Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Burners Parts And Ancillaries

Pressure Washer Burners Parts And Ancillaries: Jack’s is your place! We have the Pressure Washer Burners Parts And Ancillaries you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Popular Pressure Washer Burners Parts And Ancillaries  

 


Universal Thermocouple

Part Number: 4955
 
Specs
Size: 18"
Width: 4"
Height: 6"
Length: 1"
Material: Copper
Weight: .14lbs
Equipment Type: Pressure Washer

Universal replacement gas pilot light controls Use in furnaces, boilers & space heaters Also for use in water heaters Includes adapter fittings
Fits Model

Replaces OEM
Universal :
Your Price:
$9.99
 
No Sales Tax, except in MD
Qty:


Pilot Module Furnace Ignition Control

Part Number: 4956
 
Specs
Equipment Type: Pressure Washer

One or Two Rod Intermittent Pilot Control with continuous retry trial time with configurable lockout timing of 15 or 90 seconds and configurable prepurge of 30 seconds or no prepurge Provides ignition sequence, flame monitoring and safety shutoff for intermittent pilot central furnaces and heating appliances. Provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated. Ignition trial/delay sequence is repeated until the appliance lights or call for heat is removed. For use with Natural or LP gas. For use in single rod or dual rod/remote sense applications. Includes relay contacts for use with any intermittent pilot gas control string with maximum 1.0A pilot or 2.0A main valve rating; Honeywell VR8204, VR8304 or VR8345M combination gas control recommended. Functional equivalent of S86, S8600, S8610 and S90 modules. Includes spark cable adapters to allow field replacement of both Honeywell and competitive controls without replacing existing spark cable.
Fits Model

Replaces OEM
Universal : S8600M
On Sale!

Reg. Price: $184.78
$138.59
You Save $46.19
(25% Off)
 
No Sales Tax, except in MD
Qty:


24V 3/4" X 3/4" Universal Combination Straight Thru Gas Valve

Part Number: 4957
 
Specs
Volt: 24 Volt
Equipment Type: Pressure Washer

Natural or LP gas Operating Temperature: -40° to 175° Max. Pressure Rating 1 4” W.C. (1/2 PSI) max. 50/60 Hz, Single Stage .41 Amps, Two Stage .54 Amps Direct Spark, & Hot Surface Applications Includes LP Kit And Reducer Bushings 300,000 BTU.
Fits Model

Replaces OEM
Universal : 36H32-423
On Sale!

Reg. Price: $209.00
$156.75
You Save $52.25
(25% Off)
 
No Sales Tax, except in MD
Qty:


32 Nozzle Cast Iron Burner Ring

Part Number: 6674
 
Specs
Orifice: 69
Material: Cast Iron
Equipment Type: Pressure Washer

High Flow Design Industry Standard Sizes 1/8" FPT Rings Sold With 69 Size Orifice, the Smallest Size. Nozzles Can Be Drilled to Larger Size
Fits Model

Replaces OEM
Universal :
On Sale!

Reg. Price: $167.24
$125.43
You Save $41.81
(25% Off)
 
No Sales Tax, except in MD
Qty:


44 Nozzle Cast Iron Burner Ring

Part Number: 6675
 
Specs
Orifice: 69
Material: Cast Iron
Equipment Type: Pressure Washer

High Flow Design Industry Standard Sizes 1/8" FPT Rings Sold With 69 Size Orifice, the Smallest Size. Nozzles Can Be Drilled to Larger Size
Fits Model

Replaces OEM
Universal :
On Sale!

Reg. Price: $239.98
$179.99
You Save $59.99
(25% Off)
 
No Sales Tax, except in MD
Qty:


66 Nozzle Cast Iron Burner Ring

Part Number: 6676
 
Specs
Orifice: 69
Material: Cast Iron
Equipment Type: Pressure Washer

High Flow Design Industry Standard Sizes 1/8" FPT Rings Sold With 69 Size Orifice, the Smallest Size. Nozzles Can Be Drilled to Larger Size
Fits Model

Replaces OEM
Universal :
On Sale!

Reg. Price: $322.76
$242.07
You Save $80.69
(25% Off)
 
No Sales Tax, except in MD
Qty:


1/5HP Non Capacitor Burner Motor

Part Number: 1214
 
Specs
Volt: 115V
Equipment Type: Pressure Washer

60hz 1/5 HP 48N Frame Burner motors may display an RPM of 2850 and 50Hz. This is the European equivalent of 3450 RPM and 60Hz. The motor will run at 3450 RPM. Burner motors are utilized to power the air blower and fuel pump in the burner assembly.
Fits Model

Replaces OEM
Universal :
Your Price:
$129.98
 
No Sales Tax, except in MD
Qty:


115 Volt Suntec Solenoid Valve

Part Number: 1215
 
Specs
Temperature: Ambient temps not to exceed 115°F (46°C).
Includes: Coil, Tube Assembly, Pigtail, Valve Block, Base, Nozzle Screws
Equipment Type: Pressure Washer

Shut-off valve which provides instantaneous fuel supply cutoff back up protection in fuel oil circuits. Wired in parallel with the burner motor, the valve closes whenever current to the motor is interrupted, blocking oil flow to the nozzle. Mounts directly to the fuel pump. UL recognized and CSA certified. For use with #2 and lignter fuel at maximum fluid temp of 75°F. (24°C)
Fits Model
SUNTEC : Model A & B pumps up to 300 PSI

Replaces OEM
Universal : Suntec :
Your Price:
$51.68
 
No Sales Tax, except in MD
Qty:


8" Oil Line Assembly

Part Number: 1222
 
Specs
Length: 8"
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Wayne : 14452
Your Price:
$5.68
 
No Sales Tax, except in MD
Qty:


60A Red 1 GPH Hollow Cone Nozzle

Part Number: 1314
 
Specs
Size: 60 A/H
Equipment Type: Pressure Washer

1 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration Rolled Threads to Avoid Chips and Burrs Sintered Filter for Maximum Protection: Sized Depending on Flow ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60A Red 1.20 GPH Hollow Cone Nozzle

Part Number: 1315
 
Specs
Size: 60 A/H
Equipment Type: Pressure Washer

1.20 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration Rolled Threads to Avoid Chips and Burrs Sintered Filter for Maximum Protection: Sized Depending on Flow. ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60A Red 1.35 GPH Hollow Cone Nozzle

Part Number: 1316
 
Specs
Size: 60 A/H
Equipment Type: Pressure Washr

1.35 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration rolled threads to avoid chips and burrs sintered filter for maximum protection: sized depending on flow. ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60A Red 1.50 GPH Hollow Cone Nozzle

Part Number: 1317
 
Specs
Size: 60 A/H
Thread Size: 9/16" x 24
Equipment Type: Pressure Washer

1.50 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Equipped with 120 mesh strainer Mesh screens are 304 stainless steel on brass support pieces Fabricated of a special high chrome, heat resistant grade of stainless steel Fits all popular oil burners
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60A Red 1.75 GPH Hollow Cone Nozzle

Part Number: 1318
 
Specs
Size: 60 A/H
Equipment Type: Pressure Washer

1.75 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Equipped with 120 mesh strainer Mesh screens are 304 stainless steel on brass support pieces Fabricated of a special high chrome, heat resistant grade of stainless steel Fits all popular oil burners Thread Size: 9/16" x 24
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60A Red 3.25 GPH Hollow Cone Nozzle

Part Number: 1319
 
Specs
Size: 60 A/H
Equipment Type: Pressure Washer

3.25 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration rolled threads to avoid chips and burrs Sintered filter for maximum protection: sized depending on flow. Mesh strainer supplied on 2.00 GPH and higher flow rates ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$10.77
 
No Sales Tax, except in MD
Qty:


60A Red 4 GPH Hollow Cone Nozzle

Part Number: 1320
 
Specs
Size: 60 A/H
Equipment Type: Pressure Washer

4 GPH Hollow cone type A nozzles are mainly used on burners with a hollow cone air pattern and for through puts up to 2.00 GPH. The droplet distribution is concentrated on the outside of the cone and results in good ignition and low noise combustion. Every nozzle is tested, then Delavan goes one step further and cleans the test oil from the nozzle to avoid plugging. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration rolled threads to avoid chips and burrs Sintered filter for maximum protection: sized depending on flow. Mesh strainer supplied on 2.00 GPH and higher flow rates ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$10.77
 
No Sales Tax, except in MD
Qty:


60B Blue 1 GPH Solid Cone Nozzle

Part Number: 1321
 
Specs
Size: 60 B
Equipment Type: Pressure Washer

1 GPH Solid Cone Type "B" nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. the spray pattern becomes progressively more hollow at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration Rolled Threads to Avoid Chips and Burrs Sintered Filter for Maximum Protection: Sized Depending on Flow ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60B Blue 1.20 GPH Solid Cone Nozzle

Part Number: 1322
 
Specs
Size: 60 B
Equipment Type: Pressure Washer

1.20 GPH Solid Cone Type "B" nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. the spray pattern becomes progressively more hollow at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration Rolled Threads to Avoid Chips and Burrs Sintered Filter for Maximum Protection: Sized Depending on Flow. ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60B Blue 1.25 GPH Solid Cone Nozzle

Part Number: 1323
 
Specs
Size: 60 B
Equipment Type: Pressure Washer

1.25 GPH Solid Cone Type "B" nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. the spray pattern becomes progressively more hollow at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration rolled threads to avoid chips and burrs sintered filter for maximum protection: sized depending on flow. ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty:


60B Blue 1.35 GPH Solid Cone Nozzle

Part Number: 1324
 
Specs
Size: 60 B
Equipment Type: Pressure Washer

1.35 GPH Solid Cone Type "B" nozzles produce a spray that distributes droplets fairly uniformly throughout the complete pattern. the spray pattern becomes progressively more hollow at higher flow rates, particularly above 8.00 GPH. Provides smooth ignition and efficient combustion, particularly in larger burners. Precise spray angles and optimal spray uniformity through new machining process Reduced distributor size with shorter tangential slots to avoid plugging Aerodynamic body configuration rolled threads to avoid chips and burrs sintered filter for maximum protection: sized depending on flow. ISO 9001 certified
Fits Model

Replaces OEM
Universal :
Your Price:
$6.84
 
No Sales Tax, except in MD
Qty: