Do It Yourself Section My Garage Section Parts Look Up

Over 1,000,000 Orders Shipped Since 1997!

Do It Yourself - Outdoor Power Equipment Repair & Maintenance

Toro Snow Blower Oil Change

article Posted in Snow Blowers by

Is your Toro Snow Blower in need of an oil change? Keep your Toro Snow Blower running properly all winter by following an oil change schedule. Performing regular maintenance on your snow blower can keep it prepared for the next big snow storm.

Before starting, refer to your owner's manual for your snow blowers oil change schedule, the oil recommended for your snow blower, and any specific tools needed for your snow blower model.

Tools Needed:

*Before servicing your snow blower make sure the snow blower is turned off and remove the ignition key to reduce the risk of accidental start-up.

Changing the Oil

1) Warm the Engine

Start the engine for a few minutes to warm the oil, allowing it to drain easier. Once oil is warmed, shut the engine off and allow it to cool before servicing your snow blower.

2) Remove Oil Dipstick

Remove the oil dipstick.

3) Locate Oil Drain Plug

Locate Oil Drain

4) Oil Drain Pan

Place oil drain pan

Catch the oil as it drains by placing an oil drain pan under the oil drain plug.

5) Drain Oil

Drain the Oil

Drain the oil by loosening the drain plug with your socket wrench, making sure to catch it with the drain pan.

6) Reinstall Oil Drain Plug

Reinstall oil drain plug.

7) Refill With New Oil

Refill with new oil.

Place the funnel in the oil fill tube and fill with 5W-30 oil.

8) Check Oil Level

Check oil level..

Check the oil level after refilling, as well as before and after every use. Check the oil level by looking at the oil dipstick.

9) Reinstall Oil Dipstick

Check oil level..

Twist the oil dipstick back into the oil fill tube and clean up any excess oil.

10) Check for Leaks

Check for any oil leaks by starting the engine for a few minutes.

Conclusion:

By following an oil change schedule you can keep your snow blower running all winter long. Make sure to check your oil level before and after every use to make sure you have the correct amount to run your snow blower. Fill or change if needed.

Keep your snow blower prepared for the next storm and prolong the life of your engine by performing regular oil changes.


Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.