Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Pumps Made Ready

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 5 Items Sort by  Result's per page
 


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 3000
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20.3 lbs
Equipment Type: Pressure Washer
PSI: 3500

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Reversible crankcase for easy right or left hand mounting Solid brass manifolds Hardened stainless steel piston guides Highly efficient stainless steel check valves Solid ceramic plungers High and low pressure seals: high quality buna-textile packings Additional anti-extrusion ring under the seal Special forged brass oversized connecting rods Die cast anodized aluminum crankcase High quality ball bearings Optimal oil bath for high speed operation Maximum Pump speed: 3400 RPM Minimum Horsepower Requirements: 12.75 hp for gas engines Crankcase Capacity: 18 oz. use SAE 20W/30 oil Lubrication: fill crankcase with SAE 20W/30 oil per pump specifications. Change oil after initial 50 hour break in period, then in 500 hour intervals thereafter.
Fits Model
COMET : FWD4035G-VRT3-310EZ

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $793.60
$595.20
You Save $198.40
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 4418
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 12.2" x 9.2" x 6.9"
Gallons Per Minute: 5.6
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: .945" (24mm)
Weight: 32 lbs
Equipment Type: Pressure Washer
PSI: 3500

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor or gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, athermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Maximum Pump Speed: 1125/1450 RPM Minimum Horsepower Requirements: 11.5 bhp (17.3 hp for gas engines) Stroke: .630" (16mm) Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter
Fits Model
GENERAL PUMP : TS2021NP

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $931.86
$698.90
You Save $232.96
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 5067
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 17.5 lbs
Equipment Type: Pressure Washer
PSI: 3500

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 13 hp for gas engines Crankcase Capacity: 14 oz. use SAE 20W/30 oil Piston: 15mm Unloader: VRT3-310EZ Your Unloader and Pressure Relief Valve May Need to Be Adjusted Prior to Useage
Fits Model
COMET : ZWD4035G

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $527.36
$395.52
You Save $131.84
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 6665
 
Specs
Type: Solid Shaft Pumps
Inlet: 1/2" FPT
Size: 12.2" x 9.2" 6.9"
Gallons Per Minute: 4.0
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: .945" (24mm)
Weight: 32 lbs
Equipment Type: Pressure Washer
PSI: 3500

Unloader: BP9EZ Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1450 RPM Minimum Horsepower Requirements: 6.8 bhp (10.3 hp for gas engines) Stroke: .472" (12mm) Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: Fill crancase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : TS1511-BP9EZ

Replaces OEM
Universal :
On Sale!

Reg. Price: $996.30
$747.23
You Save $249.07
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 6680
 
Specs
Type: Solid Shaft Pump
Gallons Per Minute: 4.0
Shaft Size: .945" (24mm)
Weight: 41 lbs
Equipment Type: Pressure Washer
PSI: 3500

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your electric motor or gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Manifold with fine thread valve caps The preferred pump frame in the pressure cleaning industry Forged brass manifold with an exclusive lifetime warranty Large capacity, die-cast , anodized aluminum oil-bath crankcase Over-sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Designed for suction applications
Fits Model
GENERAL PUMP : TSS1511

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $839.60
$629.70
You Save $209.90
(25% Off)
 
No Sales Tax, except in MD
Qty: