft Size: Hollow 5/8" ID
Weight: 19 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankshaft for easy righ or left hand mounting Forged bronze connecting rods with lifetime warranty Hardened stainless steel piston guides High efficiency stainless steel check valves Abrasion proof, heat resistant, industrial ceramic plungers High quality buna-textile double sealing v-packings High quality oversized bearings Design for optimal operating temperature Die-cast anodized aluminum chrankshaft fin LWD Series pumps feature anodized, die cast aluminum crankcase, solid ceramic plungers, stainless steel check valves and piston guides and BUNA-textile V-packings. They have a 5/8" hollow shaft with a NEMA 56C flange and a reversible crankcase for easy right hand or left hand mounting. Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 3.0 bhp Crankcase Capacity: 11 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break-in period, then in 500 hour intervals thereafter. Unloader: MV540
Fits Model
COMET : LWS2020E

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $408.68
$306.51
You Save $102.17
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 5/8" Axial Commerical Duty Electric Flange Hollow Shaft Pump With Built In Unloader

Part Number: 5130
 
Specs
Type: Axial Shafts Pump
Gallons Per Minute: 2.0
Shaft Size: Hollow 5/8" ID
Weight: 14 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a built-in adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Pumps Made Ready Are Not Tested Prior To Shipping. Your unloader and Pressure Relief Valve May Need Adjusting Before Usage. Testing Is Available on 3400 RPM Pumps Made Reasdy. Use Part Number 6600 COMMERCIAL DUTY RADIAL-AXIAL PUMP Built-in Uniflow Unloader and chemical injector with inner stainless steel parts Abrasion proof, heat resistant, industrial ceramic plungers Stainless steel unitized check valves Forged brass manifold Industrial duty construction for extended life Patent registered ball bearing design Built-in garden hose adapter Double sealing buna textile V-packing Includes: Comet Pump AXD2020E Maximum Pump Speed: 3400 RPM
Fits Model
COMET : AXD2020E

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $366.68
$275.01
You Save $91.67
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump

Part Number: 5833
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 2.85
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 17 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VB3K adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Direct Drive Gas Flange Maximum Inlet Pressure: 125 PSI Minimum Horsepower Requirements: 5.9 hp for gas engine Stroke: .260" (6.6mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Lubrication: Fill the crankcase to oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VB3KTT Gasoline Engines Ideal For All General Cleaning Applications. Forged Brass Manifold With An Exclusive Lifetime Warranty. Maximum Fluid Temperature: 165° F
Fits Model
GENERAL PUMP : TT2028GBF

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $532.98
$399.74
You Save $133.24
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 3/4" Gas Flange Hollow Shaft Pump With Built In Unloader

Part Number: 5930
 
Specs
Type: Gas Flange Pump
Inlet: 3/8" FPT
Size: 7.0" x 7.2" x 5.5"
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 1/4" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 3/4" ID
Weight: 18 lbs
Equipment Type: Pressure Washer
PSI: 2000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor. This pump made ready consists of the pump, a VR54 adjustable pressure actuated unloader with a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Forged brass manifold with exclusive lifetime warranty Die cast, anodized aluminum, oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized, stainless steel, kit 1 inlet and outlet valves Ideal for all general cleaning, RO, and misting applications Comes standard with NEMA 56C electric motor mounting flange Also available in "L" left handed version Direct Drive Pump Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 5.3 hp for gas engine Stroke: .315" (8mm) Crankcase Capacity: 11.2 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Unloader: VR54
Fits Model
GENERAL PUMP : VR54

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $539.44
$404.58
You Save $134.86
(25% Off)
 
No Sales Tax, except in MD
Qty: