Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


PRESSURE WASHER PUMPS MADE READY

Pressure Washer Pumps Made Ready: Jack’s is your place! We have the Pressure Washer Pumps Made Ready you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Featured: 8 Items Sort by  Result's per page
 


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6143
 
Specs
Type: Gas Flange Pumps
Inlet: 1/2" FPT
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 4000

Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 11.05 GHP Maximum pump speed: 3400 RPM Stroke: 8.2 mm Maximum fluid temperature: 140° F Crankcase oil capacity: 14.6 oz Crankshaft ID stamp: 8 A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience High Strength Forged Brass Manifold for Long Term Use Eight 6mm Bolts A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : SXMV3G40D

Replaces OEM
Universal :
On Sale!

Reg. Price: $626.62
$469.97
You Save $156.65
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6163
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Size: 8.8" x 9.7" x 6.5"
Gallons Per Minute: 4.0
Bore: .512" (13mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version Maximum Pump Speed: 3400 RPM Stroke: 13mm Crankcase Oil Capacity: 14 oz Maximum Fluid Temperature: 165° F
Fits Model
GENERAL PUMP : EZ4040G

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $587.06
$440.30
You Save $146.76
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6259
 
Specs
Type: Gas Flange Pumps
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader AL607EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 11.05 GHP Maximum pump speed: 3400 RPM Stroke: 8.2 mm Maximum fluid temperature: 140° F Crankcase oil capacity: 14.6 oz Crankshaft ID stamp: 8
Fits Model
AR PUMPS : SMXV4G40D

Replaces OEM
Universal :
On Sale!

Reg. Price: $620.78
$465.59
You Save $155.19
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6268
 
Specs
Type: Gas Flange Pumps
Inlet: 1/2" FPT
Gallons Per Minute: 3.5
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 16 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: AL607EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRt3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 11.05 GHP Maximum pump speed: 3400 RPM Stroke: 8.2 mm Maximum fluid temperature: 140° F Crankcase oil capacity: 14.6 oz Crankshaft ID stamp: 8 High Strength Forged Brass Manifold for Long Term Use Eight 6mm Grade 12.9 Bolts A Special Thick Solid Ceramic Plunger For Long Life, Strong Durability and More Resilience Precision Die Cast Crankcase with Large Cooling Fins and Anodized for Maximum Heat Dissipation. Sight Glass, fill and Side and Bottom Drain Plugs. Oversized Bearings for Maximum Life and Load Disbursement, Needle Bearing on the Drive Side and Ball On the Non-Drive Side. Each Bearing is Held In Position on the Crankshaft and Crankcase by Snap Rings. This Assures Positive Alignment and Centering of the Connecting Rods and Crankshaft in Relation to the Crankcase, it Also Eliminates the Crankshaft From Floating. Stainless Steel Valves Seats and Springs with Specially Designed Ultra Form Material Valve Cages That Are Impervious to Water Absorption and Provide Long Life and Positive Seating Continuously Lubricating Seals and V-Packing for Extended Life High Strength Stainless Steel Plunger Rods One Piece Special Alloy Aluminum Based Connecting Rods. Oversized for Maximum Strength, Load Disbursement and Long Life. Heavt Pin Area Construction for Added Load Strength.
Fits Model
AR PUMPS : SXMV3.5G40D

Replaces OEM
Universal :
On Sale!

Reg. Price: $626.62
$469.97
You Save $156.65
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6343
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .708" (18mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 21 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 14.3 GHP Maximum pump speed: 3400 RPM Stroke: 7.0 mm Maximum fluid temperature: 140° F Crankcase oil capacity: 15 oz Crankshaft ID stamp: 8 Nickel Plated Forged Brass Manifold For Strength and No Porosity. Long Life and Higher Hydrostatic Pressure Safety and Performance. Inlet and Discharge Ports, Heavy Bosses for Added Strength. Offset Discharge Ports. High Efficiency Smooth Flow. Eight 8mm Grade 8.8 Bolts Valves: - Machined brass . - Ultra Form Cages: Durable, strength, and long life. - Poppets, Seat and Spring: 303 and 400 series stainless steel. Packing and Plungers: - High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load. - Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat. Support and Guides: Machined brass, 1-piece construction to assure proper plunger alignment and to maximize packing and seal life. - Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient. Bearings: Oversized tapered roller bearing for maximum life and load disbursement. Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation). Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen) Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system. Rod Pins: Precision ground and hardened steel, oversized for load disbursement. Connecting Rods: One-piece special allow aluminum or bronze for higher pressure, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength. Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Oil Seals and O-rings: Triple lip oil seals, long life and much less leak prone. All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface. Oil Drains: Quantity of two (2). One in the rear cover and one in the bottom of the crankcase. Oil Capacity: 15.5 oz. Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design. Valve Design: Each pump series has a valve design that optimizes its highest efficiency
Fits Model
AR PUMPS : RKV4G40HD

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $789.66
$592.25
You Save $197.41
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6553
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .591" (15mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 17 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods Maximum pump speed: 3400 RPM Crankcase oil capacity: 11 oz.
Fits Model
COMET : ZWD4040G

Replaces OEM
Universal : Comet : 6305.0900.00
On Sale!

Reg. Price: $539.90
$404.93
You Save $134.97
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 24mm Solid Shaft Pump

Part Number: 5554
 
Specs
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Outlet: 3/8" FPT
Shaft Size: .945" (24mm)
Weight: 27 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Crankcase: die-cast aluminum alloy for protection against corrosion Piston guides are heat treated stainless steel Highly efficient stainless steel check valves Solid ceramic plungers Brass manifold, forged for maximum strength and longer life up to 4000 PSI One piece solid bronze alloy connection rods Oil cap: new travel/working oil cap High quality tapered roller bearings Large oil capacity dissipates heat and improves lubrication for longer life Long life seals 1450 RPM maximum 165° F Maximum Temperature Oil capacity: 25 oz.
Fits Model
COMET : RW4040S

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $780.00
$585.00
You Save $195.00
(25% Off)
 
No Sales Tax, except in MD
Qty:


Pumps Made Ready 1" Gas Flange Hollow Shaft Pump

Part Number: 6589
 
Specs
Type: Gas Flange Pump
Inlet: 1/2" FPT
Gallons Per Minute: 4.0
Bore: .708" (18mm)
Outlet: 3/8" FPT
Flange: Gas Engine Flange
Shaft Size: Hollow 1" ID
Weight: 21 lbs
Equipment Type: Pressure Washer
PSI: 4000

Unloader: VRT3-310EZ Easily replace your old pump with a pump made ready. Simply remove your old pump and slide this pmr onto the shaft of your gas engine. This pump made ready consists of the pump, a VRT3-310EZ adjustable pressure actuated unloader with a built-in easy start valve, a thermal relief valve to help prevent overheating, along with an inlet filter. All fittings are quick connected. Horsepower: 14.3 GHP Maximum pump speed: 3400 RPM Stroke: 7.0 mm VRT3-310EZ adjustable unloader with built in easy start valve Maximum fluid temperature: 140° F Crankcase oil capacity: 15 oz Crankshaft ID stamp: 8 High Strength Forged Brass Manifold for Long Term Use Eight 6mm Bolts New Ceramic Plungers, Thicker Wall To Help Prevent Thermal Shock Forged Precision Ground Crankcase Stainless Steel Valves Valve Seat O-Ring is Side Mounted High Quality High Pressure Seals. New Low Pressure Seal With Built In Scraper Two Piece Piston Guides New Connecting Rod With 12% More Load Surface. Large Side Cover Sight Glass, Over Sized Bearing, Rear Cover Oil Drain
Fits Model
AR PUMPS : RRV4G40D

Replaces OEM
Universal : AR Pumps :
On Sale!

Reg. Price: $491.00
$368.25
You Save $122.75
(25% Off)
 
No Sales Tax, except in MD
Qty: