Blue Top Water Filter

Equipment Type Pressure Washer
Equipment Type Under Sink Residential Water
Equipment Type Vending Equipment
PSI 145 PSI Working Pressure
PSI 508 PSI Burst Pressure
Size 10"
Inlet 1" FPT
Outlet 1" FPT
Includes Top & Bowl
One of the major problems affecting the proper functioning of pressure washers is contaiminated water. By nature, water is a carrier of minerals, iron, dirt, rust, and other contaminants. Problems caused by this contamination could be clogging of the float tank, and pump inlet. The particles can get into the pump and cause wear on the packings and valves or crack the ceramic pistons. Unloaders are prone to damage if the water is not clean. Every pressure washer system, whether it is pulling water from a city water supply, water tank, stream or pond should have a quality water filter installed on the inlet side of the pump.
Can Also Be used for Calcium Removal System
Remove calcium deposits from your water supply and extend the life of your pump, and your heating element on hot water pressure washers. Connect the Blue top to the inlet of your pump. No back flushing necessary. The Phosphate material will dissolve as it removes the calcium from the water.