Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Valves

Pressure Washer Valves: Jack’s is your place! We have the Pressure Washer Valves you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Popular Pressure Washer Valves  

 


Float Tank With Lid

Part Number: 1018
 
Specs
Size: 1 Gallon
Material: Plastic
Equipment Type: Pressure Washer

The float tank usually holds about 1 gallon of water. It will be replenished when the float valve drops below a certin level. The float tank should have a top and a discharge filter to prevent debris from entering the pressure washer system. If debris does clog the outlet preventing water from getting to the system, the vacuum switch can be defeated, and cause the burner to ignite without water flow, and a steam explosion may occur.
Fits Model

Replaces OEM
Universal :
Your Price:
$14.80
 
No Sales Tax, except in MD
Qty:


3/4" MPT Plastic Float Valve

Part Number: 1019
 
Specs
Temperature: 176°F Maximum
Inlet: 3/4" MPT
Equipment Type: Pressure Washer

Flow Rate: 6.6 to 8.0 GPM The float valve assembly is designed so the action of the float riding on the top of the rising water level in the float tank will physically shut off a valve and cut the water supply to the tank. When the water level falls, the valve reopens and water is again allowed to flow into the tank. The float valve assembly is generally made up of a male inlet fitting, an outlet which may or may not be threaded, and a short controlling arm on a pivot which creates the motion of the arm.
Fits Model

Replaces OEM
Universal :
Your Price:
$17.18
 
No Sales Tax, except in MD
Qty:


Float Valve Brass Rod

Part Number: 1547
 
Specs
Size: 1/4" 20 x 2"
Material: Brass
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal :
Your Price:
$1.90
 
No Sales Tax, except in MD
Qty:


Float Valve Brass Rod

Part Number: 1548
 
Specs
Size: 1/4" 20 x 8"
Material: Brass
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal :
Your Price:
$3.52
 
No Sales Tax, except in MD
Qty:


1/2" FPT ST-8 Plastic Float Valve

Part Number: 1712
 
Specs
Temperature: 176°F Maximum
Inlet: 1/2" FNPT
Gallons Per Minute: 5
Equipment Type: Pressure Washer
PSI: 140 PSI Maximum

Precision made for the use in high pressure washer systems. This float valve is used to regulate the maximum water level in a float tank. When the maximum water level drops the float valve opens. The valve housing, as well as the connection are manufactured of corrosion resistant material, brass and plastics
Fits Model

Replaces OEM
Universal : Suttner :
Your Price:
$23.62
 
No Sales Tax, except in MD
Qty:


1/2" MPT St-8 Float Valve Adapter

Part Number: 1721
 
Specs
Size: 1/2" MPT Adapter
Equipment Type: Pressure Washer


Fits Model

Replaces OEM
Universal : Suttner :
Your Price:
$6.23
 
No Sales Tax, except in MD
Qty:


3/8" FPT Stainless Steel Check Valve

Part Number: 1991
 
Specs
Temperature: 195° F Max
Inlet: 3/8" FPT
Gallons Per Minute: 10.5
Material: Stainless Steel
Equipment Type: Pressure Washer
PSI: 6500


Fits Model

Replaces OEM
Universal :
Your Price:
$33.97
 
No Sales Tax, except in MD
Qty:


1/4" FPT Low Pressure Brass Ball Valve

Part Number: 2141
 
Specs
Inlet: 1/4" FPT
Material: Brass
Material: Hard Chromium Plated Solid Ball
Equipment Type: Pressure Washer
PSI: 600 PSI Maximum

Full Port Forge constructed. Bottom entry, blow out proof stem.
Fits Model

Replaces OEM
Universal :
Your Price:
$7.35
 
No Sales Tax, except in MD
Qty:


3/8" FPT Low Pressure Brass Ball Valve

Part Number: 2142
 
Specs
Inlet: 3/8" FPT
Material: Brass
Material: Hard Chromium Plated Solid Ball
Equipment Type: Pressure Washer
PSI: 600 PSI Maximum

Full Port Forge constructed. Bottom entry, blow out proof stem.
Fits Model

Replaces OEM
Universal :
Your Price:
$7.85
 
No Sales Tax, except in MD
Qty:


1/2" FPT Low Pressure Brass Ball Valve

Part Number: 2143
 
Specs
Inlet: 1/2" FPT
Material: Brass
Material: Hard Chromium Plated Solid Ball
Equipment Type: Pressure Washer
PSI: 600 PSI Maximum

Full Port Forge constructed. Bottom entry, blow out proof stem
Fits Model

Replaces OEM
Universal :
Your Price:
$9.12
 
No Sales Tax, except in MD
Qty:


3/4" FPT Low Pressure Brass Ball Valve

Part Number: 2144
 
Specs
Inlet: 3/4" FPT
Material: Brass
Material: Hard Chromium Plated Solid Ball
Equipment Type: Pressure Washer
PSI: 600 PSI Maximum

Full Port Forge constructed. Bottom entry, blow out proof stem
Fits Model

Replaces OEM
Universal :
Your Price:
$13.17
 
No Sales Tax, except in MD
Qty:


Adams 1/4" FPT Brass Check Valve

Part Number: 2327
 
Specs
Temperature: 200°F
Inlet: 1/4" FPT
Material: Brass
Material: Stainless Steel Spring
Equipment Type: Pressure Washer
PSI: 3000

O-ring poppet seal Check valves allow water to flow through the pump in one direction, and help control chemical flow. They can also be used as back flow preventers, and as inline check valves. Check valves may be included at a number of points in the system. There is a check valve in the chemical line foot, as well as a pressure actuated unloader.
Fits Model

Replaces OEM
Universal :
Your Price:
$26.24
 
No Sales Tax, except in MD
Qty:


Adams 3/8" FPT Brass Check Valve

Part Number: 2328
 
Specs
Temperature: 200°F
Inlet: 3/8" FPT
Material: Brass
Material: Stainless Steel Spring
Equipment Type: Pressure Washer
PSI: 3000

O-ring poppet seal Check valves allow water to flow through the pump in one direction, and help control chemical flow. They can also be used as back flow preventers, and as inline check valves. Check valves may be included at a number of points in the system. There is a check valve in the chemical line foot, as well as a pressure actuated unloader.
Fits Model

Replaces OEM
Universal :
Your Price:
$27.57
 
No Sales Tax, except in MD
Qty:


PA 3/8" MPT Brass Float Valve

Part Number: 2344
 
Specs
Inlet: 3/8" MPT
Outlet: 3/8" MPT
Material: Brass
Equipment Type: Pressure Washer

No Lock Nut and Gasket Positive Water Level Control Maximum Flow 7 GPM The float valve assembly is designed so the action of the float riding on the top of the rising water level in the float tank will physically shut off a valve and cut the water supply to the tank. When the water level falls, the valve reopens and water is again allowed to flow into the tank. The float valve assembly is generally made up of a male inlet fitting, an outlet which may or may not be threaded, and a short controlling arm on a pivot which creates the motion of the arm.
Fits Model

Replaces OEM
Universal : P.A. :
Your Price:
$25.04
 
No Sales Tax, except in MD
Qty:


PA 3/8" X 1/4" Easy Start Valve

Part Number: 2394
 
Specs
Inlet: 3/8" MPT
Gallons Per Minute: 8.0
Outlet: 1/4" Hose Barb
Equipment Type: Pressure Washer
PSI: 4500

The easy start valve allows relief of system pressure when starting a gasoline engine. The easy start valve is a low pressure bypass or relief valve, which directs water into bypass until a certain pressure is reached. Since water is directed to bypass in low pressure, the load on the pump, and consequently, the engine is less than the normal operating load and engine starting is eased. This valve can be especially useful in systems with larger gasoline engines, such as 8 hp or larger. The valve consists of an inlet fitting, a valve ball and spring, a valve seat, and an outlet fitting equipped with a low pressure hose barb. The inlet fitting has a hole drilled through it with a substantially smaller diameter than the inlet line.
Fits Model

Replaces OEM
Universal :
Your Price:
$21.51
 
No Sales Tax, except in MD
Qty:


1/4" FPT High Pressure Ball Valve

Part Number: 2517
 
Specs
Temperature: 190°F Maximum @ 4000 PSI
Material: Zinc Plated Steel
Equipment Type: Pressure Washer
PSI: 7400 PSI Maximum w/70° F Water
PSI: 4000 PSI Maximum w/190° F Water

Not To Be Used With Solvents Not Full Port
Fits Model

Replaces OEM
Universal :
Your Price:
$24.68
 
No Sales Tax, except in MD
Qty:


1/4" FPT Brass Check Valve

Part Number: 3447
 
Specs
Temperature: 180°F
Inlet: 1/4" FPT
Material: Brass
Material: Stainless Steel Spring
Equipment Type: Pressure Washer
PSI: 1200

O-ring poppet seal Check valves allow water to flow through the pump in one direction, and help control chemical flow. They can also be used as back flow preventers, and as inline check valves. Check valves may be included at a number of points in the system. There is a check valve in the chemical line foot, as well as a pressure actuated unloader.
Fits Model

Replaces OEM
Universal :
Your Price:
$11.69
 
No Sales Tax, except in MD
Qty:


3/8" FPT Brass Check Valve

Part Number: 3448
 
Specs
Temperature: 180°F
Inlet: 3/8" FPT
Material: Brass
Material: Stainless Steel Spring
Equipment Type: Pressure Washer
PSI: 1200

O-ring poppet seal Check valves allow water to flow through the pump in one direction, and help control chemical flow. They can also be used as back flow preventers, and as inline check valves. Check valves may be included at a number of points in the system. There is a check valve in the chemical line foot, as well as a pressure actuated unloader.
Fits Model

Replaces OEM
Universal :
Your Price:
$14.06
 
No Sales Tax, except in MD
Qty:


1/2" FPT Brass Check Valve

Part Number: 3449
 
Specs
Temperature: 180°F
Inlet: 1/2" FPT
Material: Brass
Material: Stainless Steel Spring
Equipment Type: Pressure Washer
PSI: 1200

O-ring poppet seal Check valves allow water to flow through the pump in one direction, and help control chemical flow. They can also be used as back flow preventers, and as inline check valves. Check valves may be included at a number of points in the system. There is a check valve in the chemical line foot, as well as a pressure actuated unloader.
Fits Model

Replaces OEM
Universal :
Your Price:
$18.49
 
No Sales Tax, except in MD
Qty:


Foot Actuated Valve

Part Number: 3473
 
Specs
Inlet: 3/8" FPT
Gallons Per Minute: 8
Outlet: 1/4" FPT
Equipment Type: Pressure Washer
PSI: 3000

May be used with a variety of accessories, Foot controlled so both hands are free to work, Inlet/outlet positioned to help keep hoses out of the way, Pedal and valve are in protective housing, Heavy gauge steel construction for durability and stability, Valve is easily repaired with standard kit, Excellent accessory for Sewer hose and nozzle operation
Fits Model

Replaces OEM
Universal : Suttner :
Your Price:
$104.03
 
No Sales Tax, except in MD
Qty: