Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!


Pressure Washer Pumps

Pressure Washer Pumps: Jack’s is your place! We have the Pressure Washer Pumps you need, with fast shipping and great prices. For Pressure Washer parts and accessories, think Jack’s!

Popular Pressure Washer Pumps  

 


1" Gas Flange Hollow Shaft Triplex Plunger Pump

Part Number: 6763
 
Specs
Type: Hollow Shaft Pump
Inlet: 1/2" FPT
Gallons Per Minute: 3.0
Outlet: 3/8" FPT
Shaft Size: 1"
Weight: 17 lbs
Equipment Type: Pressure Washer
PSI: 3500

Bolt-on unloader and injector Increased fin depth increases surface area to maximize heat dissipation Stainless steel unitized check valves Heat resistant solid ceramic plungers operating on lubricated packings Direct Drive mounting flange Reinforced crankcase for increased load capacity Enlarged crankcase increases oil capacity for better lubrication and lower operating temperatures One piece industrial grade oversized bronze connecting rods Maximum Pump Speed: 3400 RPM Minimum Horsepower Requirements: 9.3 hp for gas engines Shaft Diameter: Hollow 1" with gas engine flange Crankcase Capacity: 11 oz. use SAE 20W/30 oil
Fits Model
COMET : ZWD3035G-K

Replaces OEM
Universal : Comet :
On Sale!

Reg. Price: $518.40
$388.80
You Save $129.60
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1629
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 9.3" x 8.3" x 5.4"
Gallons Per Minute: 4.0
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 20 lbs
Equipment Type: Pressure Washer
PSI: 2000

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original InterPump unitized stainless steel Kit 1 inlet and outlet valves Standard 24mm soid shaft for pulley mounting Flex coupling and bell housing available for direct drive Ideal for all general cleaning/washing applications Maximum Pump Speed: 1750 RPM Minimum Horsepower Requirement: 5.5 bhp (8.2 hp for gas engine) Stroke: .394" Crankcase Capacity: 15.2 oz. nondetergent SAE 30W oil. Maximum fluid Temperature: 165° F Lubrication: fill the crankcase to the dot on the oil gauge window per specifications with SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : T9971

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $714.98
$536.24
You Save $178.74
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Duplex Plunger Pump

Part Number: 1967
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 8.8" x 6.8" x 5.4"
Gallons Per Minute: 2.1
Bore: 20mm (.787")
Outlet: 3/8" FPT
Shaft Size: 24mm
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 1000

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized stainless steel kit 1 inlet and outlet valves Ideal for drain cleaning and jetting applications Duplex pulsing action for improved impact cleaning Also available in "L" left handed version Maximum Inlet Pressure: 125 PSI Horsepower Requirements: 1.5 bhp (for gas multiply by 1.5) Maximum Pump Speed: 1750 RPM Stroke: 7.8mm (.307") Crankcase Capacity: 10.1 oz. Non-detergent SAE 30W Maximum Fluid Temperature: 165° F Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W nondetergent oil. Change oil after 40 hour break-in period. Change oil every three months or at 500 hour intervals thereafter Brake Horsepower: 1.50
Fits Model
GENERAL PUMP : T9721

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $457.88
$343.41
You Save $114.47
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Pump

Part Number: 1968
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 8.8" x 6.8" x 5.4"
Gallons Per Minute: 2.85
Bore: 20mm (.787")
Outlet: 3/8" FPT
Shaft Size: 24mm
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 1000

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized stainless steel kit 1 inlet and outlet valves Ideal for drain cleaning and jetting applications Duplex pulsing action for improved impact cleaning Also available in "L" left handed version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1750 RPM Stroke: .414" (10.5mm) Crankcase Capacity: 10.1 oz (nondetergent SAE 30W) Maximum Fluid Temperature: 165° F Brake Horsepower: 2.0
Fits Model
GENERAL PUMP : T9731

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $457.88
$343.41
You Save $114.47
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Pump

Part Number: 1971
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 8.8" x 6.8" x 5.4"
Gallons Per Minute: 2.2
Bore: 20mm (.787")
Outlet: 3/8" FPT
Shaft Size: 24mm
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 1000

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized stainless steel kit 1 inlet and outlet valves Ideal for drain cleaning and jetting applications Duplex pulsing action for improved impact cleaning Also available in "L" left handed version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1450 RPM Minimum Horsepower: 1.7 bhp (multiply by 1.5 for gas engines) Stroke: .374" (9.5mm) Crankcase Capacity: 10.1 oz. (nondetergent SAE 30W oil) Maximum Fluid Temperature: 165° F Brake Horsepower: 2.0
Fits Model
GENERAL PUMP : T721

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $457.88
$343.41
You Save $114.47
(25% Off)
 
No Sales Tax, except in MD
Qty:


15/16" T Series Solid Shaft Duplex Plunger Pump

Part Number: 1973
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 8.8" x 6.8" x 5.4"
Gallons Per Minute: 3.0
Bore: 20mm (.787")
Outlet: 3/8" FPT
Shaft Size: 24mm
Weight: 11 lbs
Equipment Type: Pressure Washer
PSI: 1200

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original Interpump unitized stainless steel kit 1 inlet and outlet valves Ideal for drain cleaning and jetting applications Duplex pulsing action for improved impact cleaning Also available in "L" left handed version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1450 RPM Minimum Horsepower Requirement: 2.4 bhp (multiply by 1.5 for gas engines) Stroke: .472" (12mm) Crankcase Capacity: 10.1 oz (nondetergent SAE 30W oil) Maximum Fluid Temperature: 165° F Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change Oil after 40 hour break-in period, then every three months or 500 hour intervals thereafter. Brake Horsepower: 3.00
Fits Model
GENERAL PUMP : T731

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $457.88
$343.41
You Save $114.47
(25% Off)
 
No Sales Tax, except in MD
Qty:


35mm Solid Shaft Triplex Plunger Pump

Part Number: 1974
 
Specs
Type: Solid Shaft Pump
Inlet: 3/4" FPT
Size: 12.9" x 11.9" x 7.3"
Gallons Per Minute: 12
Bore: 1.42" (36mm)
Outlet: 3/8" FPT
Shaft Size: Solid 1.38" (35mm)
Weight: 37 lbs
Equipment Type: Pressure Washer
PSI: 900

The industry's choice for high flow applications Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 650 RPM Minimum Horsepower Requirements: 7.4 bhp (11 hp for gas engines) Stroke: .945" (24mm) Crankcase Capacity: 50.7 oz. Nondetergent SAE 30W oil Maximum fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on the oil gauge window per specifications with Nondetergent SAE 30W oil.' Change the oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Pump Rails Included
Fits Model
GENERAL PUMP : T41

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $1,480.00
$1,110.00
You Save $370.00
(25% Off)
 
No Sales Tax, except in MD
Qty:


35mm Solid Shaft Triplex Plunger Pump

Part Number: 1975
 
Specs
Type: Solid Shaft Pump
Inlet: 1" FPT
Size: 15.6" x 14.0" x 9.5"
Gallons Per Minute: 17
Bore: 1.772" (45mm)
Outlet: 3/4" FPT
Shaft Size: Solid 1.38" (35mm)
Weight: 92 lbs
Equipment Type: Pressure Washer
PSI: 1000

The industry's choice for high flow applications Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 650 RPM Minimum Horsepower Requirements: 11.6 bhp (17.5 hp for gas engines) Stroke: .945" (24mm) Crankcase Capacity: 60.9 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on the oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : T61

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $4,255.68
$3,191.76
You Save $1,063.92
(25% Off)
 
No Sales Tax, except in MD
Qty:


35mm Solid Shaft Triplex Plunger Pump

Part Number: 1976
 
Specs
Type: Solid Shaft Pump
Inlet: 1" FPT
Size: 15.6" x 14.0" x 9.5"
Gallons Per Minute: 21
Bore: 1.772" (45mm)
Outlet: 3/4" FPT
Shaft Size: Solid 1.38" (35mm)
Weight: 92 lbs
Equipment Type: Pressure Washer
PSI: 1000

The industry's choice for high flow applications Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 650 RPM Minimum Horsepower Requirements: 14.4 bhp (21.6 hp for gas engines) Stroke: 1.102" (28mm) Crankcase Capacity: 60.9 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : T81

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $4,255.68
$3,191.76
You Save $1,063.92
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1977
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 9.3" x 8.3" x 5.4"
Gallons Per Minute: 3.5/4.0
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 18.7 lbs
Equipment Type: Pressure Washer
PSI: 1100/1500

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original InterPump unitized stainless steel Kit 1 inlet and outlet valves Standard 24mm soid shaft for pulley mounting Flex coupling and bell housing available for direct drive Ideal for all general cleaning/washing applications Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1750/1450 RPM Minimum Horsepower Requirements: 3.6 bhp (multiply by 1.5 for gas engines) Stroke: .394" (10mm) Crankcase Capacity: 15.2 oz. (nondetergent SAE 30W oil) Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 break-in period, then every 3 months or 500 hour intervals thereafter. Pump Rails Included
Fits Model
GENERAL PUMP : T991

Replaces OEM
Universal : General Pump : APU-3203
On Sale!

Reg. Price: $585.04
$438.78
You Save $146.26
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1982
 
Specs
Type: Solid Shaft Pump
Inlet: 3/8" FPT
Size: 7.0" x 6.9" x 5.1"
Gallons Per Minute: 3.43
Bore: .591" (15mm)
Outlet: 1/4" FPT
Shaft Size: Solid .945" (24mm)
Weight: 11.2 lbs
Equipment Type: Pressure Washer
PSI: 1500

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original InterPump unitized stainless steel Kit 1 inlet and outlet valves Standard 24mm soid shaft for pulley mounting Flex coupling and bell housing available for direct drive Ideal for all general cleaning/washing applications Maximum Pump Speed: 2800 RPM Minimum Horsepower Requirements: 3.5 bhp (5.5 hp gas engine) Stroke: .370" (9.4mm) Crankcase Capacity: 11.2 oz. nondetergent SAE 30W oil. Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change oil after 40 hour break-in period, then every three months or 500 hour intervals thereafter. Pump Rails NOT Included
Fits Model
GENERAL PUMP : TT941

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $398.74
$299.06
You Save $99.68
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1983
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 9.3" x 8.3" x 5.4"
Gallons Per Minute: 3.5
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 18.7 lbs
Equipment Type: Pressure Washer
PSI: 1500

Forged brass manifold with an exclusive lifetime warranty Die cast, anodized aluminum oil bath crankcase Solid ceramic plungers with continuously lubricated packings The original InterPump unitized stainless steel Kit 1 inlet and outlet valves Standard 24mm soid shaft for pulley mounting Flex coupling and bell housing available for direct drive Ideal for all general cleaning/washing applications Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1750 RPM Minimum Horsepower Requirements: 3.6 bhp (5.4 hp gas engine) Stroke: .335" (8.5mm) Crankcase Capacity: 15.2 oz. nondetergent SAE 30W oil. Maximum Fluid Temperature: 165 F. Lubrication: fill the crankcase to the dot on the oil gauge window pe specifications with SAE 30W oil. Change oil after 40 hour break-in period, then every three months or 500 hour intervals thereafter. Pump Rails Included
Fits Model
GENERAL PUMP : T9951

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $585.04
$438.78
You Save $146.26
(25% Off)
 
No Sales Tax, except in MD
Qty:


35mm Solid Shaft Triplex Plunger Pump

Part Number: 1986
 
Specs
Type: Solid Shaft Pump
Inlet: 3/4" FPT
Gallons Per Minute: 8.0
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid 1.38" (35mm)
Weight: 46 lbs
Equipment Type: Pressure Washer
PSI: 1600

The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1450 RPM Minimum Horsepower Requirements: 8.8 bhp (13.2 hp for gas engines) Stroke: .886" (22.5mm) Crankcase Capacity: 50.7 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on the oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. Pump Rails Included
Fits Model
GENERAL PUMP : TS1041

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $1,662.22
$1,246.67
You Save $415.55
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1990
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 11.4" x 9.2" x 6.9"
Gallons Per Minute: 5.0
Bore: .866" (22mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 30 lbs
Equipment Type: Pressure Washer
PSI: 1700

The preferred pump frame in the cleaning industry Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1050 RPM Minimum Horsepower requirements: 5.8 bhp (8.8 hp for gas engines) Stroke: .630" (16mm) Crankcase Capacity: 33.8 oz. nondetergent SAE 30W oil. Maximum Fluid Temperature: 165° F Lubrication: Fill the crankcase to the dot on the oil gauge window per specifications with SAE 30W oil. Change the oil after a 40 hour break-in period, then every 3 months or 500 hour interfals thereafter. Pump Rails Included Forged brass manifold with an exdlusive lifetime warranty
Fits Model
GENERAL PUMP : T921

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $717.12
$537.84
You Save $179.28
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1992
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 11.4" x 9.2" x 6.9"
Gallons Per Minute: 4.5/5.6
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 30 lbs
Equipment Type: Pressure Washer
PSI: 2000/1500

Pump Rails Included The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1125/1450 RPM Minimum Horsepower Requirements: 6.2 bhp (9.3 hp for gas engines) Stroke: .630" (16mm) Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165° F Lubrication: fill the crankcase to the dot on the oil gauge window per specifications with SAE 30W oil. Change the oil after a 40 hour break-in period, then every 3 months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : T1011

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $717.12
$537.84
You Save $179.28
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1994
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 11.4" x 9.2" x 6.9"
Gallons Per Minute: 4.0/4.75
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 30 lbs
Equipment Type: Pressure Washer
PSI: 2000/1500

Pump Rails Included Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1450/1750 RPM Minimum Horsepower Requirements: 5.5 bhp (8.2 hp for gas engines) Stroke: .472" (12mm) Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to the dot on the oil gauge window pe specifications with SAE 30W oil. Change the oil after a 40 hour break in period, then every three (3) months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : TS1011

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $717.12
$537.84
You Save $179.28
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1996
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 12.2" x 9.2" x 6.9"
Gallons Per Minute: 4.75
Bore: .866" (22mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 32 lbs
Equipment Type: Pressure Washer
PSI: 2100

Minimum Inlet Pressure: 125 PSI Maximum Pump speed: 1450 RPM Minimum Horsepower Requirements: 6.8 bhp (10.2 hp for gas engines) Stroke: .472" (12mm) Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil Maximum fluid Temperature: 165° F. Lubrication: Fill crankcase to dot on oil gauge window per specifications with nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter. The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version
Fits Model
GENERAL PUMP : TS1321

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $738.36
$553.77
You Save $184.59
(25% Off)
 
No Sales Tax, except in MD
Qty:


24mm T Series Solid Shaft Triplex Plunger Pump

Part Number: 1997
 
Specs
Type: Solid Shaft Pump
Inlet: 1/2" FPT
Size: 12.2" x 9.2" x 6.9"
Gallons Per Minute: 5.5
Bore: .866" (22mm)
Outlet: 3/8" FPT
Shaft Size: Solid .945" (24mm)
Weight: 32 lbs
Equipment Type: Pressure Washer
PSI: 2100

The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1150 RPM Minimum Horsepower Requirements: 7.9 bhp (11.9 hp for gas engines) Stroke: .630" (16mm) Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent Sae 30W oil. Change oil after 40 hour brak-in period, then every three (3) months or 500 hour intervals thereafter. Pump Rails Included
Fits Model
GENERAL PUMP : T1321

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $738.36
$553.77
You Save $184.59
(25% Off)
 
No Sales Tax, except in MD
Qty:


35mm Solid Shaft Triplex Plunger Pump

Part Number: 1998
 
Specs
Type: Solid Shaft Pump
Inlet: 3/4" FPT
Size: 13.0" x 11.8" x 7.3"
Gallons Per Minute: 7.9
Bore: .787" (20mm)
Outlet: 3/8" FPT
Shaft Size: Solid 1.38" (35mm)
Weight: 47 lbs
Equipment Type: Pressure Washer
PSI: 2175

The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version Maximum Pump Speed: 1450 RPM Minimum Horsepower Requirements: 12 bhp (18 hp for gas engines) Stroke: .946" (24mm) Crankcase Capacity: 50.7 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 breakl-in period, then every three (3) months or 500 hour intervals thereafter Pump Rails Included
Fits Model
GENERAL PUMP : TS1531

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $2,145.74
$1,609.31
You Save $536.43
(25% Off)
 
No Sales Tax, except in MD
Qty:


35mm Solid Shaft Triplex Plunger Pump

Part Number: 1999
 
Specs
Type: Solid Shaft Pump
Inlet: 1" FPT
Size: 15.6" x 14.0" x 9.4"
Gallons Per Minute: 14
Bore: 1.18" (30mm)
Outlet: 3/4" FPT
Shaft Size: Solid 1.38" (35mm)
Weight: 92.7 lbs
Equipment Type: Pressure Washer
PSI: 2175

Pump Rails Included The industry's choice for high flow applications Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Maximum Inlet Pressure: 125 PSI Maximum Pump Speed: 1000 RPM Minimum Horsepower Requirements: 20.9 bhp (31.3 hp for gas engines) Stroke: 1.10" (28mm) Crankcase Capacity: 91 oz. Nondetergent SAE 30W oil Maximum Fluid Temperature: 165 degrees F. Lubrication: Fill the crankcase to dot on the oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Fits Model
GENERAL PUMP : T1551

Replaces OEM
Universal : General Pump :
On Sale!

Reg. Price: $5,523.72
$4,142.79
You Save $1,380.93
(25% Off)
 
No Sales Tax, except in MD
Qty: